● A CNT filter enabled effective KMnO4 activation via facilitated electron transfer. ● Ultra-fast degradation of micropollutants were achieved in KMnO4/CNT system. ● CNT mediated electron transfer process from electron-rich molecules to KMnO4. ● Electron transfer dominated organic degradation. Numerous reagents have been proposed as electron sacrificers to induce the decomposition of permanganate (KMnO4) by producing highly reactive Mn species for micropollutants degradation. However, this strategy can lead to low KMnO4 utilization efficiency due to limitations associated with poor mass transport and high energy consumption. In the present study, we rationally designed a catalytic carbon nanotube (CNT) membrane for KMnO4 activation toward enhanced degradation of micropollutants. The proposed flow-through system outperformed conventional batch reactor owing to the improved mass transfer via convection. Under optimal conditionals, a > 70% removal (equivalent to an oxidation flux of 2.43 mmol/(h·m2)) of 80 μmol/L sulfamethoxazole (SMX) solution can be achieved at single-pass mode. The experimental analysis and DFT studies verified that CNT could mediate direct electron transfer from organic molecules to KMnO4, resulting in a high utilization efficiency of KMnO4. Furthermore, the KMnO4/CNT system had outstanding reusability and CNT could maintain a long-lasting reactivity, which served as a green strategy for the remediation of micropollutants in a sustainable manner. This study provides new insights into the electron transfer mechanisms and unveils the advantages of effective KMnO4 utilization in the KMnO4/CNT system for environmental remediation. 相似文献
● Medium poly Al salts dominated the PAC residual salts with a rational dosage. ● Settlement flocculation effect under medium poly Al salts showed a better trend. ● Complex of medium poly Al salts and enzymes promoted cell activity. ● Medium poly Al salts were beneficial to the effluent indexes. With the widespread introduction of pre-coagulation prior to the biological unit in various industrial wastewater treatments, it is noteworthy that long-term accumulation of residual coagulants has certains effect on both micro and macro characteristics of activated sludge (AS). In this study, the morphology distributions of residual aluminum salts (RAS) and their effects on the removal efficiency of AS were investigated under different PAC concentrations. The results showed that the dominance of medium polymeric RAS, formed under an appropriate PAC dose of 20 mg/L enhanced the hydrophobicity, flocculation, and sedimentation performances of AS, as well as the enzymatic activity in cells in the sludge system, improving the main pollutants removal efficiency of the treatment system. Comparatively the species composition with monomer and dimer / high polymer RAS as the overwhelming parts under an over-dosed PAC concentration of 55 mg/L resulted in excessive secretion of EPS with loose flocs structure and conspicuous inhibition of cellular activity, leading to the deterioration of physico-chemical and biological properties of AS. Based on these findings, this study can shed light on the role of the RAS hydrolyzed species distributions, closely relevant to Al dosage, in affecting the comprehensive properties of AS and provide a theoretical reference for coagulants dosage precise control in the pretreatment of industrial wastewater. 相似文献
● A new adsorption-membrane separation strategy is used for phosphate removal.● PVC/Zr-BT shows a selective adsorption ability to low-concentration phosphate.● Low concentration of P below 0.05 mg/L was achieved in actual wastewater treatment.● Algal biomass production served as a demonstration of phosphorus recycling. Enhanced phosphorus treatment and recovery has been continuously pursued due to the stringent wastewater discharge regulations and a phosphate supply shortage. Here, a new adsorption-membrane separation strategy was developed for rational reutilization of phosphate from sea cucumber aquaculture wastewater using a Zr-modified-bentonite filled polyvinyl chloride membrane. The as-obtained polyvinyl chloride/Zr-modified-bentonite membrane was highly permeability (940 L/(m2·h)), 1–2 times higher than those reported in other studies, and its adsorption capacity was high (20.6 mg/g) when the phosphate concentration in water was low (5 mg/L). It remained stable under various conditions, such as different pH, initial phosphate concentrations, and the presence of different ions after 24 h of adsorption in a cross-flow filtration system. The total phosphorus and phosphate removal rate reached 91.5% and 95.9%, respectively, after the membrane was used to treat sea cucumber aquaculture wastewater for 24 h and no other water quality parameters had been changed. After the purification process, the utilization of the membrane as a new source of phosphorus in the phosphorus-free f/2 medium experiments indicated the high cultivability of economic microalgae Phaeodactylum tricornutum FACHB-863 and 1.2 times more chlorophyll a was present than in f/2 medium. The biomass and lipid content of the microalgae in the two different media were similar. The innovative polyvinyl chloride/Zr-modified-bentonite membrane used for phosphorus removal and recovery is an important instrument to establish the groundwork for both the treatment of low concentration phosphate from wastewater as well as the reuse of enriched phosphorus in required fields. 相似文献
● Established a quantification method of pollutant emission standard.● Predicted the SO2 emission intensity of single coking enterprises in China. ● Evaluated the influence of pollutant discharge standard on prediction accuracy.● Analyzed the SO2 emissions of Chinese provincial and municipal coking enterprises. Industrial emissions are the main source of atmospheric pollutants in China. Accurate and reasonable prediction of the emission of atmospheric pollutants from single enterprise can determine the exact source of atmospheric pollutants and control atmospheric pollution precisely. Based on China’s coking enterprises in 2020, we proposed a quantitative method for pollutant emission standards and introduced the quantification results of pollutant emission standards (QRPES) into the construction of support vector regression (SVR) and random forest regression (RFR) prediction methods for SO2 emission of coking enterprises in China. The results show that, affected by the types of coke ovens and regions, China’s current coking enterprises have implemented a total of 21 emission standards, with marked differences. After adding QRPES, it was found that the root mean squared error (RMSE) of SVR and RFR decreased from 0.055 kt/a and 0.059 kt/a to 0.045 kt/a and 0.039 kt/a, and theR2 increased from 0.890 and 0.881 to 0.926 and 0.945, respectively. This shows that the QRPES can greatly improve the prediction accuracy, and the SO2 emissions of each enterprise are highly correlated with the strictness of standards. The predicted result shows that 45% of SO2 emissions from Chinese coking enterprises are concentrated in Shanxi, Shaanxi and Hebei provinces in central China. The method created in this paper fills in the blank of forecasting method of air pollutant emission intensity of single enterprise and is of great help to the accurate control of air pollutants. 相似文献
The capillary model was used to analyze the hydraulic conditions in the deep bed filtration process. The physicochemical interaction forces between the filter media and suspended particles and their influence on deep bed filtration process were also studied theoretically. Through the comparison of the hydraulic and physicochemical forces, the key influencing factors on the filtration process were proposed and investigated. Pilot study of the microflocculation deep bed filtration was carried out in the No. 9 Potable Water Treatment Plant of Beijing, and the experimental results of hydraulic head loss, particle distribution and entrapment were presented. The theoretical prediction was reasonably consistent with the experimental results under different conditions, which indicated that the regulation and control of micro-flocculation and deep bed filtration could be realized by the evaluation of the physicochemical interactions. Further theoretical and experimental research should be carried out to investigate the interaction mechanism and its application in the deep bed filtration and other cases. 相似文献