Physico-chemical characterization and source tracking of black carbon at a suburban site in Beijing

Particles from ambient air and combustion sources including vehicle emission, coal combustion and biomass burning were collected and chemically pretreated with the purpose of obtaining isolated BC (black carbon) samples. TEM (transmission electron microscopy) results indicate that BC from combustion sources shows various patterns, and airborne BC appears spherical and about 50 nm in diameter with a homogeneous surface and turbostratic structure. The BET (Barrett–Emmett–Teller) results suggest that the surface areas of these BC particles fall in the range of 3–23 m²/g, with a total pore volume of 0.03–0.05 cm³/g and a mean pore diameter of 7–53 nm. The nitrogen adsorption–desorption isotherms are indicative of the accumulation mode and uniform pore size. O₂-TPO (temperature programmed oxidation) profiles suggest that the airborne BC oxidation could be classified as the oxidation of amorphous carbon, which falls in the range of 406–490°C with peaks at 418, 423 and 475°C, respectively. Generally, the BC characteristics and source analysis suggest that airborne BC most likely comes from diesel vehicle emission at this site.     

Phosphorus recovery from biogas fermentation liquid by Ca-Mg loaded biochar

Shortage in phosphorus (P) resources and P wastewater pollution is considered as a serious problem worldwide. The application of modified biochar for P recovery from wastewater and reuse of recovered P as agricultural fertilizer is a preferred process. This work aims to develop a calcium and magnesium loaded biochar (Ca-Mg/biochar) application for P recovery from biogas fermentation liquid. The physico-chemical characterization, adsorption efficiency, adsorption selectivity, and postsorption availability of Ca-Mg/biochar were investigated. The synthesized Ca-Mg/biochar was rich in organic functional groups and in CaO and MgO nanoparticles. With the increase in synthesis temperature, the yield decreased, C content increased, H content decreased, N content remained the same basically, and BET surface area increased. The P adsorption of Ca-Mg/biochar could be accelerated by nano-CaO and nano-MgO particles and reached equilibrium after 360 min. The process was endothermic, spontaneous, and showed an increase in the disorder of the solid-liquid interface. Moreover, it could be fitted by the Freundlich model. The maximum P adsorption amounts were 294.22, 315.33, and 326.63 mg/g. The P adsorption selectivity of Ca-Mg/biochar could not be significantly influenced by the typical pH level of biogas fermentation liquid. The nano-CaO and nano-MgO particles of Ca-Mg/biochar could reduce the negative interaction effects of coexisting ions. The P releasing amounts of postsorption Ca-Mg/biochar were in the order of Ca-Mg/B600 > Ca-Mg/B450 > Ca-Mg/B300. Results revealed that postsorption Ca-Mg/biochar can continually release P and is more suitable for an acid environment.     

良好质量控制下环境监测方法的选用

经济不断发展,社会对环境保护的要求日趋加强,为保证环境安全,为环保监察执法出具准确、科学、公正的监测数据变得日益重要。本文对选用合适的监测方法进行监测进行初步的探讨。确定了监测范围,在良好的环境质量控制下选择合适的方法,确保监测程序稳定可靠,更好的为环境管理服务。     

河流恶臭控制因子分析

浑河治理的成功为国内外其它同类河流的治理提供了成功经验,而治理过程中分析得出的河流恶臭控制因子具有普遍适用性,本文就河流恶臭控制因子进行了论述。     

非灭菌环境投加染料时间对白腐真菌降解活性染料的影响

应用氮限制液体培养基(C/N=56／8．7)研究了非灭菌环境投加染料时间对白腐真菌Phanerochaete chrysosporium降解活性艳红K-2BP染料的影响．试验结果表明,纯培养2d和3d后,在非灭菌环境投加活性艳红K-2BP染料的体系脱色率与在灭菌环境投加该染料的体系基本相当,其5d脱色率在90％以上;而纯培养ld时在非灭菌环境投加染料体系的脱色率却只有8l％．引起纯培养ld体系脱色率降低的主要原因是活性艳红K-2BP对白腐真菌Phanerochaete chrysosporium的生长有抑制作用和反应体系感染了酵母菌．但是,如果纯培养延长至2d以后,由于白腐真菌菌丝体已在体系内占优势,尽管在非灭菌环境下还有酵母菌侵入,但它不会占优势,从而也就不会影响白腐真菌对染料的降解作用．因此,在氮限制液体培养基中,只要白腐真菌Phanerochaete chrysosporium在反应体系占优势,就可以适当缩短纯培养时间,提前在非灭菌环境投加染料,使白腐真菌Phanerochaete chrysosporium的培养和对活性染料的脱色同步进行．     

自动消解仪-ICP法测定土壤中7种重金属离子实验研究

利用自动消解仪对土壤进行前处理,建立了电感耦合等离子体发射光谱法(ICP-OES)同时测定Cu、Zn、Ni、Cr、Sr、V、Co七种重金属元素含量的方法。该方法的相关系数均在3个9以上。测定了国家标准物质GBW07429土壤中的元素,测定值与标准值一致,相对标准偏差1.6%~4.5%,检出限0.000 2~0.005 mg/L。利用建立的方法测定了天津市土壤中的七种重金属元素含量,为土壤中重金属元素含量的测定提供了简单可靠的分析方法。     

江湖关系演变对洞庭湖水质变化影响研究

利用长江中下游地区监测站点1950~2009年逐日水文监测数据及1995~2010年水质分析资料,结合Spearman相关分析和综合污染指数评价法,分析了长江中下游江湖关系演变对洞庭湖水质变化影响,并面向洞庭湖水环境安全提出一系列调控措施,旨在为洞庭湖地区水质改善提供理论基础与技术支持。     

河鲈锚首吸虫及其宿主鳜鱼组织器官中铅含量的比较

利用原子吸收分光光度计分析了寄生鳜鱼（Sinipercachuatsi）鳃部的河鲈锚首吸虫（Ancyrocephalusmogurndae）及其宿主组织器官,包括肌肉、鳃、头肾和肝脏的铅含量.结果表明,来自三湖连江水库和牛山湖两个采样点的河鲈锚首吸虫的铅含量都显著地高于其宿主组织器官中的铅含量.在所检测的宿主组织器官中,肝脏的铅含量最高,在两个采样点分别为0.138和0.114μg/g（湿重）.河鲈锚首吸虫富集铅的机理及其较高水平铅含量的特点是否与其体外寄生的特性有关,尚有待于进一步研究.     

废电池的环境污染及资源化价值分析

分析了各类废电池的资源化,安再生利用价值由高到低顺序依次为铅酸蓄电池、镍镉、镍氢电池、普通干电池。电池中含有的主要污染物质包括重金属以及酸、碱等电解质溶液。对环境和人体健康危害较大的废电池类别主要为：（1）含汞电池，指氧化汞电池，部分汞含量较高的锌锰和碱锰干电池；（2）铅酸蓄电池；（3）含镉电池，主要是Ni-Cd电池。废电池中化学物质释放进入环境过程是在电池包壳破损后发生的，或者是电池包壳本身发生浸蚀作用。普通家用干电池中的污染物质大多呈固态，由电池内部迁移到环境中是一种缓慢的过程。文中还分析了废电池污染环境的主要途径、采用各种不同处理、处置方式管理废电池可能引起的环境污染。     

挥发性有机硫化合物释放及对全球环境的影响

介绍了几种挥发性有机硫化合物：甲硫醚（DMS）、羰基硫（COS）、甲硫醇（MSH或CH3SH）、二硫化碳（CS2）和二甲基二硫（DMDS)从各种自然源（主要是生物源）释放的情况，并论述了有机硫气体释放对全球环境和气候的影响。着重阐述了在海洋、陆地生态系统中，各种生物硫源的释放情况和有机硫气体的迁移、转化规律。讨论了大气中痕量有机硫气体的分析方法，并提出一些建议。