Recent advances in antimony removal using carbon-based nanomaterials: A review

• The synthesis and physicochemical properties of various CNMs are reviewed. • Sb removal using carbon-based nano-adsorbents and membranes are summarized. • Details on adsorption behavior and mechanisms of Sb uptake by CNMs are discussed. • Challenges and future prospects for rational design of advanced CNMs are provided. Recently, special attention has been deserved to environmental risks of antimony (Sb) element that is of highly physiologic toxicity to human. Conventional coagulation and ion exchange methods for Sb removal are faced with challenges of low efficiency, high cost and secondary pollution. Adsorption based on carbon nanomaterials (CNMs; e.g., carbon nanotubes, graphene, graphene oxide, reduced graphene oxide and their derivatives) may provide effective alternative because the CNMs have high surface area, rich surface chemistry and high stability. In particular, good conductivity makes it possible to create linkage between adsorption and electrochemistry, thereby the synergistic interaction will be expected for enhanced Sb removal. This review article summarizes the state of art on Sb removal using CNMs with the form of nano-adsorbents and/or filtration membranes. In details, procedures of synthesis and functionalization of different forms of CNMs were reviewed. Next, adsorption behavior and the underlying mechanisms toward Sb removal using various CNMs were presented as resulting from a retrospective analysis of literatures. Last, we prospect the needs for mass production and regeneration of CNMs adsorbents using more affordable precursors and objective assessment of environmental impacts in future studies.     

Study of water quality response to water transfer patterns in the receiving basin and surrogate model

Environmental Science and Pollution Research - The spatio-temporal response of water quality in the receiving basins to water transfer remains unclear when considering more practical factors....     

Does leakage exist in China’s typical protected areas? Evidence from 13 national nature reserves

Environmental Science and Pollution Research - There is profound interest in knowing the degree to which the effectiveness of China’s nature reserves, and whether leakage is common around the...     

煤灰预处理-好氧生物技术处理有机废水的研究

介绍了煤灰预处理-好氧生物技术对有机废水的处理研究。结果表明,当有机废水中COD_Cr为1162mg/L,SS为382mg/L时,该技术对有机废水COD_Cr的去除率达96.9%,悬浮物的去除率达91.5%,处理废水的运行费用为0.22元/t。      

德阳市旅游特色及其开发对策

以德阳市旅游资源为研究对象,进行了旅游资源评价,并剖析了旅游产业发展过程中出现的问题,提出了具体对策。     

前混合式磨料射流系统的容积效应及有关安全问题

前混合式磨料射流系统具有明显的容积效应。通常情况下 ,系统在停止工作压力降低时 ,磨料罐将排出约 1 L的浆液 ,在长 5 m以上的管路中淤积 ;重新工作时 ,将造成喷嘴和管路的严重磨损 ,甚至造成堵塞 ,使系统不能正常工作。为此 ,笔者提出了一种新型的射流发生系统 ,改善系统的容积效应 ,在其停止工作时 ,采用了磨料罐从上方排出清水以降低系统压力方法 ,改善磨料大量涌出和管路淤积现象 ,同时也对管接头等磨蚀引起的有关安全问题进行了讨论。     

垃圾填埋场稳定化及其研究现状

文章对直埋场稳定化过程进行了初步描述,并从填埋气、渗滤液、垃圾组成和沉降等４个方面总结了填埋场稳定化的研究现状。     

真空紫外光降解苯的研究

为了考察真空紫外光辐射在气体净化中的应用,以苯作为目标污染物,分别进行了紫外光波长、气体湿度、反应时间、初始浓度以及辐射功率对苯光解率的影响实验。实验结果表明,真空紫外光辐射方法净化气相污染物中的苯效果良好,在一定条件下,浓度为348.2 mg/m³苯污染气体真空紫外光降解率可达到90%。通过在不同条件下苯的降解率以及臭氧浓度变化,初步探讨了苯降解的机理以及降解途径。苯的降解主要是通过氢氧自由基（·OH）的加成以及后续一系列的氧化反应,降解产物为苯酚以及含有羟基的长链烃。     

沉积方向对珊瑚砂动剪切模量及阻尼比的影响∗

复杂地质赋存环境下珊瑚砂具有显著的各向异性特征,颗粒的沉积方向显著影响其动力特性。对南沙岛礁珊瑚砂开展均等固结的共振柱试验,探究了珊瑚砂颗粒的沉积方向角 φ（沉积面与水平面的夹角）和初始有效固结围压对其动剪切模量 G 和阻尼比 λ 的影响。在给定 φ 下,G 随剪应变幅值 γ_a增大而减小的速率随 的增大而增加;给定 下,G 随 γ_a增大而减小的速率随 φ 增大呈现先减后增的趋势,φ = 60°时 G—γ_a曲线位于最下方。最大动剪切模量 G₀随 φ 的增大表现出先减后增的现象,且 φ 对 G₀的影响随 的增大而降低。建立了考虑 φ 和 影响的修正 Hardin 模型,预测和量测的 G₀值偏差小于 10%。动剪切模量比 G/G₀—γ_a曲线对 φ 不敏感,结合修正 Hardin 模型和 Davidenkov 骨架曲线预测和量测的 G 值偏差小于 15%。在陈国兴等（2006）提出的阻尼比经验模型中引入 φ 影响的修正项,预测和量测的 λ 值偏差小于 20%。     

聚四氟乙烯高压密封罐消解样品测定五氧化二钒

利用聚四氟乙烯高压密封罐消解矿石样品测定五氧化二钒,具有操作手续相对简便、轻松、快捷等优点,与传统的硫酸－磷酸混合酸消解或采用碱熔融前处理法比较,相对误差小于１．６％,样品的添加标准回收率为９２．９％～１０３．５％。