The application and development of country-specific parameters for accurate estimations of methane emissions from solid-waste disposal sites

To identify the application and development of country-specific parameters for methane emission estimations from solid-waste disposal sites, National Inventory Reports of 41 Annex I countries and National Communications of ten non-Annex I countries of the United Nations Framework Convention on Climate Change were analyzed. A first-order decay method was applied to 38 out of 41 Annex I countries and to five out of ten non-Annex I countries in national GHG inventory submissions up to 2012. Country-specific parameters were approximately 26 % of the total number of parameters used in the 38 Annex I countries and were mostly developed for degradable organic carbon and reaction constants that cover certain waste compositions. The UNFCCC encourages countries to develop more country-specific parameters reflecting the distinct characteristics of each country in which solid-waste disposal site is a key source. Depending on a country’s condition, a stepwise approach regarding the development of country-specific parameters needs to be done so as to improve the accuracy of methane emission estimates in the solid-waste disposal site category.     

Flood Risk Reduction from Agricultural Best Management Practices

Best management practices (BMPs) play an important role in improving impaired water quality from conventional row crop agriculture. In addition to reducing nutrient and sediment loads, BMPs such as fertilizer management, reduced tillage, and cover crops could alter the hydrology of agricultural systems and reduce surface water runoff. While attention is devoted to the water quality benefits of BMPs, the potential co‐benefits of flood loss reduction are often overlooked. This study quantifies the effects of selected commonly applied BMPs on expected flood loss to agricultural and urban areas in four Iowa watersheds. The analysis combines a watershed hydrologic model, hydraulic model outputs, and a loss estimation model to determine relationships between hydrologic changes from BMP implementations and annual economic flood loss. The results indicate a modest reduction in peak discharge and economic loss, although loss reduction is substantial when urban centers or other high‐value assets are located downstream in the watershed. Among the BMPs, wetlands, and cover crops reduce losses the most. The research demonstrates that watershed‐scale implementation of agricultural BMPs could provide benefits of flood loss reduction in addition to water quality improvements.     

Toluene vapor capture by activated carbon particles in a dual gas-solid cyclone system

Capturing of odorous compounds such as toluene vapor by a particulate-activated carbon adsorbent was investigated in a gas-solid cyclone, which is one type of mobile beds. The test cyclone was early modified with the post cyclone (PoC) and a spiral flow guide to the vortex finder. The proposed process may contribute to the reduction of gases and dust from industrial exhausts, especially when dealing with a low concentration of odorous elements and a large volume ofdust flow. In this device, the toluene capturing efficiency at a 400 ppm concentration rose up to 77.4% when using activated carbon (AC) particles with a median size of 27.03 microm. A maximum 96% of AC particles could be collected for reuse depending on the size and flow rate. The AC regenerated via thermal treatment showed an adsorption potential up to 66.7% throughout repeated tests.     

Climate,land, energy and water (CLEW) interlinkages in Burkina Faso: An analysis of agricultural intensification and bioenergy production

This paper discusses climate, land, energy and water (CLEW) interactions in Burkina Faso. It shows that integrated assessments of resource use at the national level can provide important insights and benefits, especially for a resource constrained least developed country. Agricultural policy is shown to have strong implications for energy use, whereas energy policies are found to be strongly interrelated with water constraints. Without an integrated and coordinated approach, strategy and policy formulation efforts to increase energy, food and water security could become both incoherent and counter‐productive.     

The Onset of Electrical Breakdown in Dust Layers: I,Microsparking Described by Paschen’s Law

The onset of electrical breakdown in dust layers has been studied for hand-deposited dust layers in a parallel plate geometry. It was found that the breakdown was an ordinary electron avalanche process originating in voids within the dust layer and obeying Paschen’s Law. The size of voids where breakdown occurs was in the range of 10 to 20 μm for the layers used. The distribution of particle sizes in a sample Influences its breakdown through changes in the average void dimension where breakdown takes place. Water vapor in the test environment, which affects the electrical conduction mechanism prior to breakdown, lowered the average electric field required to initiate breakdown. Moderate compaction of the sample had little or no effect on its breakdown behavior.     

Influence of pleat geometry on filter cleaning in PTFE/glass composite filter

A pleated filter bag is often used to treat exhaust gas in many industrial applications, due to its fairly high dust collection efficiency and relatively low pressure drop. This work deals with the optimum pleating geometries of a pleated filter made with a newly developed PTFE/glass composite filter. It was found that pleating geometries, including pleat height and pleat pitch, directly affect the cleaning efficiency. The design index, α, which stands for the ratio of pleat height to pleat pitch, is 1.48 for optimum operation. When the α value was higher than 1.48, the pressure drop across the pleated filter medium increased, resulting in a decreased cleaning interval due to the difficulty of filter cleaning. Therefore, it is necessary that the optimum pleating geometry should be determined by employing the dimensionless parameter, α, in the design of cartridge filters.

Implications: A pleated filter bag is often used to treat exhaust gas in many industrial applications due to its fairly high dust collection efficiency and relatively low pressure drop. The present paper introduces an optimum design configuration to make a pleated filter with newly developed PTFE/glass composite filter media. A dimensionless parameter that is the ratio of pleat height to pleat pitch should be considered to make the best quality pleated filter.     

Effect of alkali catalyst on biodiesel production in South Korea from mixtures of fresh soybean oil and waste cooking oil

Biodiesel from waste cooking oil (WCO) and soybean oil (SO) mixture was produced by changing the alkali catalyst (NaOH) content and the WCO to SO ratio in the feedstock. All the prepared biodiesel samples satisfied the standard requirement in terms of free glycerol, density, and acid value. The minimum catalyst content and the highest WCO composition to get biodiesel from the WCO/SO mixture feedstock without ruining the biodiesel properties were 1.0 and 60 wt %, respectively. This conclusion implies that the waste cooking oil mixture, which contains 40 wt % fresh soybean oil, could be treated like the fresh soybean oil to produce biodiesel, and that this behavior would be helpful to reduce the biodiesel production cost when waste cooking oil used as feedstock. The unsaturated methyl esters such as linoleic, and oleic acid were dominant (almost 80 % w/w) in the fresh soybean oil. However the saturated methyl ester was increased due to the double bond breaking during the frying process. These results may deteriorate the biodiesel quality by changing the methyl ester composition.     

Microbially mediated aerobic and anaerobic degradation of acrylamide in a western United States irrigation canal

Acrylamide (AMD), a neurotoxin and suspected carcinogen, is present at concentrations of up to 0.05% in linear anionic polyacrylamide, which is under evaluation as a temporary sealant in unlined irrigation canal systems across the United States. We examined the microbially mediated degradation of AMD and diversity of AMD-degrading microbial physiotypes in the Rocky Ford Highline Canal, Colorado to better constrain the potential fate ofAMD in a canal environment. Microorganisms able to use AMD (500 mg L(-1)) as a sole nitrogen source were relatively abundant (2.3 x 10(3) to 9.4 x 10(3) cells mL(-1) in water and 4.2 x 10(3) to 2.3 x 10(5) cells g(-1) in sediment). Only sediment samples contained microorganisms able to use AMD as a sole carbon source. Acrylamide (up to 100 mg L(-1)) was efficiently removed from amended canal water and sediment slurries under aerobic conditions, but no AMD degradation was observed in abiotic controls. Anaerobic degradation of AMD by nitrate-, sulfate-, and iron-reducing microorganisms was also tested, with nitrate reducers affecting the highest amounts of AMD removal (70.3-85%) after 60 d. All representatives (n=15) from a collection of 256 AMD-degrading microbial isolates from Rocky Ford Highline Canal were closely related to well characterized environmental bacteria capable of facultative nitrate respiration. Our results demonstrate that natural microbial populations within this canal are capable of AMD degradation under aerobic and anaerobic conditions and that this degradation is performed by naturally abundant bacteria likely to be present in other freshwater irrigation canals or similar lotic habitats.     

Trace metal uptake by tropical vegetables grown on soil amended with urban sewage sludge

Trace metal uptake was measured for tropical and temperate leafy vegetables grown on soil from an urban sewage disposal farm in the UK. Twenty-four leafy vegetables from East Africa and the UK were assessed and the five vegetable types that showed the greatest Cd concentrations were grown on eight soils differing in the severity of contamination, pH and other physico-chemical properties. The range of Cd concentrations in the edible shoots was greater for tropical vegetables than for temperate types. Metal uptake was modelled as a function of (i) total soil metal concentration, (ii) CaCl₂-soluble metal, (iii) soil solution concentration and (iv) the activity of metal ions in soil pore water. Tropical vegetables were not satisfactorily modelled as a single generic ‘green vegetable’, suggesting that more sophisticated approaches to risk assessment may be required to assess hazard from peri-urban agriculture in developing countries.     

Characteristics of the event mean concentration (EMC) from rainfall runoff on an urban highway

The purpose of this study was to investigate the characterization of the event mean concentration (EMC) of runoff during heavy precipitation events on highways. Highway runoff quality data were collected from the 7th highway, in South Korea during 2007-2009. The samples were analyzed for runoff quantity and quality parameters such as COD_cr, TSS, TPHs, TKN, NO₃, TP, PO₄ and six heavy metals, e.g., As, Cu, Cd, Ni, Pb and Zn. Analysis of resulting hydrographs and pollutant graphs indicates that the peak of the pollutant concentrations in runoff occurs 20 min after the first rainfall runoff occurrence. The first flush effect depends on the preceding dry period and the rainfall intensity. The results of this study can be used as a reference for water quality management of urban highways.