蒙特卡洛分析在氯气泄漏事故环境风险评价中的应用研究

气体泄漏事故环境风险系统中存在的不确定性问题影响了定量环境风险评价结果的科学性和实用性.因此,本研究采用蒙特卡洛分析方法对氯气泄漏事故风险系统中的6个风险变量进行分析,并进一步对气体泄漏过程进行仿真模拟,得到模拟结果及其概率分布.同时,将蒙特卡洛分析结果、毒性剂量反应指标和风险受体信息在地理信息系统中进行综合分析,以个...     

闽江下游突发性水污染事故时空模拟

以闽江下游为例,基于有限元法建立闽江下游水动力模型及水质模型,通过对模型进行率定和验证,表明该模型具有较理想的模拟效果.在此基础上,利用闽江下游2004年的水文情况,模拟了突发性水污染事故中污染物的运移扩散过程.定量模拟了突发性水污染事故发生后,闽江下游不同地点处污染物到达的时间和浓度值,并对突发风险事故的影响范围、程...     

促进江湖联系的闸口调度对策及影响区管理机制

我国传统的修堤建闸、抵御洪水的治河理念,阻断了江湖联系,造成湿地的生态萎缩。为改善湿地的生态环境,保护湿地的生物多样性,提出了新的多目标闸口调度机制,替代传统的、以防洪抗旱为目的的调度机制,力求促进江湖联系,增加湿地活力;为保障该机制的运行和实施,提出了闸口调度影响区的管理办法;并以涨渡湖为例进行了讨论。     

基于我国规范与PIARC标准的公路隧道需风量分析

以某长大高速公路隧道为例,结合我国隧道通风设计规范JTJ026.1-1999与PIARC2007标准(世界道路协会),针对不同行车速度,不同车辆更新情况、不同排放标准组合形式以及是否考虑NOx等情况,对各个不同工况的需风量分别进行计算,并从需风量计算方法、机动车排放量和污染物设计浓度三个方面对隧道需风量差异进行分析。研究结果表明:我国设计规范与PIARC2007存在较大差距,为了适应当前及今后我国交通量及机动车排放特点的发展趋势,我国现行规范应在机动车排放量、污染物设计浓度限值等方面做出必要改进以达到合理确定隧道需风量的目的。     

无机-有机复合絮凝剂PST处理印染废水效果研究

以模拟印染废水和实际印染废水为实验对象,检验了一种新合成有机-无机复合絮凝剂(PST)的絮凝效果。结果表明,PST具有良好的絮凝性能。在受试条件下,絮凝效果与絮凝剂投加量、染料浓度有较大相关性。废水的pH值应用范围较宽;搅拌时间对COD去除率和脱色率没有显著影响。采用PST处理广东省高明市某印染厂的印染废水后,COD去除率为75.16%,脱色率为76.18%,处理效果良好,处理成本明显低于目前市场上普遍使用的聚铝等絮凝剂。     

Effect of C/N ratio, aeration rate and moisture content on ammonia and greenhouse gas emission during the composting

Gaseous emission (N₂O, CH₄ and NH₃) from composting can be an important source of anthropogenic greenhouse gas and air pollution. A laboratory scale orthogonal experiment was conducted to estimate the effects of C/N ratio, aeration rate and initial moisture content on gaseous emission during the composting of pig faeces from Chinese Ganqinfen system. The results showed that about 23.9% to 45.6% of total organic carbon (TOC) was lost in the form of CO₂ and 0.8% to 7.5% of TOC emitted as CH₄. Most of the nitrogen was lost in the form of NH₃, which account for 9.6% to 32.4% of initial nitrogen. N₂O was also an important way of nitrogen losses and 1.5% to 7.3% of initial total nitrogen was lost as it. Statistic analysis showed that the aeration rate is the most important factor which could affect the NH₃ (p = 0.0189), CH₄ (p = 0.0113) and N₂O (p = 0.0493) emissions significantly. Higher aeration rates reduce the CH₄ emission but increase the NH₃ and N₂O losses. C/N ratio could affect the NH₃ (p = 0.0442) and CH₄ (p = 0.0246) emissions significantly, but not the N₂O. Lower C/N ratio caused higher NH₃ and CH₄ emissions. The initial moisture content can not influence the gaseous emission significantly. Most treatments were matured after 37 days, except a trial with high moisture content and a low C/N ratio.     

Complete catalytic oxidation of o-xylene over Ce02 nanocubes

The activities of CeO2 nanocubes calcined at different temperatures were tested for catalytic oxidation of o-xylene. Using CeO2 nanocubes as catalysts, complete catalytic oxidation of o-xylene was achieved below 210℃. The CeO2 nanomaterials were characterized by means of BET, X-ray diffraction (XRD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). From the TEM images, all Ce02 nanocubes displayed cubic morphology irrespective of calcination temperature. The HRTEM images revealed that these nanocubes were enclosed by reactive {001}planes, which may contribute to the intrinsically catalytic property of o-xylene oxidation. The higher activity of Ce02 nanocubes calcined at 550℃ than those calcined at above 550℃ was attributed to their smaller crystallite size and larger surface area. The influences of reaction conditions were also studied, which found that a higher reaction temperature was necessary for complete catalytic oxidation of o-xylene at higher weight hourly space velocity (WHSV) and o-xylene concentration.     

Preparation and microwave absorbing properties of the core-nanoshell composite absorbers with the magnetic fly-ash hollow cenosphere as core

Electromagnetic (EM) wave pollution has become the chief physical pollution for environment. The core-nanoshell composite absorbers with magnetic fly-ash hollow cenosphere as core and nanocrystalline magnetic material as shell were prepared by high-energy ball milling. The results of X-ray diffraction analysis (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and vector network analyzer (VNA) analysis indicated that perfect-crystalline nanomagnetic material coating was gotten with a particle size of 12 nm, being dried at 60°C for 2 hr and calcined at 400°C for 1 hr after ball milling. The exchange-coupling interaction happened between ferrite of cenosphere and soft magnet γ-Fe₂03 coating, it enhances magnetic loss of composite absorbers. In the frequency between 1 MHz and 1 GHz, the absorbing effectiveness of the core-nanoshell composite absorbers can achieve ?30 dB, it is better than single material and is consistent with requirements of the microwave absorbing material at the low-frequency absorption.     

CTMAB增强调控沉积物(生物膜)吸附BPA的作用

研究了经十二烷基苯磺酸钠(SDBS]、曲拉通(TX-100)和十六烷基三甲基溴化铵(CTMAB)改性前后的沉积物(生物膜)吸附双酚A(BPA)的能力,并分析了CTMAB在沉积物(生物膜)吸附BPA过程中的增强机理及表面吸附和分配作用在总吸附中的贡献.研究结果表明,三种表面活性剂对沉积物(生物膜)吸附BPA的促进作用大小...     

电镀行业清洁生产指标体系的修正

文章旨在通过剖析清洁生产指标体系建立的全过程,发现《电镀行业清洁生产指标体系(试行)》存在的缺陷与不足,并进行修正,采用层次分析法对修正后的定量指标体系赋权.最后选用三家电镀企业,对修正前后的指标体系进行评价与对比,并据此证明:修正后的指标体系更能客观评价企业真实的清洁生产水平.