电磁兼容比对试验的实施与分析

本次比对试验在A、B两家国军标电磁兼容检测实验室中进行。比对的项目为国军标GJB151B中的CE101(25Hz~10kHz电源线传导发射)测试项、RE102(10kHz~1GHz电场辐射发射)。验证测试设备、测试场地、测试方法等对测试结果的影响。将双方实验室的比对数据进行分析,研究A实验室与B实验室测试结果存在差异的原因,并给出改进措施。     

医用治疗仪EMC测试问题探析及总结

通过对医用治疗仪进行分类,针对低压输出和高压输出两类产品的EMC常见不合格项目,挑选典型的产品加以分析,从而总结出不合格项目对应的改善措施,为治疗仪产品的EMC问题提供案例参考。     

Chemical additives affect sulfate reducing bacteria biofilm properties adsorbed on stainless steel 316L surface in circulating cooling water system

This paper studied the biofilm properties and corrosion behavior of sulfate reducing bacteria (SRB) on stainless steel 316L (SS316L) surface in circulating cooling water system with and without additives including hydroxy ethyl fork phosphonic acid (HEDP), dodecyl dimethyl benzyl ammonium chlotide (1227) and NaClO. Biochemical technique, electrochemical technology, X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM) were used. The results show that the extracellular polymeric substance (EPS) in biofilm attached on the SS316L surface mainly contain proteins and polysaccharides, the contents are 98 ug·cm^-2 and 635ug·cm^-2, respectively. The polysaccharides were cut by 1227 about 80%, while 55% by NaClO. The proteins were reduced by NaClO about 53%, while only 30% by 1227. The potentiodynamic polarization shows that the corrosion potential of SS316L was enhanced from -0.495 V to -0.390 V by the chemical additives, delaying the occurrence of the corrosion. And the corrosion rate was also reduced from 5.19 × 10^-3 mm·a^-1 to 2.42 × 10^-3 mm·a^-1. But NaClO still caused pitting corrosion after sterilizing the bacteria, while 1227 can form a protective film on the surface of SS316L. Though HEDP contribute to the bacteria activity, it can enhance the breakdown potential. XPS results confirmed that 1227 can change the value of C:O in the biofilm attached on metal surface, and NaClO can eliminate the existence of amidogen. This study would provide some recommendations for the selection of chemical additives in the thermal power plant.

Open image in new window

     

Impairments of cadmium on vitellogenin accumulation in the hepatopancreas of freshwater crab <Emphasis Type="Italic">Sinopotamon henanense</Emphasis>

During ovary maturation of crabs, vitellogenin (Vg), a precursor molecule of vitellin (Vn) needed for embryogenesis, can be produced in large quantities in the hepatopancreas and then transported to the ovary by the hemolymph. In the present study, effects of Cd on Vg accumulation in the hepatopancreas and Vg transportation of the freshwater crab Sinopotamon henanense were investigated. We also studied the impacts of Cd on the mRNA expression of genes involved in energy metabolism, protein metabolism, and metallothionein (MT) and glutathione (GSH) synthesis. After Cd treatment, the Vg concentration and the Vg mRNA expression in the hepatopancreas were downregulated. Pearson’s correlation coefficient showed that the Vg level in the hepatopancreas correlated positively with those of the ovary and hemolymph (correlation coefficients 0.844 and 0.749, respectively), suggesting that the Vg transport from the hepatopancreas to the ovary can be impaired by Cd. The levels of carbohydrate and protein in the hepatopancreas of Cd-exposed crabs were decreased, and an inhibited protein metabolism was also observed. Energy production related isocitrate dehydrogenase and cytochrome C oxidase mRNA expressions, and MT and GSH synthesis increased after 10 days of Cd treatment and decreased after 20 days. Cd also caused a time-dependent upregulation of malondialdehyde. Our findings showed that Cd decreased Vg accumulation in the hepatopancreas due to partially excessive energy consumption and an activated defense system in the hepatopancreas, suggesting a possible regulatory mechanism in S. henanense which is the competitive advantage of energy reserves in metabolic Cd stress responses over the high-energy flux during vitellogenesis to ensure a continuous supply of metabolic energy. Moreover, the damage of Vg accumulation in the hepatopancreas caused by Cd could lead to an insufficient accumulation of Vn in the ovary and cause a retardation of oocyte development.     

Elemental mobility in sulfidic mine tailings reclaimed with paper mill by-products as sealing materials

Environmental Science and Pollution Research - Sealing layers made of two alkaline paper mill by-products, fly ash and green liquor dregs, were placed on top of 50-year-old sulfide-containing...     

Microbial community composition and electricity generation in cattle manure slurry treatment using microbial fuel cells: effects of inoculum addition

Environmental Science and Pollution Research - Microbial fuel cell (MFC) is a sustainable technology to treat cattle manure slurry (CMS) for converting chemical energy to bioelectricity. In this...     

Coupled Monte Carlo simulation and Copula theory for uncertainty analysis of multiphase flow simulation models

Environmental Science and Pollution Research - Simulation-optimization techniques are effective in identifying an optimal remediation strategy. Simulation models with uncertainty, primarily in the...     

Validation of temporal and spatial consistency of facility- and speed-specific vehicle-specific power distributions for emission estimation: A case study in Beijing,China

Vehicle-specific power (VSP) has been found to be highly correlated with vehicle emissions. It is used in many studies on emission modeling such as the MOVES (Motor Vehicle Emissions Simulator) model. The existing studies develop specific VSP distributions (or OpMode distribution in MOVES) for different road types and various average speeds to represent the vehicle operating modes on road. However, it is still not clear if the facility- and speed-specific VSP distributions are consistent temporally and spatially. For instance, is it necessary to update periodically the database of the VSP distributions in the emission model? Are the VSP distributions developed in the city central business district (CBD) area applicable to its suburb area? In this context, this study examined the temporal and spatial consistency of the facility- and speed-specific VSP distributions in Beijing. The VSP distributions in different years and in different areas are developed, based on real-world vehicle activity data. The root mean square error (RMSE) is employed to quantify the difference between the VSP distributions. The maximum differences of the VSP distributions between different years and between different areas are approximately 20% of that between different road types. The analysis of the carbon dioxide (CO₂) emission factor indicates that the temporal and spatial differences of the VSP distributions have no significant impact on vehicle emission estimation, with relative error of less than 3%.

Implications: The temporal and spatial differences have no significant impact on the development of the facility- and speed-specific VSP distributions for the vehicle emission estimation. The database of the specific VSP distributions in the VSP-based emission models can maintain in terms of time. Thus, it is unnecessary to update the database regularly, and it is reliable to use the history vehicle activity data to forecast the emissions in the future. In one city, the areas with less data can still develop accurate VSP distributions based on better data from other areas.     

Atrazine contamination in agricultural soils from the Yangtze River Delta of China and associated health risks

Atrazine is one of the most widely applied and persistent herbicides in the world. In view of limited information on the regional contamination of atrazine in soils in China, this study investigated the spatial distribution and environmental impacts of atrazine in agricultural soils collected from the Yangtze River Delta (YRD) as an illustrative analysis of rapidly developing regions in the country. The results showed that the concentrations of atrazine in the YRD agricultural soils ranged from <1.0 to 113 ng/g dry weight, with a mean of 5.7 ng/g, and a detection rate of 57.7 % in soils. Pesticide factory might be a major source for the elevated levels of atrazine in Zhejiang Province. The contamination of atrazine was closely associated with land use types. The concentrations and detection rates of atrazine were higher in corn fields and mulberry fields than in rice paddy fields. There was no significant difference in compositions of soil microbial phospholipids fatty acids among the areas with different atrazine levels. Positive relationship (R = 0.417, p < 0.05, n = 30) was observed between atrazine and total microbial biomass. However, other factors, such as soil type and land management practice, might have stronger influences on soil microbial communities. Human health risks via exposure to atrazine in soils were estimated according to the methods recommended by the US EPA. Atrazine by itself in all the soil samples imposed very low carcinogenic risks (<10^?6) and minimal non-cancer risks (hazard index <1) to adults and children.     

Characterization of hard- and softwood biochars pyrolyzed at high temperature

A wide range of waste biomass/waste wood feedstocks abundantly available at mine sites provide the opportunity to produce biochars for cost-effective improvement of mine tailings and contaminated land at metal mines. In the present study, soft- and hardwood biochars derived from pine and jarrah woods at high temperature (700 °C) were characterized for their physiochemical properties including chemical components, electrical conductivity, pH, zeta potential, cation-exchange capacity (CEC), alkalinity, BET surface area and surface morphology. Evaluating and comparing these characteristics with available data from the literature have affirmed the strong dictation of precursor type on the physiochemical properties of the biochars. The pine and jarrah wood feedstocks are mainly different in their proportions of cellulose, hemicellulose and lignin, resulting in biochars with heterogeneous physiochemical properties. The hardwood jarrah biochar exhibits much higher microporosity, alkalinity and electrostatic capacity than the softwood pine. Correlation analysis and principal component analysis also show a good correlation between CEC–BET–alkalinity, and alkalinity–ash content. These comprehensive characterization and analysis results on biochars’ properties from feedstocks of hardwood (from forest land clearance at mine construction) and waste pine wood (from mining operations) will provide a good guide for tailoring biochar functionalities for remediating metal mine tailings. The relatively inert high-temperature biochars can be stored for a long term at mine closure after decades of operations.