Estimating Air Quality in a Traffic Tunnel Using a Forecasting Combination Model

This study performs a field analysis of the diffusion collection rate coefficients of radial geometry passive samplers to measure NO₂ in a Mediterranean coastal area. The study shows that the collection rate coefficients are not constant and depend on certain environmental parameters as well as on the levels of some co-pollutants. A mathematical model, which explains the variation of the collection rate coefficient, has been established.     

长江源区草地植被退化对土壤持水能力影响

选择长江源区的格尔木市唐古拉山镇作为研究区,通过野外实地采样与室内测试分析相结合,在分析草地植被不同退化阶段和不同土层深度下土壤持水能力特征的基础上,探讨了草地植被退化对土壤持水能力影响。结果表明：（1）在相同草地植被退化阶段,毛管持水量、饱和含水量和田间持水量随土层深度变化的特征基本一致;在相同土层深度上,毛管持水量、饱和含水量和田间持水量随草地植被退化的特征也大体相同。（2）在相同草地植被退化阶段,土壤持水量总体上随土层深度增加而减少,特别是在未退化阶段,10~20 cm土层的毛管持水量、饱和含水量和田间持水量比0~10 cm土层分别减少了12.38%、33.73%和7.64%。（3）在相同土层深度上,土壤持水量总体上随草地植被退化而减少,特别是在0~10 cm土层,轻度退化阶段的毛管持水量、饱和含水量和田间持水量比未退化阶段分别减少了41.52%、59.95%和27.03%。（4）土壤持水量与土壤容重、总碳、有机质和总氮显著相关,它在草地植被不同退化阶段和不同土层深度下的变化可能与地表覆被状况、植物根系数量和分布特征所引起的土壤容重、有机质等变化有关。研究可深化对草地植被退化与土壤持水能力相互关系的理解和认识,并为长江源区生态环境和水资源状况研究提供参考依据。 关键词： 土壤持水能力;草地植被退化;长江源区;影响     

Concentration and composition variations of metals in the outdoor PM10 of elementary schools during river dust episodes

Aeolian river dust can seriously affect the air quality in central Taiwan. The main purpose of this study was to assess the concentration variations of PM₁₀ and metals at different elementary schools during river dust episodes. River dust samples were taken from eight sites in the main bare soil areas of the Choshui River. PM₁₀ aerosols from four elementary schools in Yulin County were collected by means of high-volume samplers. Fifteen elements (Fe, Al, Ca, Mg, Mn, Zn, Ti, Ni, V, Cr, As, Pb, Cu, Co, and Cd) in the river dust and PM₁₀ were analyzed in this study. The coefficients of divergence (CDs) were obtained by comparing the metal compositions in PM₁₀ aerosols at the four schools on the sampling days with the mean metal contents in the river soil samples as reference. The CD values showed that metal compositions in the aerosols at high-exposure sites during river dust episodes were similar to those compositions in the river dust. The concentrations of PM₁₀ at the high-exposure schools during river dust episodes were much higher than those during non-river-dust episodes. This study also indicated that at the high-exposure sites, both the PM₁₀ and metal concentrations were higher than at the low-exposure and control sites, not only during the river dust episodes, but also after the river dust episodes. The concentrations of toxic metals (Ni, Cr, As, and Cd) at the high-exposure sites were about 11.3 times higher during the river dust episodes (189 ng/m³) than during non-river-dust episodes (16.7 ng/m³) and about 8.9 times higher during the same periods at the control site (21.3 ng/m³).     

Photocatalytic oxidation of xenobiotics in water with immobilized TIO2 on agitator

Abstract

A novel photocatalytic oxidation reactor, using Degussa P‐25 T_iO₂ as a stationary phase with a thickness of 1.5–2.0 um on the blades of agitator, was developed to study the photocatalytic oxidation of xenobiotics. Particularly in this device, separation of photocatalyst from the purified water after oxidation reaction was not necessary, and no other aeration equipment was required to supply oxygen. To examine the efficiency of this device, photocatalytic degradation of xenobiotic organics such as carbofuran was studied as an example. Results indicated that carbofuran could be degraded completely with mineralization efficiency of 20 % after 6 hours of oxidation under the imposed conditions. The mineralization rate of carbofuran was found to follow the pseudo‐first order reaction kinetics. Moreover, the rate constant of mineralization was found to be proportional to T_iO₂ film area and the square root of UV light intensity. These results implied the mineralization efficiency of carbofuran could be improved through increasing T_iO₂ film area and UV light intensity. Accordingly, this novel device showed potential application for degrading xenobiotics in water.     

Modified grey model for estimating traffic tunnel air quality

This study compared three forecasting models based on the mean absolute percentage errors (MAPE) of their accuracy in forecasting air pollution in a traffic tunnel: the Grey model (GM), the combination model used four sample point and five sample point prediction with GM (1,1)(GM(1,1)^4 + 5), and the modified grey model (MGM). An MGM was combined using the four points of the original sequence using the original grey prediction GM (1,1) for short-term forecasting. The proposed method cannot only enhance the prediction accuracy of the original grey model, but can also solve the jump data forecasting problem something for which the original grey model is inappropriate. The MAPE was applied to the models, and the MGM found the proposed method to be simple and efficient. The MAPE of MGM, calculated over 3 h of forecasts, were as follows: 10.12 (Upwind), 10.07 (Middle) and 7.68 (Downwind) for CO; 10.79 (Upwind), 6.05 (Middle) and 5.98 (Downwind) for NO _x , and 11.67 (Upwind), 7.32 (Middle) and 4.56 (Downwind) for NMHC. The MGM model results reveal that the combined forecasts can significantly decrease the overall forecasting error. Results of this demonstrate that MGM can accurately forecast air pollution in the Kaohsiung Chung–Cheng Tunnel.     

Occurrence of perfluorinated compounds in the aquatic environment as found in science park effluent,river water,rainwater, sediments,and biotissues

The current article maps perfluoroalkyl acids (PFAAs) contamination in the largest Science Park of Taiwan. The occurrence of ten target PFAAs in the effluent of an industrial wastewater treatment plant (IWWTP), its receiving rivers, rainwater, sediment, and the muscles and livers of fish was investigated. All target PFAAs were found in effluent of IWWTP, in which perfluorooctane sulfonate (PFOS) (6,930 ng/L), perfluorohexyl sulfonate (PFHxS) (2,662 ng/L) and perfluorooctanoic acid (PFOA) (3,298 ng/L) were the major constituents. Concentrations of PFBS and PFOS in the IWWTP downstream areas have exceeded safe concentration levels of avian and aquatic life, indicating a potential risk to wildlife in those areas. In sediment samples, predominant contaminants were PFOS (1.5–78 ng/g), PFOA (0.5–5.6 ng/g), and perfluorododecanoic acid (PFDoA) (nd–5.4 ng/g). In biological tissue samples, concentrations as high as 28,933 ng/g of PFOS were detected in tilapia and catfish liver samples. A positive correlation for log (C _sediment/C _water) and log (C _tissue/C _water) was found. The concentration and proportion (percentage of all PFAAs) of PFOS found in biotissue samples from the Keya River (which receives industrial wastewater) were found to be much greater (200 times) than those of samples from the Keelung River (which receives mainly domestic wastewater). These findings suggest that the receiving aquatic environments and, in turn, the human food chain can be significantly influenced by industrial discharges.     

Removal of pesticides from rinsate by adsorption using agricultural residuals as medium

Abstract

The feasibility of using agricultural residual with highly organic matter content ‐ spent mushroom compost (SMC) as adsorption medium for removal of pesticides including carbaryl, carbofuran, and aldicarb with a concentration range of 0–30 mg/L from rinsate was investigated. Bottle‐point method was used to determine adsorption isotherms for single‐pesticide and multi‐pesticides. It was found that SMC might potentially be used for on‐farm treatment of pesticide rinsate. The adsorption capacity of SMC was increased compared to most soils, possibly related to the increased organic matter content. The rapid equilibrium of pesticide solution and SMC was consistent with a physical type of adsorption mechanism. The adsorption of carbamate pesticides on SMC was found to exhibit nonlinear “favorable”; adsorption behavior that could be characterized well by the Freundlich isotherm model. In addition, the multi‐pesticide adsorption tests displayed the characteristics of competitive behavior. The competitive ability of these three pesticides in multi‐components adsorption was in the order carbaryl > carbofuran > aldicarb, which was consistent with the adsorbability of pesticides.     

Effect of Biaxial Stretching on Thermal Properties, Shrinkage and Mechanical Properties of Poly (Lactic Acid) Films

This study produced poly (lactic acid) sheets using a biaxial stretching process, to investigate the effects of biaxial stretching on thermal properties, crystallinity, shrinkage and mechanical properties of PLA films. The results of differential scanning calorimetry show that the glass temperature peak of PLA films, which weakened after stretching. The cold crystallization peak of PLA films nearly disappeared at stretch ratios of 4 × 4 with a stretching rate above 50 %/s. The orientation and strain crystallization of PLA films were suppressed at stretching temperatures of approximately 100–110 °C. The shrinkage of PLA decreased proportionally to the stretch rate and inversely proportional to the stretching temperature, suggesting that the internal stresses frozen in the amorphous phase were an indication of a decrease in the crystallinity of the films, implying that PLA films would be best suited to low-shrinkage applications. The stress–strain of the PLA films increased considerably following the biaxial stretching process. In addition, PLA films exposed to hot water treatment show a slight decrease in stress values, probably attributable to a relaxation of the molecules, which have undergone orientation but failed to crystallize.     

A pilot study for determining the optimal operation condition for simultaneously controlling the emissions of PCDD/Fs and PAHs from the iron ore sintering process

In this study, the cost-benefit analysis technique was developed and incorporated into the Taguchi experimental design to determine the optimal operation combination for the purpose of providing a technique solution for controlling both emissions of PCDD/Fs and PAHs, and increasing both the sinter productivity (SP) and sinter strength (SS) simultaneously. Four operating parameters, including the water content, suction pressure, bed height, and type of hearth layer, were selected and all experimental campaigns were conducted on a pilot-scale sinter pot to simulate various sintering operating conditions of a real-scale sinter plant. The resultant optimal combination could reduce the total carcinogenic emissions arising from both emissions of PCDD/Fs and PAHs by 49.8%, and increase the sinter benefit associated with the increase in both SP and SS by 10.1%, as in comparison with the operation condition currently used in the real plant. The ANOVA results indicate that the suction pressure was the most dominant parameter in determining the optimal operation combination. The above result was theoretically plausible since the higher suction pressure provided more oxygen contents leading to the decrease in both PCDD/F and PAH emissions. But it should be noted that the results obtained from the present study were based on pilot scale experiments, conducting confirmation tests in a real scale plant are still necessary in the future.     

Lake eutrophication management modeling using dynamic programming

Lake eutrophication problems have received considerable attention in Taiwan, especially because they relate to the quality of drinking water. In this study, steady-state river water quality and lake eutrophication models are solved using dynamic programming algorithms to find the nutrient removal rates for eutrophication control during dry season. The kinetic cycle of chlorophyll-a, phosphorus and nitrogen for a complete-mixed lake is considered in the optimization framework. The Newton-iterative technique is adopted to solve the nonlinear equations for the steady-state lake eutrophication model. The optimization framework is applied to Cheng-Ching Lake in southern Taiwan. Several nutrient loading scenarios for eutrophication control are studied. Optimization results for nutrient removal rates and corresponding wastewater treatment capacities of each reach of the Kao-Ping River define the least cost approach to lake eutrophication control. A natural purification method, structural free water surface wetland, is also suggested to save more investment and improve river water quality at the same time.