Fine particulate phase PAHs in ambient atmosphere of Chennai metropolitan city,India

Background  

Airborne fine particulates (PM 2.5) and its associated polycyclic aromatic hydrocarbons (PAHs) are reportedly hazardous in urban environment due to the presence of multiple emission sources.     

Genetic ecotoxicology of asbestos pollution in the house mouse <Emphasis Type="Italic">Mus musculus domesticus</Emphasis>

Purpose  

We tested the genetic diversity in wild mice (Mus musculus domesticus) inhabiting the asbestos-polluted area as a model for the long-term mutagenic effect of asbestos. Hazardous effects of deposited asbestos persist in the environment because of low rate of fiber disintegration. The upper layers of the soil in the vicinity of a former asbestos factory are nearly “saturated” with asbestos fibers and dust. Natural populations of mice dwell in this area and are constantly exposed to asbestos fibers.     

Occurrence of perfluorinated organic acids in the North and Baltic seas. Part 1: distribution in sea water

Purpose  

Due to their high water solubilities and mobilities, persistent, polar perfluorinated compounds (PFCs) such as perfluorinated carboxylates and sulfonates are likely to end up in the oceans. In part 1 of this study, their distribution in North and Baltic Sea water is reported, being of special interest because these seas are surrounded by highly industrialized countries with high population densities.     

Nationwide monitoring of atmospheric PCDD/Fs and dioxin-like PCBs in South Korea

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) were measured in ambient air samples collected from different parts of South Korea in 2008, and the measured levels were used for assessing the spatial and temporal distribution of atmospheric PCDDFs and DL-PCBs in South Korea. The average concentrations of atmospheric PCDD/Fs and DL-PCBs among the 37 sites were 28 fg I-TEQ m⁻³ (ND ∼ 617) and 1 fg WHO-TEQ m⁻³ (ND ∼ 0.016). Elevated atmospheric levels of PCDD/Fs and DL-PCBs observed at residential/industrial sites and in the north-west of Korea, indicated a potential contribution and impacts of anthropogenic sources of PCDD/Fs and DL-PCBs. These levels were similar or lower than those previously reported in other ambient air surveys. Average concentrations of PCDD/Fs showed small seasonal variations (ANOVA analysis, p = 0.144). The highest concentrations of PCDD/Fs were observed during winter, followed by spring, autumn and summer. Atmospheric PCDD/Fs and DL-PCBs in South Korea rapidly decreased during the last 10 years (1998-2008), demonstrating the efficiency of stricter regulations and the application of best available technologies/best environmental practices at emission sources. Comparison of the congener profiles and principal component analysis showed that current atmospheric PCDD/Fs are mostly influenced by industrial sources and PCBs from old commercial PCB uses. Nationwide POPs monitoring will continue and allows an effective evaluation of the implementation of the Stockholm Convention on POPs.     

Modifications of black carbons and their influence on pyrene sorption

Sorption of pyrene on black carbons (BCs) obtained by heating sawdust at two temperatures (400 and 700 °C, denoted as 400BC and 700BC, respectively), as well as on modified BCs (via oxidation, oximation, and hydrolysis) was studied to investigate the role of BC structural characteristics in sorption of hydrophobic organic compounds. Pyrene was bound strongly by 700BC and 400BC, with organic carbon normalized distribution coefficients (K_oc) of 10^5.04-10^5.86 and 10^4.65-10^5.16, respectively, at equilibrium pyrene concentrations of 10-100 μg L⁻¹. Both chemical composition and pore distribution of the two BCs changed after modifications, which led to changes in their sorption characteristics for pyrene. After modifications, the linearity of pyrene sorption isotherm increased for 700BC but decreased for 400BC. For 700BC, both oxidation and oximation reduced pyrene sorption, with K_oc decreasing by 69.1-73.7% and 18.7-33.9%, respectively, whereas hydrolysis did not exert a significant influence. For 400BC, oxidation and hydrolysis reduced K_oc by 2.28-25.9% and 29.2-33.9%, respectively, while oximation increased K_oc. In most cases, the change in sorption capacity could be explained by the changes in C content and type, polarity, surface area, and micropore volume of the BCs; however, the role of conformation (the accessibility to sorption sites) could not be ignored.     

Biotoxicity of nickel oxide nanoparticles and bio-remediation by microalgae Chlorella vulgaris

Adverse effects of manufactured nickel oxide nanoparticles on the microalgae Chlorellavulgaris were determined by algal growth-inhibition test and morphological observation via transmission electron microscopy (TEM). Results showed that the NiO nanoparticles had severe impacts on the algae, with 72 h EC(50) values of 32.28 mg NiOL(-1). Under the stress of NiO nanoparticles, C. vulgaris cells showed plasmolysis, cytomembrane breakage and thylakoids disorder. NiO nanoparticles aggregated and deposited in algal culture media. The presence of algal cells accelerated aggregation of nanoparticles. Moreover, about 0.14% ionic Ni was released when NiO NPs were added into seawater. The attachment of aggregates to algal cell surface and the presence of released ionic Ni were likely responsible for the toxic effects. Interestingly, some NiO nanoparticles were reduced to zero valence nickel as determined by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis. The maximum ratios of nickel reduction was achieved at 72 h of exposure, in accordance with the time-course of changes in soluble protein content of treated C. vulgaris, implying that some proteins of algae are involved in the process. Our results indicate that the toxicity and bioavailability of NiO nanoparticles to marine algae are reduced by aggregation and reduction of NiO. Thus, marine algae have the potential for usage in nano-pollution bio-remediation in aquatic system.     

Use of reporter-gene based bacteria to quantify phenanthrene biodegradation and toxicity in soil

A phenanthrene-degrading bacterium, Sphingomonas paucimobilis EPA505 was used to construct two fluorescence-based reporter strains. Strain D harboring gfp gene was constructed to generate green fluorescence when the strain started to biodegrade phenanthrene. Strain S possessing gef gene was designed to die once phenanthrene biodegradation was initiated and thus to lose green fluorescence when visualized by a live/dead cell staining. Confocal laser scanning microscopic observation followed by image analysis demonstrates that the fluorescence intensity generated by strain D increased and the intensity by strain S decreased linearly at the phenanthrene concentration of up to 200 mg/L. Such quantitative increase and decrease of fluorescence intensity in strain D (i.e., from 1 to 11.90 ± 0.72) and strain S (from 1 to 0.40 ± 0.07) were also evident in the presence of Ottawa sand spiked with the phenanthrene up to 1000 mg/kg. The potential use of the reporter strains in quantitatively determining biodegradable or toxic phenanthrene was discussed.     

净化SO2的生物膜填料塔中微生物类群分析

对净化废气中SO2的生物膜填料塔内的微生物进行了分离纯化并做鉴定,得到一株嗜酸性氧化硫硫杆菌（Acidithiobacillus thiooxidans IEL001）和一株分类地位非常接近链二孢属（Bispora sp.）的极端嗜酸真菌IEL002,生物膜填料塔内的极端酸性环境和有机营养的缺乏导致生物膜上的微生物种类较为单一,多样性程度不高。本研究还发现IEL002自身并不能氧化单质硫,但它能促进Acidithiobacillus thiooxidans IEL001对单质硫的氧化。     

低剂量臭氧的直接通加对活性污泥的活性、微生物种群及污泥减量化的影响

研究构建了2个容积为1.1 L的好氧活性污泥反应器（即1号和2号反应器）1,号反应器每天直接通加低剂量臭氧（投加量为0.01 g O3/g TSS）,不加臭氧的2号反应器作为对照平行运行,均采用每天换一次人工污水的充/排式操作。运行71 d的结果表明2,个反应器对人工污水COD的处理效果基本相同。反应器运行40 d后1,号反应器的污泥浓度比2号反应器的污泥浓度低1 400～1 700 mg/L并可稳定在8 200 mg/L,污泥减量化效果明显。低剂量臭氧的直接通加明显降低了胞内ATP浓度,并影响了微生物的抗氧化活性,2号反应器的平均超氧化物歧化酶和过氧化氢酶酶活比1号反应器分别高了24.3%和9.5%。PCR-DGGE对两反应器微生物种群的分析结果表明：Uncultured gammaproteobacteria bacteri-um、Nannocystis exedens和Uncultured actinobacterium为1号反应器的主要种群;而2号反应器的主要种群为Uncultured bacte-rium和Uncultured gammaproteobacteria bacterium。     

Variation of low molecular weight organic acids in precipitation and cloudwater at high elevation in South China

To investigate the sources and chemical behaviors of carboxylic acids in Southern China, precipitation and corresponding cloudwater samples were collected in an acid rain-prone area of Mount Heng. The carboxylic acid levels in the samples were measured, and the concentration patterns were evaluated with respect to temporal and seasonal variations. Formic and acetic acids were predominant among the carboxylic acids identified for both precipitation and cloudwater. Most of the organic acids in the precipitation had a clear seasonal pattern, reaching higher levels during the warm season; these higher levels were attributed to the stronger source strength of biogenic emissions during this season. The cloud–fog samples did not display a similar trend. A distinctive diurnal pattern in carboxylic acids was only observed in the precipitation samples during the warm season. In cloud–fog, the ratio of formic to acetic acid differed considerably with time, with these values varying little in the precipitation samples. This result indicates that the organic acids in precipitation originate consistently from primary sources throughout the entire period, while those in cloud are mainly associated with direct emissions in the earlier stage and with secondary sources in the later period.