海洋石油灾难不可忽视

<正>2010年4月20日22时(北京时间21日11时),位于美国路易斯安那州威尼斯东南约82公里海面处的深水地平线钻井平台发生爆炸,继而引发大火,大约36小时后钻井平台沉入墨西哥湾。深水地平线是世界上最先进的钻井平台之一,造价约6亿—7亿美元。该钻井平台是韩国现代重工业公司造船厂于2001年建成,由总     

用废变压器油吸收废气中的二甲苯

以废变压器油作为吸收剂对二甲苯废气进行吸收处理,考察了影响二甲苯气体去除率的因素。实验结果表明:二甲苯废气流量为350 L/h、废变压器油喷淋量为40 L/h、进口二甲苯废气平日质量浓度为935 mg/m~3、吸收温度为18℃、吸收时间为50 min时,出口二甲苯气体质量浓度为35 mg/m~3,二甲苯去除率高达96.3%,小于GB16297—1996《大气污染物综合排放标准》中二甲苯质量浓度90 mg/m~3的排放标准。     

化工园区空气中非甲烷总烃与挥发性有机物的定量关系

采用美国环保署(EPA)推荐的TO14/15方法和自动监测测定了某化工园区空气中挥发性有机物(VOC)以及非甲烷总烃,测定结果显示化工园区空气中非甲烷总烃与VOC的定量关系可以通过有效碳质量浓度建立,即非甲烷总烃有效碳质量浓度和VOC有效碳质量浓度之和相等。并藉此定义总有效碳解析度(R)以表征空气自动监测选定项目对空气有机污染的覆盖率指标,计算结果表明该空气自动监测选定的11项指标平均可表征该区域空气有机污染的71%。     

偕胺肟合铁(Ⅲ)纤维对α-萘酚的吸附

以腈纶纤维为原料络合Fe3+制得偕胺肟合铁(Ⅲ)纤维,用其处理α-萘酚溶液,研究了偕胺肟合铁(Ⅲ)纤维对α-萘酚的吸附工艺条件和吸附动力学参数。实验结果表明,偕胺肟合铁(Ⅲ)纤维对α-萘酚的最佳吸附工艺条件为pH=3.0、吸附温度313.15K和吸附时间45min。在最佳工艺条件下,偕胺肟合铁(Ⅲ)纤维对α-萘酚的吸附在所研究的α-萘酚浓度范围内符合Freundlich等温吸附方程。未达到饱和吸附前,偕胺肟合铁(Ⅲ)纤维对α-萘酚的吸附符合一级反应动力学特征。     

积极促进就业 巩固党群关系

中国共产党是中国工人阶级先锋队,同时也是中国人民和中华民族的先锋队.全心全意为人民谋利益是党的根本宗旨和行为准则.就业是民生之本,民富之源,民心所向,民意所在.因此,积极促进就业,是密切党和群众关系的基础,是进一步巩固党群关系的重要措施,是提高党执政能力的体现.     

Differences in Eye and Hand Movements of Novice and Experienced Press Operators

Presses are very widely used in industrial and commercial companies and are often the source of serious accidents occurring during operation. Most of the accidents are due to inadequate training of novice operators. Continuous recordings of eye and hand movements of five novice operators and five experienced operators in press operation were made. Significant difference between novice and experienced operators was observed in eye fixation time, eye movement patterns, hand dwell time, and eye-hand coordination. Also, differences were observed in spatial distribution of eye fixations during the die-closing portion of a stroke. There were no significant differences between novice and experienced operators in the eye and the hand movement time. The results could be used as basic data to establish a guide determining the method and training period to train novice operators.     

Analysis of underlying causes of investigated loss of containment incidents in Dutch Seveso plants using the Storybuilder method

In the Netherlands there are around 400 “Seveso” sites that fall under the Dutch Major Hazards Decree (BRZO) 1999. Between 2006 and 2010 the Dutch Labour Inspectorate's Directorate for Major Hazard Control completed investigations of 118 loss of containment incidents involving hazardous substances from this group. On the basis of investigation reports the incidents were entered in a tailor-made tool called Storybuilder developed for the Dutch Ministry of Social Affairs and Employment for identifying the dominant patterns of technical safety barrier failures, barrier task failures and underlying management causes associated with the resulting loss of control events. The model is a bow-tie structure with six lines of defence, three on either side of the central loss of containment event. In the first line of defence, failures in the safety barriers leading to loss of control events were primarily equipment condition failures, pre start-up and safeguarding failures and process deviations such as pressure and flow failures. These deviations, which should have been recovered while still within the safe envelope of operation, were missed primarily because of inadequate indication signals that the deviations have occurred. Through failures of subsequent lines of defence they are developing into serious incidents. Overall, task failures are principally failures to provide adequate technical safety barriers and failures to operate provided barriers appropriately. Underlying management delivery failures were mainly found in equipment specifications and provisions, procedures and competence. The competence delivery system is especially important for identifying equipment condition, equipment isolation for maintenance, pre-start-up status and process deviations. Human errors associated with operating barriers were identified in fifty per cent of cases, were mostly mistakes and feature primarily in failure to prevent deviations and subsequently recover them. Loss of control associated with loss of containment was primarily due to the containment being bypassed (72% of incidents) and less to material strength failures (28%). Transfer pipework, connections in process plant and relief valves are the most frequent release points and the dominant release material is extremely flammable. It is concluded that the analysis of a large number of incidents in Storybuilder can support the quantification of underlying causes and provide evidence of where the weak points exist in major hazard control in the prevention of major accidents.     

提高基层班组JSA质量的管理实践

工作安全分析(简称JSA)作为有效的危害识别和风险控制工具被广泛使用,但基层班组员工所做JSA的质量一直不高,具体表现为员工虽然清楚JSA的各个环节,却不能高质量的完成.尽管这在一定程度上与基层员工文化素质低,文字表达能力差有关,但也是管理者缺乏具体和优秀的指导所致.针对实施JSA的各个环节,分析制约质量提升的具体原因,以标准规范为基础提出具体可行的改进措施,实施效果良好.     

高可视性服装标准ISO 20471：2013简介及应对策略

高可视服装国际标准ISO 20471：2013正式生效,该标准规定了警示服的设计和材料的性能要求,以保证使用者在高风险环境中的日间夜间条件下的可视性。该标准相对于曾经执行的标准EN 471：2003＋A1：2007进行了多处修改和调整,了解这些标准中的变化对于出口欧盟等国家的成衣制造商应对服装的设计和材料的要求将有非常好的借鉴意义。