正渗透技术研究现状及进展

作为一种新型膜处理技术,正渗透技术自20世纪50年代建立以来,在环保、能源、海水淡化等领域受到越来越广泛的关注;其经历了从实验室研究,中试实验,到少量的商业化应用,技术日臻完善.本文综合了国内外相关文献的信息,从正渗透膜制备、浓差极化、汲取液及正渗透应用等四方面对正渗透技术的研究现状及进展进行了综述,并分析了其应用过程中存在的缺陷和未来发展趋势.正渗透技术的研发虽取得了显著进展,但仍存在应用瓶颈.正渗透膜仍存在对某些污染物的截留率不高、支撑层内浓差极化大、造价较贵等问题;影响浓差极化的因素尽管已经比较清楚,但至今尚无有效大幅度降低甚至消除内浓差极化的方法;汲取液存在反向渗透较重、回收过程能耗较大等问题;正渗透技术的应用范围,特别是在工业废水处理领域还需拓展.     

电除尘器气流分布数值计算方法研究

运用CFD方法对电除尘器内的气流流动进行数值计算,以相应的电除尘器气流分布模型试验为验证算例。数值计算采用多孔介质模型简化进口喇叭气流分布板,以第一电场进口断面的气流速度分布趋势及相对均方根值为评判标准,对比3种不同导流片布置方案的模型实测结果与数值计算结果。结果表明:各方案模拟结果与试验结果均吻合较好,最终布置方案的数值计算结果满足电除尘器设计要求。     

利用AERMOD预测焦化行业大气环境影响实例分析

随着焦化行业的快速发展,其环境污染问题也日益暴露出来,以大气污染最为严重。不同的焦化项目运行之后将会排放不同量的苯、CO、NH3、H2S、SO2和苯并芘等有毒有害气体,其排放量大小对项目所在地周围环境有着巨大影响,因此准确预测一个焦化项目对周围大气环境影响的程度,对决定此项目是否可行有着重大意义。以甘肃省某100万t焦化项目为例,在确定污染源的前提下,利用AERMOD模型,从气象数据及地形数据的获取方式、污染源选项、污染源设置、背景图、评价范围、网格点关心点的选取等方面详细介绍了利用AERMOD预测焦化行业大气环境影响的重点及技术要点,最后以SO2预测结果为例,分析了污染物对周围环境的影响程度,并简要介绍了影响污染物浓度分布的各个因素。希望为焦化行业大气环境影响预测以及AERMOD模型使用提供一定参考。     

河岸材料对河流有机污染物净化能力的影响

在河流水质号模型(RWQM1)的基础上,根据河岸材料影响河流对有机污染物净化能力的机理,建立了"简化河流水质1号模型"(S-RWQM1),并利用该模型模拟受河岸材料影响的生物化学反应过程,以及分析河岸材料及水体中微生物含量、代谢状况、有机污染物降解率与模型参数的相关性。对S-RWQM1的动力学参数进行灵敏度分析,发现对CODCr组分中易生物降解溶解性有机物Ss以及异养菌XH模拟计算结果影响较大的参数分别为异养菌好氧生长速率常数Kgro,H,aer,T0、异养菌好氧内源呼吸速率常数Kresp,H,aer,T0。相关性分析结果显示,以釉面瓷砖、透水砖、松木片为河岸材料的微生物脂磷含量、甲基萘醌与泛醌的摩尔比值MK/UQ、有机污染物降解率与模型参数中Kgro,H,aer,T0的相关系数分别为0.995、-0.904、0.988;格宾护岸的微生物脂磷含量、有机污染物降解率与Kgro,H,aer,T0的相关系数分别为0.862、0.990,与Kresp,H,aer,T0的相关系数分别为0.951、0.997。通过调整Kgro,H,aer,T0以及Kresp,H,aer,T0值,可提高CODCr模拟精度。结果表明,S-RWQM1可较好地反映河岸材料对水体中有机污染物净化能力的影响。     

Effect of carbon source and nitrate concentration on denitrifying phosphorus removal by DPB sludge

Effect of added carbon source and nitrate concentration on the denitrifying phosphorus removal by DPB sludge was systematically studied using batch experiments, at the same time the variation of ORP was investigated.Results showed that the denitrifying and phosphorus uptake rate in anoxic phase increased with the high initial anaerobic carbon source addition. However once the initial COD concentration reached a certain level, which was in excess to the PHB saturation of poly-P bacteria, residual COD carried over to anoxic phase inhibited the subsequent denitrifying phosphorus uptake. Simultaneously, phosphate uptake continued until all nitrate was removed, following a slow endogenous release of phosphate. High nitrate concentration in anoxic phase increased the initial denitrffying phosphorus rate. Once the nitrate was exhausted, phosphate uptake changed to release. Moreover, the time of this turning point occurred later with the higher nitrate addition. On the other hand, through on-line monitoring the variation of the ORP with different initial COD concentration, it was found ORP could be used as a control parameter for phosphorus release, but it is impossible to utilize ORP for controlling the denitrificaion and anoxic phosphorus uptake operations.     

风景区环境噪声的模糊综合评价

通过对城市风景旅游公园内各不同功能的景点区进行环境噪声实测和对游人进行主观反应调查,运用模糊数学的原理,对公园环境噪声进行综合评价。在目前尚未对城市风景旅游公园建立专门的噪声标准的情况下,这一评价方法对正确评估城市风景旅游公园的声环境质量有积极的实用意义。     

垃圾在流化床中燃烧的特性

在一台特别设计的小型流化床燃烧实验台上对垃圾可燃物代表组分进行实验研究 .结果表明 ,干燥的垃圾在床温仅为 50 0℃就能在很短的时间内迅速燃烧 ,产生明亮的火焰 .在本实验条件下 ,床温没有因为实验组分的加入而下降 ,而是随着垃圾的迅速燃烧而急剧升温 ,床温提高 30～ 70℃不等 .垃圾在流化床中燃烧受多种因素的影响 ,并讨论了当物料形状 (整或碎 )、含水量、实验风量 (从 5.5m³/h到 7.5m³/h)等因素变化后对于燃烧气体成分及炉内温度的影响 .在本实验条件下 ,当物料剪碎后会引起炉内温度水平明显提高 ,并使得CO排放量略有下降 .物料含水量增加时会导致炉内温度水平明显下降 .实验风量提高时 ,CO排放量明显减少 .     

美国海岸警备队的溢油鉴别系统

介绍了美国海岸警备队溢油鉴别系统的发展概况，溢油鉴别策略、原理、方法，溢油鉴别数据的产生与解释、分析报告，影响溢油鉴别的因素以及溢油鉴别系统的发展方向。     

Spectroscopic study on transformations of dissolved organic matter in coal-to-liquids wastewater under integrated chemical oxidation and biological treatment process

A large amount of wastewater containing various toxic organic contaminants is produced during coal-to-liquids process. In this study, several spectroscopic methods were used to monitor the transformation of organic pollutants during an integrated chemical oxidation and biological process. The results showed that the hydrophobic acid fraction increased after Fenton oxidation, which was likely due to the production of small-molecule organic acids. Soluble microbial products were generated during biological treatment processes,which were degraded after ozonation; meanwhile, the hydrophilic base and acid components increased. Ultraviolet-visible spectroscopic analysis indicated that peaks at the absorption wavelengths of 280 and 254 nm, which are associated with aromatic substances, were detected in the raw water. The aromatic substances were gradually removed, becoming undetectable after biological aeration filter(BAF) treatment. Fourier transform infrared spectroscopy analysis revealed that the functional groups of phenols;benzene, toluene, ethylbenzene, and xylene(BTEX); aromatic hydrocarbons; aliphatic acids;aldehydes; and esters were present in raw wastewater. The organic substances were oxidized into small molecules after Fenton treatment. Aromatic hydrocarbons were effectively removed through bioadsorption and biodegradation after BAF process.Biodegradable organic matter was reduced and finally became undetectable after anoxic–oxic treatment in combination with a membrane bioreactor. Four fluorescent components were fractionated and obtained via excitation–emission matrix parallel factor analysis(EEM-PARAFAC). Dissolved organic matter fractionation in conjunction with EEM-PARAFAC was able to monitor more precisely the evolution of characteristic organic contaminants.     

Chemical formation and source apportionment of PM2.5 at an urban site at the southern foot of the Taihang mountains

The region along the Taihang Mountains in the North China Plain (NCP) is characterized by serious fine particle pollution. To clarify the formation mechanism and controlling factors, an observational study was conducted to investigate the physical and chemical properties of the fine particulate matter in Jiaozuo city, China. Mass concentrations of the water-soluble ions (WSIs) in PM_2.5 and gaseous pollutant precursors were measured on an hourly basis from December 1, 2017, to February 27, 2018. The positive matrix factorization (PMF) method and the FLEXible PARTicle (FLEXPART) model were employed to identify the sources of PM_2.5. The results showed that the average mass concentration of PM_2.5 was 111 μg/m³ during the observation period. Among the major WSIs, sulfate, nitrate, and ammonium (SNA) constituted 62% of the total PM_2.5 mass, and NO₃^? ranked the highest with an average contribution of 24.6%. NH₄⁺ was abundant in most cases in Jiaozuo. According to chemical balance analysis, SO₄^2?, NO₃^?, and Cl^? might be present in the form of (NH₄)₂SO₄, NH₄NO₃, NH₄Cl, and KCl. The liquid-phase oxidation of SO₂ and NO₂ was severe during the haze period. The relative humidity and pH were the key factors influencing SO₄^2- formation. We found that NO₃^? mainly stemmed from homogeneous gas-phase reactions in the daytime and originated from the hydrolysis of N₂O₅ in the nighttime, which was inconsistent with previous studies. The PMF model identified five sources of PM_2.5: secondary origin (37.8%), vehicular emissions (34.7%), biomass burning (11.5%), coal combustion (9.4%), and crustal dust (6.6%).