Comparison of Surface Organic Compound Mass Spectrum Patterns by LD-TOFMS for Megalopolis Atmospheric Particles and Diesel Exhaust Particles (DEP)

PM_2.5 and PM₁₀ samples for megalopolis atmospheric particles were collected at Shinjuku, Tokyo in December 1998–January 1999 and August 1999, for two weeks both in winter and summer, with a 24 hr sampling interval. Sampling of PM_2.5 and PM₁₀ in diesel exhaust particles (DEP) was carried out using an automobile exhaust testing system, with a diesel truck placed on a chassis dynamometer. Sampling conditions included idling, constant speed of 40 km hr^-1, M-15 test pattern and 60%-revolution/40%-load of maximum power. Mass spectrums of organic compounds adhering to the surface of the PM_2.5 and PM₁₀ samples were analyzed by laser desorption time-of-flight mass spectrometry (LD-TOFMS, analytical mass range: m/z 1–m/z 380 000). LD-TOFMS analysis of those samples revealed consistently the detection of low-mass organic compounds up to m/z 800. For the megalopolis atmospheric particles, the mass spectrum pattern of wintertime samples was almost the same as that of the summertime samples for both PM_2.5 and PM₁₀. The major peak was m/z 177, and the minor peaks were m/z 84, 94, 101, 163, 189 and 235. The mass spectrum pattern of DEP was the same for all samples under all test conditions. The major peak was m/z 101, and other detected peaks were small.     

Identification and detection sensitivity of <Emphasis Type="Italic">Microcystis aeruginosa</Emphasis> from mixed and field samples using MALDI-TOF MS

To verify the applicability of identifying Microcystis aeruginosa by matrix-assisted laser desorption-ionization-time-of-flight mass spectrometry (MALDI-TOF MS), mixed and field samples were employed to study the sensitivity and the analysis power, respectively. Series diluted samples and artificially mixed samples by the M. aeruginosa NIES-843 strain were designed to verify the sensitivity. The lowest detection limit was 1.955?×?10⁶ cells in pure samples, while for mixed samples, the lowest detection limit and ratio of NIES-843 strain were 2.88?×?10⁶ cells and 33.7%, respectively. The results provided a reference for the reasonable volume of the water sample in which the M. aeruginosa could be detected. Ribosomal protein biomarkers for identifying M. aeruginosa which were successfully detected from the field samples in Taihu Lake, indicated that the identification of M. aeruginosa by MALDI-TOF MS could be applied in field samples. Furthermore, different genetic types of M. aeruginosa strains were also detected at different locations in Taihu Lake, which revealed the diversity of M. aeruginosa and the detection power of MALDI-TOF MS at the strain level for the field samples. The sensitivity and detection power in the analysis of M. aeruginosa by the MALDI-TOF MS demonstrated the applicability of this method in routine environmental monitoring.     

Use of Escherichia coli BOX-PCR fingerprints to identify sources of fecal contamination of water bodies in the State of São Paulo, Brazil

Repetitive element sequence-based polymerase chain reaction (rep-PCR) is one of the commonest methods used to identify sources of fecal contamination of water systems. In this work, BOX-A1R-based repetitive extragenic palindromic-PCR (BOX-PCR) was used to discriminate Escherichia coli strains originating from different animals and water sources, and the suitability of the technique for bacterial source tracking (BST) was evaluated. A total of 214 strains from humans, 150 strains from animals, 55 strains from sewage and 77 strains from water bodies were analyzed by the BOX-PCR technique. When maximum similarity between the fingerprints was used, a correct classification rate of 84% was achieved for strains from human and animal sources. Furthermore, 95% of the strains found in sewage were classified as being from human sources by at least one of the four classification tools used. Classification of the strains found in water bodies in the State of S?o Paulo was based on the fingerprints obtained for human and animal sources. Most of the sampling sites appeared to be affected by mixed sources of fecal contamination. The use of BOX-PCR for BST could be especially valuable in developing countries, where simplicity and cost are important considerations.     

Contributions of humic substances to the dissolved organic carbon pool in wetlands from different climates

Wetlands are an important source of DOM. However, the quantity and quality of wetlands' DOM from various climatic regions have not been studied comprehensively. The relationship between the concentrations of DOM (DOC), humic substances (HS) and non-humic substances (NHS) in wetland associated sloughs, streams and rivers, in cool temperate (Hokkaido, Japan), sub-tropical (Florida, USA), and tropical (Sarawak, Malaysia) regions was investigated. The DOC ranged from 1.0 to 15.6 mg CL(-1) in Hokkaido, 6.0-24.4 mg CL(-1) in Florida, and 18.9-75.3 mg CL(-1) in Sarawak, respectively. The relationship between DOC and HS concentrations for the whole sample set was regressed to a primary function with y-intercept of zero (P<0.005) and a slope value of 0.841. A similar correlation was observed between DOC and NHS concentrations, with a smaller slope value of 0.159. However, the correlation coefficient of the latter was much larger when the data was regressed to a logarithmic curve. These observations suggest the presence of a general tendency that the increased DOC in the river waters was mainly due to the increased supply of HS from wetland soils, whereas the rate of the increase in the NHS supply has an upper limit which may be controlled by primary productivity.     

Polyfluorinated telomers in indoor air of Japanese houses

The fluorotelomer alcohols (FTOHs) have been detected in various environmental compartments, including indoor and outdoor air, in North America and Europe. In our previous studies, FTOHs were detected at a relative higher concentration in outdoor air in the Keihan (Kyoto–Osaka, one of the major industrial zones) area, Japan compared to reported data. The exposure level of FTOHs in indoor air in the Keihan area remains unclear. In the present study, indoor air FTOH concentrations were investigated using a passive air sampler containing activated carbon felts. The indoor air sampling was conducted in 49 households of the Keihan area, during winter and summer 2008. Most samples contained 6:2 FTOH, 8:2 FTOH, 10:2 FTOH and 8:2 FTOAc. The median concentration of 8:2 FTOH (5.84 ng m^?3) was highest among fluorotelomers, followed by those of 10:2 FTOH (1.12 ng m^?3), 6:2 FTOH (0.29 ng m^?3), and others. Significant correlations among fluorotelomers were observed in collected samples. The association between housing conditions and 8:2 FTOH concentrations showed that samples collected from bed rooms have higher 8:2 FTOH concentrations than those collected from other locations. In addition, samples collected in winter showed lower levels of 8:2 FTOH than those collected in summer. These findings suggest that 8:2 FTOH is the predominant component among fluorotelomers in indoor air, and that there are emission sources of fluorotelomers in indoor environments of the Keihan area. Further investigations into the origins of fluorotelomers are needed to evaluate indoor contamination with fluorotelomers.     

An Ex Post Cost-Benefit Analysis of the Nitrogen Dioxide Air Pollution Control Program in Tokyo

ABSTRACT

The benefits and costs of past nitrogen dioxide (NO₂) control policies were calculated for Tokyo, Japan, using environmental, economic, political, demographic, and medical data from 1973 to 1994. The benefits of NO₂ control were estimated as medical expenses and lost work time due to hypothetical no-control air concentrations of NO₂. Direct costs were calculated as annualized capital expenditures and 1 year's operating costs for regulated industries plus governmental agency expenses. The major findings were as follows:

(1) Using Tokyo's average medical cost of pollution-related illness, the best net estimate of the avoided medical costs due to incidence of phlegm and sputum in adults was 730 billion yen ($6.08 billion; 1 U.S. dollar = 120 yen).

(2) The best net estimate of the avoided medical costs due to incidence of lower respiratory illness in children was 93 billion yen ($775 million).

(3) Using Tokyo's average duration of pollution-related illness and average wages, the best net estimate of the avoided costs of lost wages in workers was 760 billion yen ($6.33 billion).

(4) The best net estimate of the avoided costs of lost wages in mothers caring for their sick children was 100 billion yen ($833 million).

(5) Using Tokyo-specific data, the best net costs were estimated as 280 billion yen ($2.33 billion).

(6) Using human health and productivity benefits, and annualized capital cost and operating cost estimates, the best net benefits-to-costs ratio was 6:1 (upper limit 44:1; lower limit 0.3:1). Benefit calculations were sensitive to assumptions of mobile source emissions and certain health impacts that were not included. Cost calculations were highly dependent on assumptions of flue gas volume and fuel use. For comparative purposes, we identified other studies for air pollution-related illness. Assumptions that formed the basis for most of the inputs in the present study, such as duration of illness, medical treatment costs, per person illness in children, and lost wages for working mothers, were similar to those recommended in the literature. Lost wages in sick workers and per capita illness incidence in adults were higher than numbers reported elsewhere. Further advances in cost-benefit analysis (CBA) procedures to evaluate the economic effectiveness of NO₂ controls in Tokyo are recommended to estimate impacts and values for additional human health benefits, ecosystem health and productivity effects, and nonliving system effects, as well as benefits of ancillary reductions in other pollutants. The present study suggests that Tokyo's past NO₂ control policies in total were economically quite effective.     

Organochlorine concentrations in breast milk and prevalence of allergic disorders in Japanese women

Persistent organic pollutants have been shown to have immunomodulating effects in humans. However, epidemiological evidence regarding the relationships between organochlorine compound exposure and allergic disorders coming from studies of children has been limited and inconsistent. The current cross-sectional study examined the associations between the concentrations of β-hexachlorocyclohexane (HCH), hexachlorobenzene (HCB), p,p'-dichlorodiphenyldichloroethylene (DDE), and trans-nonachlordane in breast milk and the prevalence of allergic disorders in 124 adult Japanese women. The definition of wheeze and asthma was based on criteria from the European Community Respiratory Health Survey whereas that of eczema and rhinoconjunctivitis was based on criteria from the International Study of Asthma and Allergies in Childhood. Adjustment was made for age, smoking, family history of allergic disorders, and education. The prevalence values of wheeze, asthma, eczema, and rhinoconjunctivitis in the past 12 months were 9.7%, 4.8%, 13.7%, and 29.8%, respectively. The median concentrations of β-HCH, HCB, p,p'-DDE, and trans-nonachlordane in breast milk were 28.3, 7.0, 71.6, and 23.9 ng g(-1) lipid, respectively (range, 4.5-253, 2.1-14.5, 7.5-362, and 1.8-130 ng g(-1) lipid, respectively). When the exposures were treated as continuous variables, no significant associations were found between concentrations of HCB, β-HCH, p,p'-DDE, or trans-nonachlordane and the prevalence of wheeze, asthma, eczema, or rhinoconjunctivitis. Our results suggest that concentrations of β-HCH, HCB, p,p'-DDE, and trans-nonachlordane in breast milk are not evidently associated with the prevalence of wheeze, asthma, eczema, or rhinoconjunctivitis in young female Japanese adults.     

Characterization of an adsorbed humin-like substance on an allophanic soil formed via catalytic polycondensation between catechol and glycine, and its adsorption capability to pentachlorophenol

An allophanic soil (AS) catalyzed the formation of dark-colored polymers via polycondensation reactions between catechol and glycine. The organic carbon content of the AS was increased from 0.16% to 1.3%, indicating that some of the dark-colored polymers had been adsorbed to the AS. The characteristics of the dark-colored polymers adsorbed on the AS were similar to those of a humin that is not extractable with an aqueous alkaline solution. Such a humin-like substance (HuLS) was separated from the AS by treatment with a mixture of HF and HCl. The HuLS and humic acid-like substance (HaLS), comprising the acid-insoluble fraction in the reaction mixture, were characterized by elemental analysis, size exclusion chromatography, pyrolysis-GC/MS and ¹³C NMR. However, the structural features of HaLS and HuLS had many points in common. These results suggest that HuLS-AS can be regarded as an organo-clay complex formed by the strong adsorption of HaLS to the AS. The adsorption of pentachlorophenol (PCP) to AS and HuLS-AS was examined at pH 5.5. At this pH, the zeta potential of the HuLS-AS showed a negative value. It would, therefore, be expected that pentachlorophenolate anions would adsorb with difficulty to HuLS-AS because of electrostatic repulsion. Nevertheless, the adsorption coefficient for PCP to HuLS-AS, as estimated by the Freundlich isotherm, was seven times larger than that for AS. These results show that HuLS, when adsorbed on the AS surface, has the capability to enhance the adsorption of PCP.     

Regional and seasonal characteristics of emission sources of fine airborne particulate matter collected in the center and suburbs of Tokyo, Japan as determined by multielement analysis and source receptor models

Airborne particulate matter, suspected to induce adverse effects on human health, have been one of the most important concerns regarding recent air pollution issues in Japan. To characterize regional and seasonal variations in emission sources of fine airborne particulate matter (d < 2 microm), monthly samples (n = 36 for each site) were collected at urban (Tokyo), suburban (Maebashi), and mountainous (Akagi) sites in Japan from April 2003 to March 2006. Multielement analysis of chemical species (Na, Al, K, Ca, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Sb, and Pb) was performed by inductively coupled plasma-atomic emission spectrometry and inductively coupled plasma-mass spectrometry. The combined source receptor model, which consists of positive matrix factorization and chemical mass balance, determined the contributions of nine emission sources (local and continental soils, road dust, coal and oil combustion, waste incineration, steel industry, brake wear, and diesel exhaust) to the observed elemental concentrations. Large regional differences were identified in the source contributions among the observational sites. Diesel exhaust was identified as the most significant source (70% of identified contributions) at the urban site. Local and continental soils, coal combustion, and diesel exhaust were intricately assigned (20-30% each) to the suburban site. Continental soil was the predominant source (65%) at the mountainous site. Respective significant source contributions dominated the seasonal variations of total elemental concentrations at each site. These results suggest that a better understanding of the regional and seasonal characteristics of impacting emission sources will be important for improving regional environments.     

Mechanical properties of steel slag replaced mineral aggregate for road base/sub-base application based Vietnam and Japan standard

Steelmaking slag is one of the most massive industrial by-products generated during steelmaking processes. This paper presents the current steelmaking slag production status and its potential to use as mineral aggregates in base/sub-base layer of road pavement. The mechanical properties of steelmaking slag were confirmed by the test method specified in Vietnam specification. The volume stability test of the slag was conducted based on JIS A 5015-2018 (Japanese Industrial Standard: Iron and steel slag for road construction). From the results, it was confirmed that steelmaking slag can satisfy all the mechanical requirements specified in Vietnam specification and the requirements regarding stability specified in JIS A 5015-2018. In addition, it was found that the elastic modulus of steelmaking slag applied as a base or sub-base layer in pavement was higher than that of the conventional graded aggregate made from mineral aggregate. Therefore, the thickness of pavement can be reduced by using steelmaking slag, and the construction cost can be lower.