Evaluation of thermally treated asbestos based on fiber number concentration determined by transmission electron microscopy

Appropriate treatment of asbestos waste is a significant problem. In Japan, inertization of asbestos-containing waste by novel techniques approved by the Ministry of the Environment is now promoted. A quantitative method of testing with high sensitivity to the asbestos levels present in the inertization products is required for the approval process, but many testing methods are only qualitative. Thus, we have developed an evaluation method for asbestos in inertized products, consisting of the extraction of fibers from inertized products and determination of fiber number concentration by transmission electron microscopy. We adopted this testing method to evaluate thermally treated asbestos. It was found that fiber number concentrations of thermally treated asbestos decreased with increased treatment temperature, and were below the environmental level (10² Mf/g) at more than 1000 °C for chrysotile and crocidolite and more than 1400 °C for amosite and other amphibole forms of asbestos.     

Preparation of Cationic/Anionic Chitin Nanofiber Composite Materials

In this study, we investigated the preparation of cationic/anionic chitin nanofiber (CNF) composite materials by electrostatic interaction. An aqueous dispersion of amidinium CNF was prepared by a top-down approach, and a maleylated CNF film was obtained by a bottom-up approach from a chitin ion gel in an ionic liquid with subsequent maleylation on the CNFs. The resulting film was dispersed in ammonia (aq), which was then mixed with the aqueous cationic CNF dispersion to give the composite film. The composition of the two CNFs was evaluated by scanning electron microscopy and X-ray diffraction measurements. Tensile testing results indicated that the mechanical properties of the composites were enhanced with increasing degrees of substitution of the cationic and anionic groups on CNFs, and also when the molar ratio of these groups approached 1:1. The dissociation of the two kinds of CNFs by alkaline treatment of the composite film was achieved, suggesting the presence of an electrostatic interaction among the interactions between them.     

Mechanical properties of shotcrete with addition of sugarcane bagasse fiber and ash

Journal of Material Cycles and Waste Management - Shotcrete is a sprayed concrete placed on steep slopes that have been widely used because it can prevent surface weathering and erosion, and in...     

Seasonal variations of water column nutrients in the inner area of Ariake Bay, Japan: the role of muddy sediments

To investigate seasonal variations of nutrient distribution in the mudflat–shallow water system, we conducted field surveys once a month from August 2007 to July 2008 in the inner area of Ariake Bay (IAB), Japan. The NH₄ ⁺–N concentration of the water column increased in autumn because of the high NH₄ ⁺ release from the sediments, ranging from 850 to 3,001 μmol?m^?2?day^?1. The NO₃ ^?–N concentration was maximal in January, which was thought to be caused by NO₃ ^? release from the oxic sediments and by NO₃ ^? regeneration due to water column nitrification. The PO₄ ^3?–P concentration of the water column was high in summer–autumn due to the high PO₄ ^3? release from the reduced sediments, ranging from 22 to 164 μmol?m^?2?day^?1. We estimated the total amounts of DIN and PO₄ ^3?–P release (R _DIN and $ {R_{{\mathrm{P}{{\mathrm{O}}_4}}}} $ , respectively) from the muddy sediment area of the IAB. In summer–autumn, R _DIN and $ {R_{{\mathrm{P}{{\mathrm{O}}_4}}}} $ corresponded to about 47.7 % of DIN input and about 116.6 % of PO₄ ^3?–P input from the river, respectively. Thus, we concluded that the muddy sediments were an important source of nutrients for the water column of the IAB during summer–autumn. In addition, we found that phosphorus necessary for the growth of Porphyra (Porphyra yezoensis, Rhodophyceae) would be insufficient in the water column when phosphorus during the Porphyra aquaculture period is supplied only from the river. Therefore, the phosphorus release from the muddy sediments was thought to play an important role in the sustainable production of Porphyra in Ariake Bay.     

Detection of Escherichia coli in a cattle manure composting process by selective cultivation and colony polymerase chain reaction

Livestock manure is suitable for use as a composting material. However, various intestinal microbes, such as Escherichia coli, are significant components of such manures. Thus, it is desirable that the level of intestinal microbes, and particularly opportunistic pathogens, in compost is inspected and counted regularly. The sensitivity and specificity of detection of E. coli in compost have been improved by selective cultivation followed by colony polymerase chain reaction (PCR) using the ECO primer. Indeed, the sensitivity of this method is higher than that of DNA extraction from compost and PCR. In this study, changes in numbers of E. coli present in a field-scale composting process over time was assessed using selective cultivation and colony PCR. Numbers of ECO-positive colonies after 24 h decreased, with a concomitant rise in compost temperature. ECO-positive colonies were not detected from 33 to 48 h. However, ECO-positive colony numbers increased beginning on day 4 and continuing until day 42. Thus, it seems likely that the high temperatures reached during the composting process did not affect E. coli numbers in the final compost. Additionally, selective cultivation followed by colony PCR using specific primers is an appropriate method of determining levels of cultivable pathogens in composted materials.     

Potential for microbially mediated redox transformations and mobilization of arsenic in uncontaminated soils

Surface soil samples, which had no significant As contamination, were examined for As(V) reduction, As(III) oxidation and As mobilization capability. All five soil samples tested exhibited microbial As(V)-reducing activities both in aerobic and anaerobic conditions. Under aerobic conditions when As(V) reduction had almost ceased, oxidation of As(III) to As(V) occurred, whereas only As(V) reduction was observed under anaerobic conditions. In cultures incubated with As(III), As(III) was oxidized by indigenous soil microbes only under aerobic conditions. These results indicate that microbial redox transformations of As are ubiquitous in the natural environment regardless of background As levels. Mobilization through microbially mediated As(V) and Fe(III) reduction occurred both in the presence and absence of oxygen. Significant variation in dissolved As occurred depending on the Fe contents of soils, and re-immobilization of As arose in the presence of oxygen, presumably as a consequence of dissolved As(III) and Fe(II) oxidation. There was no apparent correlation between dissolved Fe(II) and As, suggesting that reductive dissolution of Fe(III) minerals does not necessarily determine the extent of As release from soils.     

Preparation of Cellulose/Xanthan Gum Composite Films and Hydrogels Using Ionic Liquid

This paper reports the preparation of cellulose/xanthan gum composite films and hydrogels through gelation with an ionic liquid. Mixtures of cellulose and xanthan gum in desired weight ratios with an ionic liquid, 1-butyl-3-methylimidazolium chloride (BMIMCl), were thinly placed on a Petri dish and heated at 100 °C for 9 h to obtain the solutions. Then, the solutions were left standing at room temperature for 1 day for the progress of gelation. The resulting ion gels were subjected to Soxhlet extraction with ethanol to remove BMIMCl, followed by drying under ambient conditions to obtain the composite films. The crystalline structures of the polysaccharides and the mechanical properties were evaluated by powder X-ray diffraction measurement and tensile testing of the films, respectively. The ion gels in various cellulose/xanthan gum weight ratios, which were prepared in a test tube by the same procedure, were immersed in water for the exchange of disperse media to obtain the cellulose/xanthan gum composite hydrogels. Water contents of all the materials were higher than 90 %. The mechanical properties of the hydrogels were evaluated by compressive testing.     

Application of a tri-capital community resilience framework for assessing the social–ecological system sustainability of community-based forest management in the Philippines

This study proposes and empirically tests a framework that integrates the concepts of community resilience and social–ecological system (SES) resilience through community forestry case studies. The framework provides a possible approach for assessing community resilience based on the development and allocation of socio-cultural, economic, and natural capital of individual households within a given forest community. Furthermore, aspects of SES resilience and system dynamics are used to define the potential state thresholds of community resilience. This exploratory attempt to quantify community resilience, using the proposed framework, aims to advance understanding of the conceptual overlaps of SES and community resilience as applied to forestry management. We consider community forestry groups as SES examples in which the community is an important stakeholder in managing natural forest capital. We selected pioneer communities under the community-based forest management (CBFM) Program in the Philippines as our case studies. We found that, on average, CBFM group members demonstrated moderate levels of resilience according to their acquired levels of capital. Although economic capital remained the weakest capital, the CBFM program had a positive effect in increasing the socio-cultural and natural capital of an entire community.     

Electrochemical behaviors of sulfhydryl compounds in the presence of elemental mercury

In the expression of bioaccumulated elemental mercury (Hg 0) toxicity, the first Hg 0 oxidation step is crucial. Therefore, to clarify the mechanism underlying the interactions of sulfhydryl (SH) compounds and Hg 0 in the present study, we analyzed the oxidation of reduced glutathione (GSH) and L-cysteine (Cys) in the presence of Hg 0 in aqueous solution by cyclic voltammetry (CV). Production of Hg2+ in the reaction mixture was found to increase along with a decrease in free SH residues. CV showed that the oxidation of Cys increased after a 4-h incubation in the presence of Hg(0), but the oxidation of Cys after a 24-h incubation was suppressed. Conversely, GSH oxidation increased with incubation time in the absence of Hg(0). In the presence of Hg(0), the oxidation of GSH was suppressed. The different reactivities of Cys and GSH with Hg(0) may arise from differences in their oxidation/reduction potentials and pH. The important SH compound interactions with Hg(0) oxidation were as follows: (i) oxidation of Hg(0) to form either mercurous ion (Hg+) or mercuric ion (Hg2+) which both form stable complexes in aqueous solution as Hg I (RS) or Hg II(RS)2; (ii) catalyzed oxidation of SH compounds in the presence of Hg 0; and (iii) suppression of the oxidation of SH compounds due to the reduced concentration of free SH compounds through the binding of SH compounds with Hg+ or Hg2+ The present results demonstrate the chemical reaction processes by which Hg 0 dissolves in aqueous solution in the presence of SH compounds, and contribute to our understanding of SH compounds in non-enzymatic Hg 0 oxidation in vivo.     

Changes in water-extractability of soil inorganic phosphate induced by chloride and sulfate salts

GOAL, SCOPE AND BACKGROUND: One of the principal experimental variables which effect the results of phosphorus (P) sorption studies is the ionic composition, in addition to both species and concentrations of the contacting solution. In spite of the realization that ionic species, concentrations and their compositions effect P sorption and/or desorption, most of the salt-related studies are confined to Cl- (anion) in association with different cations. While the knowledge about the comparative response of P to Cl- and SO4(2-) ions was lacking, the current study was conducted to evaluate the comparative effects of anions (in association with cations) on inorganic P release and P fractions in the soil. METHODS: The test soil was amended with livestock compost manure (OP); KH2PO4 (IPk) or Ca(H2PO4)2 (IPc) at a rate of 1ppm. Soil was subjected to one salt and nine subsequent water extractions and different P fractions were measured. Four salt types, NaCl, Na2SO4, KCl and K2SO4, were used at levels of 0.5 M. RESULTS: Irrespective of P sources, P release was substantially increased in the salt-pretreated soil as compared to the non-saline soil. Sulfate salts released more P in subsequent water extractions than Cl-. Phosphorus release decreased for salt types with Na2SO4 > NaCl > K2SO4 > KCl and for P sources with OP approximately IPk > Control (without P application) > IPc, respectively. DISCUSSION: No previous study was found to compare the results of more P release by SO4(2-) than Cl- salt. Most of the previous studies focused on anion sorption capacities, but the mechanism for their adsorption is not fully known. Most of the authors suggested that the mechanisms of SO4(2-) and PO4(3-) adsorption are similar, and that both ions compete for the same sorption sites (Kamprath et al. 1956, Couto et al. 1979, Pasricha and Fox 1993). Although adsorbed SO4(2-) does not compete strongly with PO4(3-), there is likely to be some competition for sorption between these anions which may cause comparatively more P release by SO4(2-) than Cl- salts. Higher P release by Na-saturation could be due to the release of P associated with oxide surfaces or due to dissolution of Ca-P phases (Curtin et al. 1987). CONCLUSIONS: Study clearly showed that not only cations species differ for P desorption capacity, but associated anions also play a vital role in the fate of P under saline environments. Synergetic effects exist between Na and SO4(2-) ions which enhanced the P release. This study has also confirmed the fact that P from organic sources is available as well as from inorganic P sources. However, P release depends more on the type of P source applied than on total P. RECOMMENDATIONS AND PERSPECTIVES: It is highly recommended that more than one anion species must be used in the research plans for evaluating the P response in a saline environment. The results have important implications from the point of view of research, as most of the researchers focus on different cations only for evaluating P response to salts from an environmental point of view. However, our study has made it clear that anions in association with cations differed for their effects on P release.