Validation of Methods for Determination of Metabolic Rate in the Edholm Scale and ISO 8996

The aim of this study was to validate the Edholm scale (Edholm, 1966) and the ISO 8996 standard (International Organization for Standardization [ISO], 1990) by comparing the metabolic rates estimated for both methods with the actual measured metabolic rate (M_Meas) in 6 manual material handling tasks simulated under laboratory conditions. The metabolic rate was calculated from oxygen consumption VO₂ (19 participants) according to Standard No. ISO 8996 (ISO, 1990). Additionally, the participants estimated perceived exertion using the Borg scale. The metabolic rates derived from the Edholm scale (M_Edh) overestimated 5 of 6 activities by 34-50% (α = .05). The metabolic rates derived from ISO 8996 (M_ISO) overestimated all activities by 7-38% (α =.05).     

Determination of Heat Loss from the Feet and Insulation of the Footwear

This study compared the methods of determining footwear insulation on human participants and a thermal foot model. Another purpose was to find the minimal number of measurement points on the human foot that is needed for insulation calculation. A bare foot was tested at 3 ambient temperatures on 6 participants. Three types of footwear were tested on 2 participants. The mean insulation for a bare foot obtained on the participant and model were similar. The insulation of warm footwear measured by the 2 methods was also similar. For thin footwear the insulation values from the participants were higher than those from the thermal model. The differences could be related to undefined physiological factors. Two points on the foot can be enough to measure the insulation of footwear on human participants (r = .98). However, due to the big individual differences of humans, and good repeatability and simplicity of thermal foot method, the latter should be preferred for testing.     

A Comparison of Two Methods of Determining Thermal Properties of Footwear

The present European Standard for footwear testing (Standard No. EN 344:1992; European Committee for Standardization [CEN], 1992) classifies footwear thermally by a temperature drop inside the footwear during 30 min at defined conditions. Today, other methods for footwear thermal testing are also available. The aim of this study was to compare EN 344:1992 with a thermal foot method. Six boots were tested according to both methods. Additional tests with modified standard tests were also carried out. The methods ranked the footwear in a similar way. However, the test according to standard EN 344:1992 is a pass-or-fail test, whereas data that is gained from the thermal foot method gives more information and allows further use in research and product development. A change of the present standard method is suggested.     

Effect of Sweating on Insulation of Footwear

The study aimed to find out the influence of sweating on footwear insulation with a thermal foot model. Simultaneously, the influence of applied weight (35 kg), sock, and steel toe cap were studied. Water to 3 sweat glands was supplied with a pump at the rate of 10 g/hr in total. Four models of boots with steel toe caps were tested. The same models were manufactured also without steel toe. Sweating reduced footwear insulation 19–25% (30–37% in toes). During static conditions, only a minimal amount of sweat evaporated from boots. Weight affected sole insulation: Reduction depended on compressibility of sole material. The influence of steel toe varied with insulation. The method of thermal foot model appears to be a practical tool for footwear evaluation.     

An approach for domino effect reduction based on optimal layouts

An approach to reduce the probability of producing a domino effect in process industry is developed in this work. It is assumed that optimal layouts should include appropriate analysis to reduce risk during the process design stage. The model developed for this approach combines the estimation of probability of damage due to overpressure, proposed by Mingguang and Juncheng (2008), and escalation threshold values defined by Cozzani, Gubinelli, and Salzano (2006). These equations are combined with other typical layout constraints as well as bounding the probability constraint, which has resulted in a highly non-linear MINLP problem. Solving a case study used by other authors provides evidence for reliability of the developed approach. In this way, layouts are designed to reduce the escalation probability yielding safe distributions.     

The Effect of Protective Gloves on Manual Dexterity in the Cold Environments

This article presents a study on the effect of different protective gloves (which are commercially available and commonly used in the cold) on manual dexterity in cold environments. The experiments compared statistically four different types of gloves and two different types of gloving (outer or double) at +19 °C and -10 °C. Performance was determined both objectively and subjectively using two manual dexterity tasks: bolt-nut and pick-up tasks. The response measured was the time of performing each task. Statistical analysis showed that all independent factors such as glove type, participant, object size, and temperature had significant effects on the hand cooling reaction. A significant difference in the performance between the gloves was found in the bolt-nut task. It was also found that outer-inner combination gloving may be an approach to use for precision tasks.     

Multiple-criteria decision-aiding framework to analyze and assess the governance of sustainability

Past and present disasters and scandals, such as the BP Deepwater Horizon oil disaster in the Gulf of Mexico in 2010, the Servier Mediator (Benfluorex) scandal in 2009 and the Enron collapse in 2001, have uncovered weaknesses in governance issues. The authors argue that there is a need to develop methods and tools to diagnose and assess the governance of organizations with respect to Sustainable Development (SD). However, this task remains difficult due to the fact that it is difficult to appraise the quality of governance. The authors propose a protocol to diagnose and analyze the governance of SD and explore the use of multiple-criteria decision-aiding methods to achieve this task. Two aggregation methods to assess the global governance are proposed: (1) The identification of a final governance index for an Organization. This method helps in establishing a global diagnosis of the quality of the governance of an Organization with respect to SD challenges. The governance index is based on the calculation of three indexes: the partial opportunity index, the partial risk index and the partial equilibrium index. (2) The ranking of a set of Organizations according to their governance of SD. This method aims at assessing a set of Organizations based on a pairwise comparison according to a set of criteria that represents the seven domains of the ISO 26000 norm (ISO 26000—Guidance on social responsibility, 2010). This method is based on the outranking aggregation approach ELECTRE III. A practical example is used to illustrate two methods of governance assessment.     

Hummingbird with modern feathering: an exceptionally well-preserved Oligocene fossil from southern France

Hummingbirds (Trochilidae) today have an exclusively New World distribution, but their pre-Pleistocene fossil record comes from Europe only. In this study, we describe an exceptionally preserved fossil hummingbird from the early Oligocene of southeastern France. The specimen is articulated, with a completely preserved beak and feathering. Osteological characters allow to identify it as Eurotrochilus sp. This genus is a stem group representative of Trochilidae and was recently described from the early Oligocene of southern Germany. The new fossil reveals that these European Trochilidae were remarkably modern in size, skeletal proportions and the shape of the wing, tail and beak and hyoid bones. These features confirm the early acquisition of the abilities of hovering and nectarivory in hummingbirds, probably before the Oligocene. In several morphological characteristics, they resemble members of the 'true hummingbirds' (subfamily Trochilinae) and differ from hermits (Phaethornithinae). These features, which include a short and square tail and a moderately long, almost straight beak, appear to be primitive within the family Trochilidae.     

Glass buildings on river banks as “polarized light traps” for mass-swarming polarotactic caddis flies

The caddis flies Hydropsyche pellucidula emerge at dusk from the river Danube and swarm around trees and bushes on the river bank. We document here that these aquatic insects can also be attracted en masse to the vertical glass surfaces of buildings on the river bank. The individuals lured to dark, vertical glass panes land, copulate, and remain on the glass for hours. Many of them are trapped by the partly open, tiltable windows. In laboratory choice experiments, we showed that ovipositing H. pellucidula are attracted to highly and horizontally polarized light stimulating their ventral eye region and, thus, have positive polarotaxis. In the field, we documented that highly polarizing vertical black glass surfaces are significantly more attractive to both female and male H. pellucidula than weakly polarizing white ones. Using video polarimetry, we measured the reflection-polarization characteristics of vertical glass surfaces of buildings where caddis flies swarmed. We propose that after its emergence from the river, H. pellucidula is attracted to buildings by their dark silhouettes and the glass-reflected, horizontally polarized light. After sunset, this attraction may be strengthened by positive phototaxis elicited by the buildings' lights. The novelty of this visual-ecological phenomenon is that the attraction of caddis flies to vertical glass surfaces has not been expected because vertical glass panes do not resemble the horizontal surface of waters from which these insects emerge and to which they must return to oviposit.     

Aggressions and size-related fecundity of queenless workers in the ant <Emphasis Type="Italic">Cataglyphis cursor</Emphasis>

In social hymenoptera, the reproductive division of labor is often linked to differences in individual body size with the reproductive caste (the queen) being larger than the workers. Likewise, the reproductive potential may vary with size within the worker caste and could affect the evolution of worker size in social insects. Here, we tested the relationship between worker size and reproductive potential in the facultative parthenogenetic ant Cataglyphis cursor. Colonies are headed by a multiply mated queen, but workers can produce gynes (virgin queens) and workers by thelytokous parthenogenesis after the queen's death. We observed the behaviour of workers (n = 357) until the production of gynes (212 h over 3 months) in an orphaned colony (mated queen not present). The size of workers was measured, and their paternal lineage determined using six microsatellite markers, to control for an effect of patriline. Larger workers were more likely to reproduce and lay more eggs indicating that individual level selection could take place. However, paternal lineage had no effect on the reproductive potential and worker size. From the behavioural and genetic data, we also show for the first time in this species, evidence of aggressive interactions among workers and a potential for nepotism to occur in orphaned colonies, as the five gynes produced belonged to a single paternal lineage.