Heavy metals in untreated/treated urban effluent and sludge from a biological wastewater treatment plant

Background, Aim and Scope

The presence of heavy metals in wastewater is one of the main causes of water and soil pollution. The aim of the present study was to investigate the removal of Cd, Cu, Pb, Hg, Mn, Cr and Zn in urban effluent by a biological wastewater treatment, as well as to quantify the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sn, Tl, V and Zn in dewatering sludge from the Biological Wastewater Treatment Plant to Ribeirão Preto (RP-BWTP), Brazil.

Materials and Methods

Concentrations of Cd, Cr, Cu, Mn and Pb in wastewater and those of Ni in sludge were determined by atomic absorption spectrophotometry with graphite furnace atomization. Mercury concentrations in wastewater were measured by hydride generation atomic spectrophotometry, and Zn levels were determined by atomic absorption spectrophotometry using acetylene flame. In sludge, the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Pb, Sn, Tl, V and Zn were determined by inductively coupled plasma-mass spectrometry.

Results

The percentages of removal efficiency (RE) were the following: Hg 61.5%, Cd 60.0%, Zn 44.9%, Cu 44.2%, PB 39.7%, Cr 16,5% and Mn 10.4%. In turn, the mean concentrations (mg/kg) of metals in dewatering sludge followed this increasing order: Tl (<0.03), Hg (0.31), Be (0.43), As (1.14), Cd (1.34), V (59.2), Pb (132.1), Sn (166.1), Cr (195.0), Mn (208.1), Ni (239.4), Cu (391.7), Zn (864.4) and Fe (20537).

Discussion

The relationship between metal levels in untreated wastewater, as well as the removal efficiency are in agreement with previous data from various investigators, It is important to note that metal removal efficiency is not only affected by metal ion species and concentration, but also by other conditions such as operating parameters, physical, chemical, and biological factors.

Conclusions

Metal values recorded for treated wastewater and sludge were within the maximum permitted levels established by the Environmental Sanitation Company (CETESB), São Paulo, Brazil.

Recommendations

There is an urgent need for the authorities who are responsible for legislation on sludge uses in agriculture of establishing safety levels for As, Be, Hg, Sn, Tl and V.

Perspectives

According to the current metal levels, RP-BWTP sludge might be used for agriculture purposes. However, for an environmentally safe use of sewage sludge, further studies including systematic monitoring are recommended. Annual metal concentrations and predicted variations of those elements in the sludge should be monitored.

     

A field trial for an ex-situ bioremediation of a drilling mud-polluted site

The remediation of drilling mud-polluted sites in the Southeast of Mexico is a top priority for Mexican oil industry. The objective of this work was to find a technology to remediate these sites. A field trial was performed by composting in biopiles, where four 1ton soil-biopiles were established, one treatment in triplicate and one unamended biopile. Amended biopiles were added with nutrients to get a C/N/P ratio of 100/3/0.5 plus a bulking agent (straw) at a soil/straw ratio of 97/3. Moisture content was maintained around 30-35%. Results showed that, after 180 d, total petroleum hydrocarbon (TPH) concentrations decreased from 99300+/-23000mgTPHkg(-1) soil to 5500+/-770mgTPHkg(-1) for amended biopiles and to 22900+/-7800mgTPHkg(-1) for unamended biopile. An undisturbed soil control showed no change in TPH concentrations. Gas chromatographic analysis showed residual alkyl dibenzothiophene type compounds. Highest bacterial counts were observed during the first 30 d which correlated with highest TPH removal, whereas fungal count increased at the end of the experimentation period. Results suggested an important role of the straw, nutrient addition and water content in stimulating aerobic microbial activity and thus hydrocarbon removal. This finding opens an opportunity to remediate old polluted sites with recalcitrant and high TPH concentration.     

Oxidation of trichloroethene over metal oxide catalysts: kinetic studies and correlation with adsorption properties

The performance of bulk chromium oxide is compared with that of a Mn commercial catalyst for the deep oxidation of trichloroethene (1000-2500ppmv, 55h(-1) space velocity) in air, in dry and wet (20000ppm of H(2)O) conditions, in terms of activity, selectivity and stability. Chromium oxide was found to be more active (on a catalyst weight basis), however its activity decreases continuously with time on stream. The presence of water increases its stability, the Mn catalyst showing the opposite behaviour. The effect of water on the Cr catalyst can be explained according to the Deacon equilibrium, as the presence of water tends to decrease the Cl(2) concentration, assumed to be responsible of the catalyst deactivation. Regarding to the selectivity, the Mn catalyst yields C(2)Cl(4), CCl(4) and CHCl(3) as organochlorinated by-products, whereas chromium oxide produces only trace amounts of CCl(4). Simple power-law kinetics expressions (first-order for Mn and zero-order for Cr) provide fairly good fits for the evolution of the conversion with the temperature. Furthermore, the kinetic behaviour of chromium oxide can be represented with a Langmuir-Hinshelwood model taking into account the chlorine inhibitory effect.     

Zinc and cadmium accumulation and tolerance in populations of Sedum alfredii

To investigate the variation of Zn and Cd accumulation and tolerance of Sedum alfredii (a newly reported Zn/Cd hyperaccumulator), field surveys and hydroponic experiments were conducted among three populations of this species: two originating from old Pb/Zn mines in Zhejiang (ZJ) and Hunan (HN) Provinces and one from a "clean" site in Guangdong (GD) Province, China. Under field conditions, up to 12,524 and 12,253 mg kg(-1) Zn, and 1400 and 97 mg kg(-1) Cd in shoots of ZJ and HN plants were recorded respectively. Under hydroponic conditions, ZJ and HN plants accumulated significantly higher Zn and Cd in their leaves and stems, and possessed significantly higher Zn and Cd tolerance than GD plants. Among the two contaminated populations, ZJ plants showed higher Cd tolerance and accumulation (in leaves) than HN plants. The present results indicate that significant differences in Zn and Cd accumulation and tolerance exist in populations of S. alfredii.     

Effects of dissolved ammonium addition and host feeding with Artemia salina on photoacclimation of the hermatypic coral Stylophora pistillata

 Effects of nutrient treatments on photoacclimation of the hermatypic coral Stylophora pistillata (Esper) were studied. Studies on photoacclimation of colonies from different light regimes in the field were evaluated and used to design laboratory experiments. Coral colonies were collected in the Gulf of Eilat (Israel) from January to March 1993. Exterior branches of colonies from different depths (1 to 40 m) displayed different trends in production characteristics at reduced and very low levels of illumination. From 24 ± 3% to 12 ± 2% of incident surface photosynthetic active radiation (PAR_o), zooxanthella population density and chlorophyll a+c per 10⁶ zooxanthellae increased, a trend seen in the range of light levels optimal for coral growth (90 to 30% PAR_o). The P _max of CO₂ per 10⁶ zooxanthellae decreased, while P _max of CO₂ per 10³ polyps increased, indicating an increase in zooxanthella population density at low light levels. Proliferous zooxanthella frequency (PZF, a measure of zooxanthella division) declined significantly at light levels <18 ± 3% PAR_o. At the lowest levels of illumination (<5% PAR_o), zooxanthella population density decreased, as did the PZF; chl a+c per 10⁶ zooxanthellae was unchanged. In 28-d experiments, exterior coral branches from the upper surfaces of colonies from 3 m depth (65 ± 4% PAR_o) were incubated in aquaria under bright (80 to 90% PAR_o), reduced (20 to 30% PAR_o), and extremely low (2 to 4% PAR_o) light intensities. At each light intensity, the corals were maintained in three feeding treatments: sea water (SW); ammonium enriched SW (SW + N); SW with Artemia salina nauplii (SW + A). An increase in P _max of CO₂ per 10³ polyps was found in corals acclimated to reduced light (20 to 30% PAR_o) in nutrient-enriched SW, while in SW, where the increase in zooxanthella population density was smaller, it did not occur. Nutrient enrichments (SW + N at 2 to 4% PAR_o and SW + A at 20 to 30% PAR_o) increased zooxanthella population density, but had no effect on chl a+c per 10⁶ zooxanthellae. Acclimation for 14 d to reduced (10 to 20% PAR_o) and extremely low (1 to 3% PAR_o) light intensities shifted ¹⁴C photoassimilation into glycerol and other compounds (probably glycerides), rather than sugars. Both ammonium addition and feeding with Artemia salina nauplii resulted in an increase in photosynthetic assimilation of ¹⁴C into amino acids. We conclude that acclimation to reduced light consists of two processes: an increase in photosynthetic pigments and in zooxanthella population density. Both processes require nitrogen, the increase in zooxanthella population density needing more; this adaptation is therefore limited in nitrogen-poor sea water. Received: 19 June 1998 / Accepted: 13 June 2000     

Assessing the Geographic Representativeness of Genebank Collections: the Case of Bolivian Wild Potatoes

Abstract: Genebank collection databases can be used for ecogeographical studies under the assumption that the accessions are a geographically unbiased sample. We evaluated the representativeness of a collection of wild potatoes from Bolivia and defined and assessed four types of bias: species, species-area, hotspot, and infrastructure. Species bias is the sampling of some species more often than others. Species-area bias is a sampling that is disproportionate to the total area in which a species is found. Hotspot bias is the disproportionate sampling of areas with high levels of diversity. Infrastructure bias is the disproportionate sampling of areas near roads and towns. Each of these biases is present in the Bolivian wild potato collection. The infrastructure bias was strong: 60% of all wild potato accessions were collected within 2 km of a road, as opposed to 22%, if collections had been made randomly. This analysis can serve as a guide for future collecting trips. It can also provide baseline information for the application of genebank data in studies based on geographic information systems.     

Conservation Genetics at the Species Boundary

Abstract: Conservation genetics has expanded its purview such that molecular techniques are now used routinely to prioritize populations for listing and protection and infer their historical relationships in addition to addressing more traditional questions of heterozygosity and inbreeding depression. Failure to specify whether molecular data are being used for diagnosis-related questions or for population viability questions, however, can lead either to misinterpretation of character data as adaptive information or to misinterpretation of frequency or distance data as diagnostic or historical information. Each of these misinterpretations will confound conservation programs. The character-based approach to delimiting phylogenetic species is both operationally and logically superior to "diagnostic" methods that involve distance- or frequency-based routines, which are unstable over time. Tree-based criteria for the diagnosis of conservation "units" are also inappropriate because they can depend on patterns inferred without reference to diagnostic characters. Intraspecific studies, conservation-related or otherwise, that adopt terminology and methods designed to infer nested hierarchic relationships confuse diagnosis with historical inferences by treating diagnoses as outcomes rather than as precursors to phylogeny reconstruction. A character-based diagnostic approach recognizes the analytical dichotomy between species hierarchies and population statistics and provides a framework for the understanding of each. No species concept, however, should be viewed as an absolute criterion for protecting populations, but as part of a framework from within which identification of protection and management goals can be achieved effectively and defensibly.     

Measuring the linkage between strategies on sustainability and institutional forces: an empirical study of Spanish universities

Policy documents are commonly identified as key outcomes that guide initiatives directed by senior university leaders towards sustainability through plans and policies. Many studies have called for a more integration of sustainability into universities. Nevertheless, the interest in sustainability issues has been more recent in the specific case of Spain. This study analyses the strategic plans developed by Spanish universities in the last decade with two different aims: first, we examine the extent to which Spanish universities are incorporating strategies on sustainability. The second goal evaluates whether the presence of strategies on sustainability in Spanish universities could be associated with coercive and mimetic pressures. Findings indicate the low presence of strategies on sustainability in Spanish universities. Moreover, the results seem to suggest that the presence of strategies on sustainability in Spanish universities could be linked with coercive and mimetic pressures emanating from the State performance funding for universities. The results indicate that universities usually incorporate practices and strategies on sustainability as a response of the pressure exerted by institutional forces, such as the funding systems of higher education institutions.     

Assessing local planning capacity to promote environmentally sustainable residential development

Smart growth and sustainability planning have, in recent years, become central issues in planning discourse. Scholars have argued that planning capacity at the local government level is critical for smart growth planning, and that planners have a fundamental role to play in advancing local and regional sustainability. In this paper, we investigate the extent to which local planning capacity enables communities to promote more sustainable, smart growth residential development. Based on a 2013 survey of 38 county and 53 municipal governments in the state of Wisconsin, USA, this study finds that the majority of the sample communities have permitted residential developments characterized as transit-oriented, New Urbanist, mixed use, infill developments, or conservation subdivisions as alternatives to low-density, automobile-dependent conventional developments. The study also finds that jurisdictions with higher planning capacities are more likely to overcome significant barriers to more sustainable residential development.     

Transfer of Graphene CVD to Surface of Low Density Polyethylene (LDPE) and Poly(butylene adipate-co-terephthalate) (PBAT) Films: Effect on Biodegradation Process

Here, the influence of graphene as a coating on the biodegradation process for two different polymers is investigated, poly(butylene adipate-co-terephthalate) (PBAT) (biodegradable) and low-density polyethylene (LDPE) (non-biodegradable). Chemical vapor deposition graphene was transferred to the surface of two types of polymers using the Direct Dry Transfer technique. Polymer films, coated and uncoated with graphene, were buried in a maturated soil for up to 180 days. The films were analyzed before and after exposure to microorganisms in order to obtain information about the integrity of the graphene (Raman Spectroscopy), the biodegradation mechanism of the polymer (molecular weight and loss of weight), and surface changes of the films (atomic force microscopy and contact angle). The results prove that the graphene coating acted as a material to control the biodegradation process the PBAT underwent, while the LDPE covered by graphene only had changes in the surface properties of the film due to the accumulation of solid particles. Polymer films coated with graphene may allow the production of a material that can control the microbiological degradation, opening new possibilities in biodegradable polymer packaging. Regarding the possibility of graphene functionalization, the coating can also be selective for specific microorganisms attached to the surface.