An investigation of adsorption at the air-water and soil-water interfaces for non-micellizing ethylene oxide-propylene oxide surfactants

Adsorption at the air–water interface and soil sorption from aqueous solution have been investigated for a group of ethylene oxide (EO)–propylene oxide (PO) block copolymeric surfactants. The group which have a common structural formula of EO_m PO_n EO_m is distinguished by the fact that they have large critical micelle concentration (CMC) values and therefore do not readily form micelles at common environmental concentrations and temperatures. Adsorption at the air–water interface is readily shown to be driven by the size of the hydrophobic PO block. The size of the reduction in surface tension produced by a common concentration of 10⁻⁵ mol dm⁻³ linearly increases with the size of the PO block as does the efficiency of adsorption at the air–water interface as measured by pC₂₀ – the negative logarithm of the surfactant concentration that produces a reduction in surface tension of 20 mN m⁻¹. Soil sorption data have also been captured for these compounds and the data are readily fitted to the Freundlich adsorption isotherm. However soil sorption is shown to be inversely related to the molecular mass of the molecules and appears to be related to the size of the hydrophilic EO blocks in the molecule.     

Genetic divergence between two morphologically similar varieties of the kuruma shrimp<Emphasis Type="Italic"> Penaeus japonicus</Emphasis>

The kuruma shrimp Penaeus japonicus is widely distributed throughout the Indo-West Pacific. Two morphologically similar varieties, I and II, are recognized from the South China Sea. The two varieties are characterized by different color banding patterns on the carapace, but there are no distinct differences in morphometric traits between them based on measurement of 13 characters. Sequence data and restriction profiles of the mitochondrial genes reveal that these two varieties represent distinct clades, with sequence divergences of about 1% (473 bp) in 16S rRNA, 6–7% (504 bp) in cytochrome oxidase I, and 16–19% (470 bp) in the control region. Analysis of amplified fragment length polymorphism confirms that the two varieties are genetically distinct. We also investigated the geographical distribution of the two varieties in the western Pacific by analyzing specimens collected from Japan and Singapore. Shrimps from Japan and Singapore have been found to belong to varieties I and II, respectively, suggesting that the two varieties have different geographical distribution. Phylogenetic study reveals that the two varieties are more closely related to each other than to the other phylogenetically related Penaeus species. Results from this study suggest the occurrence of two cryptic species in the kuruma shrimp P. japonicus.Communicated by M.S. Johnson, Crawley     

In vitro reproduction of the turbellarian<Emphasis Type="Italic"> Urastoma cyprinae</Emphasis> isolated from<Emphasis Type="Italic"> Mytilus galloprovincialis</Emphasis>

Urastoma cyprinae is a species infecting the gills of several marine bivalves. Although there is some literature on this turbellarian, its life cycle remains unknown. In our work we have demonstrated that reproduction of U. cyprinae can be completed out of its host. More than 50% of turbellarians isolated from mussels (Mytilus galloprovincialis) secreted and cemented a cocoon to the well bottom during the first 72 h of incubation in seawater (34 salinity) at 14°C. Oviposition started at days 1–18 (average 4.8 days) and occurred in most cases inside the protective cocoon. Each Urastoma laid an average of 2.9 egg capsules (range 1–10) and 3.9 embryos were developed inside each egg capsule (range 1–11). Hatching started at days 20–43 (average 24 days). An average of 12.8 juvenile forms (range 1–64) escaped from the cocoon after hatching. The free-swimming juveniles showed a positive phototactic response and survived about a month after hatching. On the basis of our results, we propose a life cycle for U. cyprinae involving a sexual maturation parasitic period in the bivalve gills and a reproduction period including cocoon secretion, egg laying, and hatching that is entirely completed in the external environment.Communicated by S.A. Poulet, Roscoff     

Assessment of aquatic plants in the reservoirs of AES-tietê and development of an integrated control model for the most important species

The general objective of this work was to develop a monitoring and management model for aquatic plants that could be used in reservoir cascades in Brazil, using the reservoirs of AES-Tietê as a study case. The investigations were carried out at the reservoirs of Barra-Bonita, Bariri, Ibitinga, Promiss?o, and Nova-Avanhandava, located in the Tietê River Basin; Agua Vermelha, located in the Grande River Basin; Caconde, Limoeiro, and Euclides da Cunha, which are part of the Pardo River Basin; and the Mogi-Gua?u reservoir, which belongs to the Mogi-Gua?u River basin. The main products of this work were: development of techniques using satellite-generated images for monitoring and planning aquatic plant control; planning and construction of a boat to move coating plant masses and an airboat equipped with a DGPS navigation and application flow control system. Results allowed to conclude that the occurrence of all types of aquatic plants is directly associated with sedimentation process and, consequently, with nutrient and light availability. Reservoirs placed at the beginning of cascades are more subject to sedimentation and occurrence of marginal, floating and emerged plants, and are the priority when it comes to controlling these plants, since they provide a supply of weeds for the other reservoirs. Reservoirs placed downstream show smaller amounts of water-suspended solids, with greater transmission of light and occurrence of submerged plants.     

Strategies for management of Sicyos polyacanthus Cogn. (Cucurbitaceae) in sugarcane crops of Tucumán, Argentina

Sicyos polyacanthus is one of the most important weed in sugarcane crops of Tucumán (Argentina). The objective of this work was to establish strategies that would decrease the weed incidence in the crop to a minimum level. The study was carried out during 1998--2003 at five localities of sugarcane production of Tucumán (Argentina). The plots were 20 m long (192 m2) with 6 furrows and each plot was replicated five times. Treatments were: (i) Mechanical-chemical cultivation without fire; (ii) Mechanical-chemical culltivation with fire; (iii) Mechanical cultivation with handle pulled and with fire; (iv) Mechanical cultivation with handle pulled without fire; (v) Mechanical and chemical variants with fertilization and without fertilization; (vi) Mechanical and chemical variants with watering and without watering; (vii) Fallow and rotation, at the sugarcane crop renovation; (viii) Mechanical and chemical variants for plant cane and ratoon cane; and (ix) Mulching of harvest rests. The results suggest that besides the use of preemergent herbicides, fire marks the entry point of control, influencing fluxes and seed viability. It appears that fallow, mulching, and rotation of crops is fundamental for eliminating seeds that live short time in the soil and increase the mortality rate of species.     

Selecting peptide ligands of microcystin-LR from phage displayed random libraries

In the present study, we investigated to find novel ligands for low molecular weight environmental toxin, microcystin-LR (MC-LR) by using phage display technology. Two random libraries, displaying linear 12-mer peptides and cyclic 7-mer peptides, were screened against the immobilized target respectively. After three rounds of panning, phage clones that recognized microcystin-LR specifically were obtained from both the linear and the constrained libraries, proved by enzyme-linked immumosorbent assays and immunoprecipitation assays. DNA sequencing indicated that peptides displayed on some of the selected clones shared consensus sequences. Compared with traditional methods, this approach provided a cheaper and more rapid alternative to screen specific ligands for microcystin-LR. Moreover, since it is rather difficult to take small molecules as targets of phage display libraries, the success of this experiment expanded the applications of phage display technology, and provided a new avenue to study environmental small molecular toxins.     

Model testing using data on 137Cs from Chernobyl fallout in the Iput River catchment area of Russia

Data collected for 10 years following the Chernobyl accident in 1986 have provided a unique opportunity to test the reliability of computer models for contamination of terrestrial and aquatic environments. The Iput River scenario was used by the Dose Reconstruction Working Group of the BIOMASS (Biosphere Modelling and Assessment Methods) programme. The test area was one of the most highly contaminated areas in Russia following the accident, with an average contamination density of 137Cs of 800,000 Bq m-2 and localized contamination up to 1,500,000 Bq m-2, and a variety of countermeasures that were implemented in the test area had to be considered in the modelling exercise. Difficulties encountered during the exercise included averaging of data to account for uneven contamination of the test area, simulating the downward migration and changes in bioavailability of 137Cs in soil, and modelling the effectiveness of countermeasures. The accuracy of model predictions is dependent at least in part on the experience and judgment of the participant in interpretation of input information, selection of parameter values, and treatment of uncertainties.     

The acetochlor registration partnership: prospective ground water monitoring program

The Acetochlor Registration Partnership conducted a prospective ground water (PGW) monitoring program to investigate acetochlor [2-chloro-N-(ethoxymethyl)-N-(2-ethyl-6-methylphenyl)-acetamide] transport to ground water at eight sites. The distribution of soil textures among these sites was weighted toward coarser soil types, while also including finer-textured soils that dominate most corn (Zea mays L.)-growing areas of the United States. Each site consisted of a 1.2-ha test plot adjacent to a 0.2-ha control plot. Suction lysimeters and monitoring wells were installed at multiple depths within each test and control plot to sample soil-pore water and near-surface ground water. Irrigation was applied to each site during the growing season to ensure water input of 110 to 200% of average historical rainfall. Acetochlor dissipated rapidly from surface soils at all sites with a DT(50) (time for 50% of the initial residues to dissipate) of only 3 to 9 d, but leaching was not an important loss mechanism, with only 0.25% of the 15,312 soil-pore water and ground water samples analyzed containing parent acetochlor at or above 0.05 microg L(-1). However, quantifiable residues of a soil degradation product, acetochlor ethanesulfonic acid, were more common, with approximately 16% of water samples containing concentrations at or above 1.0 microg L(-1). A second soil degradation product, acetochlor oxanilic acid, was present at concentrations at or above 1.0 microg L(-1) in only 0.15% of water samples analyzed. The acetochlor PGW program demonstrated that acetochlor lacks the potential to leach to ground water at detectable concentrations, and when applied in accordance with label restrictions, is unlikely to move to ground water at concentrations hazardous to human health.     

Extraction wells and biogas recovery modeling in sanitary landfills

A general methodology is established that permits the characterization and evaluation of the optimum potential of biogas extraction at each vertical well in the sanitary landfill of Asturias, Spain. Twenty wells were chosen from a total of 225 for the study, and the maximum production flow of biogas, which is a result of the degradation of the municipal solid waste deposited within its area of influence, was determined for each well. It was found that this flow varied with time and is characteristic of each extraction well. The maximum extractable flow also was determined as a function of the composition of the biogas needed for its subsequent utilization. The biogas extraction yield in the wells under study varied between approximately 26 and 97%, with a mean recovery value of 82%. The low yields found in certain cases were generally caused by a sealing defect, which leads to excessive incorporation of air into the landfill gas through the surrounding soil or through the extraction shaft, and which make its subsequent utilization difficult.     

Predictions of binary sorption isotherms for the sorption of heavy metals by pine bark using single isotherm data

The adsorption of three heavy metal ions by pine bark was studied. The study was divided into two parts; single component adsorption of the metals Cu2+, Cd2+ and Ni2+ and bisolute adsorption of the three binary systems Cu2+-Cd2+, Cu2+-Ni2+ and Cd2+-Ni2+. Extended Langmuir model, extended Freundlich model. Sips model and ideal adsorption solution theory (IAST) models were used to predict the equilibrium uptake for Cu2+, Cd2+ and Ni2+ in the binary diluted solutions using the single adsorption constants. The experimental data of single isotherm adsorption process were found to follow Langmuir isotherm model with less accuracy than Freundlich and Sips models. Whereas, the predictions of bisolute adsorption isotherms of the mentioned three systems, Cu2+-Cd2+, Cu2+-Ni2+ and Cd2+-Ni2+, showed good agreement with experimental data when using Extended-Langmuir, Extended-Freundlich and IAST. However, the only good fit of the Sips model was with the Cu2+-Cd2+ system.