Towards saving freshwater: halophytes as unconventional feedstuffs in livestock feed: a review

Water represents 71% of all earth area and about 97% of this water is salty water. So, only 3% of the overall world water quantity is freshwater. Human can benefit only from 1% of this water and the remaining 2% freeze at both poles of earth. Therefore, it is important to preserve the freshwater through increasing the plants consuming salty water. The future prosperity of feed resources in arid and semi-arid countries depends on economic use of alternative resources that have been marginalized for long periods of time, such as halophytic plants, which are one such potential future resource. Halophyte plants can grow in high salinity water and soil and to some extent during drought. The growth of these plants depends on the contact of the salted water with plant roots as in semi-desert saline water, mangrove swamps, marshes, and seashores. Halophyte plants need high levels of sodium chloride in the soil water for growth, and the soil water must also contain high levels of salts, as sodium hydroxide or magnesium sulfate. There are many uses for halophyte plants, including feed for animals, vegetables, drugs, sand dune stabilizers, wind shelter, soil cover, wetland cultivation, laundry detergents, and paper production. This paper will focus on the use of halophytes as a feed additive for animals. In spite of the good nutritional value of halophytes, some anti-nutritional factors as nitrates, nitrite complexes, tannins, glycosides, phenolic compounds, saponins, oxalates, and alkaloids may be present in some of them. The presence of such anti-nutritional agents makes halophytes unpalatable to animals, which tends to reduce feed intake and nutrient use. Therefore, the negative effects of these plants on animal performance are the only objection against using halophytes in animal feed diets. This review article highlights the beneficial impact of considering halophytes in animal feeding on saving freshwater and illustrates its nutritive value for livestock from different aspects.     

Minimizing irrigation water demand: An evaluation of shifting planting dates in Sri Lanka

Climate change coupled with increasing demands for water necessitates an improved understanding of the water–food nexus at a scale local enough to inform farmer adaptations. Such assessments are particularly important for nations with significant small-scale farming and high spatial variability in climate, such as Sri Lanka. By comparing historical patterns of irrigation water requirements (IWRs) to rice planting records, we estimate that shifting rice planting dates to earlier in the season could yield water savings of up to 6%. Our findings demonstrate the potential of low-cost adaptation strategies to help meet crop production demands in water-scarce environments. This local-scale assessment of IWRs in Sri Lanka highlights the value of using historical data to inform agricultural management of water resources when high-skilled forecasts are not available. Given national policies prioritizing in-country production and farmers’ sensitivities to water stress, decision-makers should consider local degrees of climate variability in institutional design of irrigation management structures.     

Integrating design thinking with sustainability science: a Research through Design approach

Design disciplines have a long history of creating well-integrated solutions to challenges which are complex, uncertain and contested by multiple stakeholders. Society faces similar challenges in implementing the Sustainable Development Goals, so design methods hold much potential. While principles of good design are well established, there has been limited integration of design thinking with sustainability science. To advance this integration, we examine the process of designing MetaMAP: an interactive graphic tool for collaborating to understand social–ecological systems and design well-integrated solutions. MetaMAP was created using Research through Design methods which integrate creative and scientific thinking. By applying design thinking, researchers and practitioners from different backgrounds undertook multiple cycles of problem framing, solution development, testing and reflection. The testing was highly collaborative involving over 150 people from diverse disciplines in workshops, case studies, interviews and critique. Reflecting on this process, we discuss design principles and opportunities for integrating design thinking with sustainability science to help achieve Sustainable Development Goals.     

Water Remediation: PVA-Based Magnetic Gels as Efficient Devices to Heavy Metal Removal

Scientific and technological researches are devoted to obtain materials capable of retaining different kinds of pollutants, contributing to contamination solutions. In this context, hydrogels have emerged as great candidates because of their excellent absorption properties as well as good mechanical, thermal and chemical properties. More specifically, ferrogels (magnetic gels) present the extra advantage of being easily manipulated by a permanent magnet. Here, we present the results derived from the application of ferrogels as efficient tools to extract heavy metal pollutants from wastewater samples. The gels were prepared following the method of freezing and thawing of a polyvinyl alcohol aqueous solution with magnetic nanoparticles coated with polyacrylic acid. Ferrogels were fully characterized and their ability to retain Cu²⁺ and Cd²⁺, as model heavy metals, was studied. Thus kinetics and mechanisms of adsorption were evaluated and modeled. The concentration of MNPs on the PVA matrix was key to improve the adsorption capability (approximately the double of retention is improved by the MNPs addition). The adsorption kinetics was determined as pseudo-second order model, whereas the Langmuir model was the most appropriate to explain the behavior of the gels. Finally reuse ability was evaluated to determine the real potential of these materials, the ferrogels demonstrated high efficiency up to about five cycles, retaining about 80–90% of their initial adsorption capability. All the results indicated that the materials are promising candidates able to compete with the commercial technology regarding to water remediation.     

Reproductive isolation in temperate reef fishes

Opportunity and recognition isolation can lead directly to reproductive isolation, the former via divergence in the location and timing of breeding, and the latter via differential mate preferences. We describe the potential significance of these factors in the maintenance of reproductive isolation in a clade of triplefin fishes that occur sympatrically around coastal New Zealand. Specifically, we investigate the roles of spawning time and nesting habitat in promoting opportunity isolation, and of interspecific variation in male body length and breeding colouration in promoting recognition isolation. The triplefin species investigated are reproductively active over several months and show high overlap in breeding times, thus rejecting temporal isolation as a mechanism. Differences in nesting habitats resulted in a reduced probability of encounter between some species, especially between sister-species pairs. Interspecific colour differences generally decreased during the reproductive period, and males of sister-species pairs showed no interspecific colour differences in the ultraviolet light spectrum, thus mate selection based on male colour patterns is unlikely to lead to premating isolation. Finally, males of closely related triplefin species differed in body length, a secondary sexual trait often involved in assortative mating. Thus, spatial differences in nesting habitats reduce the chances of encountering allospecific mates, which may facilitate opportunity isolation and differences in male length, possibly related to species-specific female selection on male body size, may lead to recognition isolation. The combination of limited spatial overlap in nesting habitat and differences in male body size may facilitate species assortative mating in sympatry or parapatry.     

Prolonged reproductive consequences of short-term biomass loss in seaweeds

This study describes the reproductive collapse of a large giant-kelp forest (Macrocystis pyrifera; Point Loma, southern California, USA) and the dynamics of its subsequent recovery. High-frequency sampling within a 100-m² area, combined with a 3-year reproduction time-series from four other sites over a broad depth gradient, were used to (1) quantify temporal and spatial patterns of change in size and fertility of adult sporophytes, and (2) examine physical and biological factors that regulate such changes. Giant-kelp sporophytes have the potential for continuous reproduction, yet from March to November 1999, sporophytes at the high-frequency sampling site went from completely sloughing (actively releasing zoospores) to completely sterile, despite a relatively constant biomass of sporogenous tissues. This shift to sterility was rapid, with 65% of sporophytes ceasing to slough during late-June/early-July 1999, and did not co-occur with stressful physical conditions (i.e. high temperatures, low nutrients, or high wave intensity). Instead, the cessation of reproductive output corresponded to an episodic, sublethal amphipod-grazing event that stripped blade biomass from all sporophytes. Although the grazer infestation affected the entire kelp forest, peaks in grazer abundance were localized, moving through the population during late spring and summer, and causing patchiness in sporophyte size and fertility on a scale of meters. The reproductive collapse was size-dependent, since smaller sporophytes were the first to cease sloughing. The grazing event waned in the fall and sporophyte vegetative growth rapidly recovered lost biomass (within ~2 months). Such growth, however, occurred at the expense of the production of sporogenous tissue and caused a prolonged period (>4 months) of decreased reproductive output. These results suggest a trade-off between sporophyte growth and reproduction, allowing short-term disturbances to have lasting impacts on the reproductive output of giant-kelp populations.     

The invasion and subsequent die-off of <Emphasis Type="Italic">Mytilus galloprovincialis</Emphasis> in Langebaan Lagoon,South Africa: effects on natural communities

The alien mussel Mytilus galloprovincialis invaded sand banks in Langebaan Lagoon on the west coast of South Africa in the mid-1990s. However, by 2001 these beds had completely died off, with only empty shells and anoxic sand remaining. In an effort to prevent the re-settlement of this aggressive invader, all dead mussel shells were then cleared. This study considered the impacts of the invasion and subsequent die-off on natural benthic communities. Community composition differed significantly between non-invaded and invaded areas (ANOSIM, R = 0.685 and P < 0.01) as the physical presence of mussel beds created a new habitat that promoted invasion by indigenous rocky-shore species. This dramatically increased faunal biomass from 1,132.9 g m⁻² ± 3,454.7 SD to 53,262.4 g m⁻² ± 23,052.6 SD and species richness from 38 to 49 species. Following the die-off of the mussel beds, communities remained significantly different between non-invaded areas and those in which mussel shells remained (ANOSIM, R = 0.663 and P < 0.01). Species richness was significantly greater in non-invaded areas (18 species) than in uncleared areas with remnant shells (four species) (Kruskal–Wallis ANOVA H _2,36 = 10.8964 and P = 0.032), as the previously dominant rocky-shore species became smothered by sediment and the compacted shells formed an impermeable layer excluding sandy-shore burrowing organisms. After the shells were cleared, 50% of the sandy-shore species associated with non-invaded areas returned within 5 months, but community structure still remained significantly different to non-invaded areas (ANOSIM, R = 0.235 and P > 0.05). Invasion thus dramatically altered natural communities and although the subsequent removal of the dead mussel shells appears to have aided recovery, community composition remained different from the pre-invasion state after 5 months.     

Slowest of the slow: latitudinal insensitivity of burrowing capacity in the bivalve <Emphasis Type="Italic">Laternula</Emphasis>

Low temperature limits the rate of biochemical reactions and aerobic scopes of cold water ectotherms. To compensate for this limiting effect, animals living in cold environments often possess physiological or morphological adaptations to maintain vital functions. Cross-latitudinal comparison of aerobic capacities is one method to test which factors constrain activity in thermally distinct environments particularly when congeneric studies are carried out on related species with conservative ecology and habitat. Burrowing is a major aerobic activity of bivalve molluscs that is described here for the first time for the tropical mangrove species Laternula truncata and Laternula boschasina and then compared with their Antarctic congener Laternula elliptica. About 80% of L. truncata (16.3–46.1 mm shell length) and 63% of L. boschasina (11.3–27.7 mm shell length) buried within 24 h at 28°C. The burrowing rate index (BRI = [³√wet weight/time to bury]×10⁴) ranged between 1.1 and 20.2 for L. boschasina and 1.1–32.9 for L. truncata. These values are 2–3 orders of magnitude less than other tropical bivalve molluscs and are amongst the lowest recorded for any bivalve. Comparisons with the Antarctic L. elliptica showed little or no differences in BRI (Q ₁₀ of 1.0–1.2 for specimens of the same size). This is contrary to the general pattern over a wide range of bivalves, where BRI increases with a Q ₁₀ of between 2.9 and 6.4 between high latitudes and the equator. L. elliptica has 25–30% longer relative foot length than tropical congeners of the same size, which could be a morphological adaptation compensating for reduced burrowing speeds in a colder environment. Burrowing rates within the genus Laternula could, however, also be maintained by differing habitat, ecological and physiological constraints on burrowing capability.     

Some quantitative aspects of seagrass ecology in a coastal lagoon of Mauritius

Seagrass distribution was recorded by snorkel dives on a grid of stations in the waterfront of Club Méditerranée at Mon Choisy-Trou Aux Biches lagoon (NW Mauritius) and subsequently mapped using SURFER 6 computer software. Above-ground (AG) and below-ground (BG) standing biomass in terms of dry weight (DW) and ash-free dry weight (AFDW) as well as shoot density and shoot length were monitored monthly from June1997 to May1998 in a mixed stand of Halodule uninervis and Syringodium isoetifolium (dominant) at a shallow, nearshore station in the lagoon. Measurements of physical and chemical parameters [water temperature, current speed, salinity, pH, dissolved oxygen (DO), nitrate and phosphate concentrations] were made simultaneously, as well as at a reference station (ORE) outside the coral reef. The bottom sediment was analysed for grain size and type composition. Variation patterns were examined and statistical correlations drawn to relate plant performance to the environmental variables measured. The SURFER 6 programme generated a satisfactory contour map of seagrass distribution in the lagoon with a cover range of 0-60%. The densest patches occurred adjacent to the shoreline experiencing weaker water currents (3-13 cm s^-1) rather than near the reef (5-35 cm s^-1), where seagrasses were absent. Sand (0.063-2 mm grain size) constituted 97.2% and 77.6% of the nearshore and near-reef sediment, respectively. The dominant grain types were derived from corals (about 80%) and mollusc shells (about 14%). The recorded range of total standing biomass for H. uninervis was 243.1-468.2 g DW m^-2 (326.9ᇛ.7 g) or 71.7-141.2 g AFDW m^-2 (96.8ᆨ.1 g) and for S. isoetifolium it was 271.7-758 g DW m^-2 (460.4끯.1 g) or 119-220.5 g AFDW m^-2 (155.1ᆮ.5 g), with a maximum biomass increase during September-December in both species. AG:BG biomass ratios were generally <1 and approximated 1 during the warmest months of December-February only. Mean shoot density (1,077-4,364 shoots m^-2 in the overall range of 998-4,428 shoots m^-2) and mean shoot length (10.9-20.8 cm in the overall range of 7-31 cm) in S. isoetifolium were higher than in H. uninervis (1,732-4,137 shoots m^-2 in the overall range of 1,522-4,327 shoots m^-2 and 7.9-13.7 cm in the overall range of 6-20 cm, respectively). Temperature showed strong positive correlations with total AFDW biomass of both species (r=0.755, P<0.01 for H. uninervis; r=0.679, P<0.02 for S. isoetifolium) and with DO (r=0.925, P<0.01). High DO levels (10.7-11.2 mg l^-1) coincided with optimum standing biomass at 27.2°C. Correlations were also strong with shoot density (r=0.881, P<0.01 for H. uninervis; r=0.952, P<0.01 for S. isoetifolium) and shoot length (r=0.752, P<0.01 for H. uninervis; r=0.797, P<0.01 for S. isoetifolium). Under optimal environmental conditions, nutrient inputs from surface run-off or underground freshwater seepage in the lagoon due to heavy rainfall may boost up seagrass biomass, as suggested by positive significant correlations between phosphate levels and AG AFDW biomass (r=0.63, P<0.05 for H. uninervis; r=0.65, P<0.05 for S. isoetifolium) and shoot density (r=0.6, P<0.05 for H. uninervis; r=0.687, P<0.02 for S. isoetifolium). The results generated in this study suggest local seagrass standing biomass is comparable to that reported in monospecific stands from elsewhere. Anthropogenic activities increasingly draw down the resilience of the seagrass beds around Mauritius, and preventative measures are indispensable to achieve coastal ecological stability.