Traffic-generated noise pollution: exposure of road users and populations in Metropolitan Kuwait

This study was carried out in metropolitan Kuwait with a sound level meter to assess peak hour and off-peak hour noise level. In local/collector streets, noise ranged between 56.0 to 79.2 dBA and 55.3 to 76.4 dBA; in arterial streets, 62.3 to 89.2 dBA and 59.6 to 78.9 dBA; and in freeways, 66.7 to 94.8 dBA and 64.9 to 89.1 dBA during peak and off-peak hour respectively. Values were higher than their prescribed standards which may pose a significant impact on quality of life. Findings of this research have shown that the level of traffic-generated noise pollution in Kuwait urban area is high enough to adversely affect the human health and well-being of its residents. Over 1,400 subjects responded to a randomly administered survey that assessed the physical health, personal well-being, and mental health. People residing in neighborhoods exposed to higher noise levels have significantly higher stress and noise annoyance levels and also adversely affected their sense of well-being. In the responder analysis, those people living in quiet neighborhoods had significantly higher mean scores in general health (35 points higher, p < 0.05), sense of vitality (30 points higher, p < 0.05), and mental health (20 points higher, p < 0.05) when compared to the other group. In addition, the component scores of stress and noise sensitivity for the participants living in quiet neighborhoods had significantly lower values (30 points lower and 59 points lower, respectively) than that of the participants living in noisy neighborhood. With the rapid expansion of the infrastructures in metropolitan Kuwait, it is virtually definite that traffic noise will shortly assume a dangerous dimension, and will be a ground of escalating fear for both the public and liable policy-makers. The quality of life in metropolitan Kuwait will certainly be negatively affected.     

Experimentally proved biosynthesis of vitamin C in a guinea pig

The Science of Nature -     

Seasonal occurrence of the yellow stem borer Scirpophaga incertulas (Walker) on deepwater rice in Bangladesh and Thailand

Deepwater rice is grown in South and Southeast Asia on 11 million hectares flooded deeply during the monsoon. Surveys for the incidence of stem borers in deepwater rice in Bangladesh from 1977 to 1980, and in Thailand during 1981 and 1982, showed that borer incidence and species composition were remarkably similar. Scirpophaga incertulas (Walker) usually comprised more than 90% of the borer population and was almost exclusively present during the main flooding period. Chilo polychrysus (Meyr.) comprised 11% and Sesamia inferens (Walker) 6% of the population in the pre-flood and ripening stages.Low borer activity in the early part of the season was explained by a low nucleus population, the synchronous planting of deepwater rice, and severe moisture stress and high temperatures in the pre-flood period. In Bangladesh, a severe drought in 1979 limited Scirpophaga incertulas populations to unusually low levels until the flowering stage. In Thailand, drier conditions, the lack of an intervening rice crop in the dry season and a longer pre-flood period, appeared to severely restrict early season borer activity. The onset of flooding and stem elongation provided a more favourable environment for S. incertulas. Borer activity increased steadily during the first 3–4 months of flooding, to average 23% damaged stems (26 m^?2) and 13 borer immature stages/100 stems (13 m^?2) by the flowering stage. Borer activity continued at about the same level as the water receded, to reach maximum annual levels of 38–44% damaged stems (35 m^?2) at the late-ripening stage. At harvest, 60% of the fields were at outbreak level (>40% damaged stems). Such high levels of damage are explained by the long growth period of deepwater rice, favourable weather during the flooding period, and the optimum habitat of the elongated stem. S. incertulas populations then crashed to low levels; the larvae entering diapause in the field stubble. Although related to actual damage, the deadheart and whitehead symptoms grossly under-estimated the extent of stem damage.     

Water Management Applications for Satellite Precipitation Products: Synthesis and Recommendations

This article is an assessment of the current state of the art and relative utility of satellite precipitation products (SPPs) for hydrologic applications to support water management decisions. We present a review of SPPs, their accuracy in diverse settings including the influence of geography, topography, and weather systems, as well as the pros and cons of their use for different water management applications. At the end of this broad synthesizing effort, recommendations are proposed for: (1) SPP developers to improve the quality, usability, and relevance of precipitation products; and (2) SPP users to improve the reliability of their predictions and hydrologic applications to better support water management.     

A Recourse‐Based Interval Fuzzy Programming Model for Point‐Nonpoint Source Effluent Trading under Uncertainty

In this study, a recourse‐based interval fuzzy programming (RIFP) model is developed for tackling uncertainties expressed as fuzzy, interval, and/or probabilistic forms in an effluent trading program. It can incorporate preregulated water‐pollution control policies directly into its optimization process, such that an effective linkage between environmental regulations and economic implications (i.e., penalties) caused by improper policies due to uncertainty existence can be provided. The RIFP model is applied to point‐nonpoint source effluent trading of the Xiangxi River in China. The efficiency of trading efforts between water quality improvement and net system benefit under different degrees of satisfying discharge limits is analyzed. The results are able to help support (1) formulation of water‐pollution control strategies under various economic objectives and system‐reliability constraints, (2) selection of the desired effluent trading pattern for point and nonpoint sources, and (3) generation of tradeoffs among system benefit, satisfaction degree, and pollutant mitigation under multiple uncertainties. Compared with the traditional regulatory approaches, the results demonstrate that the water‐pollution control program can be performed more cost‐effectively through trading than nontrading.     

Adsorption-desorption characteristics of mercury in paddy soils of China

Mercury (Hg) has received considerable attention because of its association with various human health problems. Adsorption-desorption behavior of Hg at contaminated levels in two paddy soils was investigated. The two representative soils for rice production in China, locally referred to as a yellowish red soil (YRS) and silty loam soil (SLS) and classified as Gleyi-Stagnic Anthrosols in FAO/UNESCO nomenclature, were respectively collected from Jiaxin County and Xiasha District of Hangzhou City, Zhejiang Province. The YRS adsorbed more Hg(2+) than the SLS. The characteristics of Hg adsorption could be described by the simple Langmuir adsorption equation (r2 = 0.999 and 0.999, P < 0.01, respectively, for the SLS and YRS). The maximum adsorption values (Xm) that were obtained from the simple Langmuir model were 111 and 213 mg Hg(2+) kg(-1) soil, respectively, for the SLS and YRS. Adsorption of Hg(2+) decreased soil pH by 0.75 unit for the SLS soil and 0.91 unit for the YRS soil at the highest loading. The distribution coefficient (kd) of Hg in the soil decreased exponentially with increasing Hg(2+) loading. After five successive desorptions with 0.01 mol L(-1) KCl solution (pH 5.4), 0 to 24.4% of the total adsorbed Hg(2+) in the SLS soil was desorbed and the corresponding value of the YRS soil was 0 to 14.4%, indicating that the SLS soil had a lower affinity for Hg(2+) than the YRS soil at the same Hg(2+) loading. Different mechanisms are likely involved in Hg(2+) adsorption-desorption at different levels of Hg(2+) loading and between the two soils.     

Assessing local planning capacity to promote environmentally sustainable residential development

Smart growth and sustainability planning have, in recent years, become central issues in planning discourse. Scholars have argued that planning capacity at the local government level is critical for smart growth planning, and that planners have a fundamental role to play in advancing local and regional sustainability. In this paper, we investigate the extent to which local planning capacity enables communities to promote more sustainable, smart growth residential development. Based on a 2013 survey of 38 county and 53 municipal governments in the state of Wisconsin, USA, this study finds that the majority of the sample communities have permitted residential developments characterized as transit-oriented, New Urbanist, mixed use, infill developments, or conservation subdivisions as alternatives to low-density, automobile-dependent conventional developments. The study also finds that jurisdictions with higher planning capacities are more likely to overcome significant barriers to more sustainable residential development.     

Pyrolysis of permethrin and formation of precursors of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) under non-oxidative conditions

This article reports the computational and experimental results of the thermal decomposition of permethrin, a potential source of dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF). We have performed a quantum chemical analysis by applying density functional theory to obtain the decomposition pathways of permethrin and the formation mechanism of dibenzofuran. We have conducted the pyrolysis experiments in a tubular reactor and identified the pyrolysis products to demonstrate the agreement between the experimental measurements and quantum chemical calculations. The initiation of the decomposition of permethrin involves principally the aromatisation of permethrin into 3-phenoxyphenylacetic acid, 2-methylphenyl ester (J) and concomitant loss of 2HCl. This rearrangement is followed by the rupture of the O–CH₂ linkage in J, with a rate constant derived from the quantum chemical results of 1 × 10¹⁵ exp(−68 kcal/mol/RT) s⁻¹ for temperatures between 700 and 1300 K. This is confirmed by finding that the rate constant for unimolecular rearrangement of permethrin into J is 1.2 × 10¹² exp(−53 kcal/mol/RT) s⁻¹ over the same range of temperatures and exceeds the direct fission rate constant at all temperatures up to 850 ± 120 °C as well as by the experimental detection of J prior to the detection of the initial products incorporating diphenyl ether, 1-methyl-3-phenoxybenzene, 3-phenoxybenzaldehyde and 1-chloromethyl-3-phenoxybenzene. As the temperature increases, we observe a rise in secondary products formed directly or indirectly (via phenol/phenoxy) including aromatics (naphthalene), biphenyls (biphenyl, 4-methyl-1,1′-biphenyl) and dibenzofuran (DF). In particular, we discover by means of quantum chemistry a direct route from 2-phenoxyphenoxy to naphthalene. We detect no polychlorinated dibenzo-p-dioxins and dibenzofurans. Unlike the case of oxidative pyrolysis [Tame, N.W., Dlugogorski, B.Z., Kennedy, E.M., 2007b. Formation of dioxins in fires of arsenic-free treated wood: Role of organic preservatives. Environ. Sci. Technol. 41, 6425–6432] where significant yields of both PCDD and PCDF were obtained, under non-oxidative conditions the thermal decomposition of permethrin does not form appreciable amounts of PCDD or PCDF and the presence of oxygen (and/or a sizable radical pool) appears necessary for the formation of dibenzo-p-dioxin itself or PCDD/F from phenol/phenoxy.     

Zinc and cadmium accumulation and tolerance in populations of Sedum alfredii

To investigate the variation of Zn and Cd accumulation and tolerance of Sedum alfredii (a newly reported Zn/Cd hyperaccumulator), field surveys and hydroponic experiments were conducted among three populations of this species: two originating from old Pb/Zn mines in Zhejiang (ZJ) and Hunan (HN) Provinces and one from a "clean" site in Guangdong (GD) Province, China. Under field conditions, up to 12,524 and 12,253 mg kg(-1) Zn, and 1400 and 97 mg kg(-1) Cd in shoots of ZJ and HN plants were recorded respectively. Under hydroponic conditions, ZJ and HN plants accumulated significantly higher Zn and Cd in their leaves and stems, and possessed significantly higher Zn and Cd tolerance than GD plants. Among the two contaminated populations, ZJ plants showed higher Cd tolerance and accumulation (in leaves) than HN plants. The present results indicate that significant differences in Zn and Cd accumulation and tolerance exist in populations of S. alfredii.     

Gas chromatographic methods for monitoring of wastewater chlorophenol degradation in anaerobic reactors

Wastewater samples from an anaerobic reactor were extracted with hexane and derivatized with diazomethane (method 1) and with acetic anidride (method 2). Gas chromatography with electron-capture detection (ECD) was employed for separating the parent compound and intermediates trichlorophenols (TCP) and dichlorophenols (DCP) which originated from the penta chlorophenol (PCP) degradation process. The relations between concentrations of PCP, TCP and DCP areas were linear in the range of concentrations of 0.2 to 8 mg/L and 0.025 mg/L to 5 mg/L for methods 1 and 2, respectively. The repeatability of the extraction methods was satisfactory, with variation coefficients lower than 11%. For method 1, at the fortification level of 0.2 mg/L, recovery of PCP, TCP, and DCP was 112%, 74% and 45%, respectively. For method 2, the corresponding recovery values at the fortification level of 0.1 mg/L were 91%, 93% and 103%, respectively. Storage of the frozen samples did not alter their PCP determination properties. The chromatographic methods adapted for chlorophenol determination in wastewater were suitable with relatively simple manipulation techniques. The obtained results were reproducible and allowed identification of intermediates formed during the PCP degradation process.