Irrigation suitability of White River in Indiana,Midwestern USA

Climate change models consistently project future precipitation reduction and temperature increase during the crop growing season in the US Midwest, which may exacerbate surface water scarcity issues confronting regional agriculture. To maintain consistent crop yields under the risk of increased droughts, farmers may shift from rain-fed agriculture to irrigation agriculture, particularly during drought periods. There is an urgent need to understand whether surface water in the Midwest is suitable for irrigation. In this study, irrigation water quality was comprehensively analyzed for commonly used parameters regarding salt content including sodium adsorption ratio (SAR), adjusted sodium adsorption ratio (SAR_adj), soluble sodium percentage (SSP), electrical conductivity (EC), total dissolved solids (TDS), residual sodium bicarbonate (RSBC), magnesium adsorption ratio (MAR), permeability index (PI), Kelley’s ratio (KR), synthetic harmful coefficient (SHC), and salinity. Results indicate that water in the White River at Muncie was rated mostly in excellent to good condition with regard to irrigation quality. However, the irrigation suitability level exhibited two distinct patterns between May–July and August–October. Specifically, an average of 7.8% of the samples from May to July were unsuitable for irrigation, and an average of 24.5% of samples from August to October were unsuitable for irrigation considering all parameters. Flow rate change over time and the release of pollutants from wastewater treatment plants and combine sewage outflows to the White River impacted on the irrigation water quality variations of the river. This study showed that there are higher risks during the fall season for farmers to use surface water as an irrigation source, and this risk might be greater if extended or more frequent drought events occur in the future. To our best knowledge, this is the first peer-reviewed study on irrigation water quality assessment in the Midwest and provides useful information for farmers and decision makers to consider while formulating applications for irrigation.

     

Use of membrane collectors in electrostatic precipitators.

Membrane collection surfaces, developed and patented by researchers at Ohio University, were used to replace steel plates in a dry electrostatic precipitator (ESP). Such replacement facilitates tension-based rapping, which shears the adhered particle layer from the collector surface more effectively than hammer-based rapping. Tests were performed to measure the collection efficiency of the membranes and to quantify the potential improvements of this novel cleaning technique with respect to re-entrainment. Results indicate that even semiconductor materials (e.g., carbon fibers) collect ash nearly as efficiently as steel plates, potentially indicating that collection surface resistivity is primarily dictated by the accumulated ash layer and not by the underlying plate conductivity. In addition, virtually all sheared particles separated from the collecting membranes fell within the boundary layer of the membrane, indicating extremely low potential for re-entrainment.     

Levels of Selected Metals in Canned Fish Consumed in Kingdom of Saudi Arabia

In the present paper, seven heavy metals (Pb, Cd, Ni, Cu, Zn, Cr and Fe) in canned salmon, sardine and tuna fish were determined by using atomic absorption spectroscopy. Cadmium and lead levels were determined by graphite tube AAS whereas Ni, Cu, Cr and Fe were determined by flame AAS. Analytical results were validated by spiking the samples with various concentrations of these metals for recovery. The metal contents, expressed in μg/g, wet weight, varied depending upon the specie studied. The levels of Pb ranged from 0.03–1.20 μg-g⁻¹ with an average of 0.313 μg-g⁻¹ for salmon; 0.03–0.51 μg-g⁻¹ with an average of 0.233 μg-g⁻¹ for tuna and 0.13–1.97 μg-g⁻¹ with an average of 0.835 μg-g⁻¹ for sardines. The levels of Cd ranged from 0.02–0.38 μg-g⁻¹ with an average of 0.161 μg-g⁻¹ for salmon; 0.07–0.64 μg-g⁻¹ with an average of 0.227 μg-g⁻¹ for tuna and 0.010–0.690 μg-g⁻¹ with an average of 0.183 μg-g⁻¹ for sardines. Comparative evaluation of these metals in three varieties of fish showed that average concentration of lead in sardines is about 4 times and Ni about 3 times higher as compared to tuna. Generally, the levels of these metals follow the order sardine > salmon > tuna. The data generated in the present study compared well with the similar studies carried out in different parts of the world. The results indicate that canned fish, in general and tuna in particular, have concentrations within permissible limits of WHO/FAO levels for these heavy metals. Therefore, their contribution to the total body burden of these metals can be considered as negligibly small.     

Addressing sustainability through waste management: a perspective from higher education institutions in Southeast Asia

Journal of Material Cycles and Waste Management - Waste management is vital for global sustainable development. Sustainable development goals of a country would not be achieved if the waste...     

The dirty energy dilemma via financial development and economic globalization in Pakistan: new evidence from asymmetric dynamic effects

Environmental Science and Pollution Research - Energy strategy has been an essential strand in the view of economists in achieving rapid development process of any country. The recent wave of...     

Organochlorine,PCB, PAH,and metal concentrations in eggs of loggerhead sea turtles (Caretta caretta) from northwest Florida,USA

Abstract

Composite samples of unhatched and physically unaltered loggerhead sea turtle, Caretta caretta, eggs collected from 20 nests along northwest Florida were analyzed for organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), and metals. Chemical analyses revealed that turtle eggs contained detectable amounts of metals, PAHs, and PCBs. Only one OCP, p, p'‐DDD, was detected, and its presence was restricted to eggs from two nesting sites. None of the PCB concentrations exceeded the Food and Drug Administration's (FDA) action limit. Concentrations of dioxin‐like PCB congeners, 105, 118, and 126, and total PCBs were also detected and are contributors to the toxic burden of loggerhead sea turtle eggs. Concentrations of PAHs, 1,2,5,6‐dibenzanthracene, 1‐methyl naphthalene, Cl‐naphthalene and naphthalene were variable at nesting sites. Comparison of mean metal burdens in eggs from different beaches suggested that no uniform geographic gradients exist. Presence of OCPs, PCBs, PAHs and metals and their additive or synergistic toxicity is a concern to loggerhead sea turtle eggs; however, additive or synergistic impacts for loggerhead sea turtles are largely undocumented.     

Integration of novel hybrid composite discharge electrode with semi-pilot novel cross-flow electrostatic precipitator

ABSTRACT

Wet electrostatic precipitators (WESPs) are modern-era pollution control systems specifically designed to capture ultrafine particles as well as acid mist, highly resistive and sticky particles; however, this requires the use of expensive corrosion-resistant metal alloys. The work presented here is part of a continuing study at Ohio University aimed at reducing the cost of WESPs by using a novel combination of a polymer collector surfaces with a hybrid composite discharge electrode. In this study, a hybrid composite discharge electrode was tested, for the first time, inside a semi-pilot-scale experimental setup, with collection surfaces consists of a vertical array of strands. Particle laden gases were passed through this array of polymer ropes, which were kept wet by a small flow of water. The discharge electrodes were composite laminates of carbon fibers in a polymer matrix enclosing a metal mesh. The preliminary results showed that this new integrated system of composite discharge electrode and polymer collector surfaces can match or exceed the performance of a conventional metal alloy electrostatic precipitator (ESP) with metal discharge electrodes. There are additional advantages due to the system being compact, lightweight, and highly corrosion resistant.

Implications: This study focused on integrating and assessing performance of a novel hybrid composite electrode (HCE) inside semi-pilot novel cross-flow electrostatic precipitator at conditions typically observed in coal-fired power plant exhausts. The results were collected for particulate collection efficiencies and were compared with a rigid metal electrode. The HCE outperformed metal electrode by showing higher particulate collection efficiency. This result showcases substantial potential for these two new technologies (HCE and cross-flow system) as a substitute for conventional metal based wet ESPs.     

Switching behaviors toward green brands: evidence from emerging economy

The aim of the current research was to recognize consumer attitude gap toward green brand by studying role of green consumer value and green brand equity toward the switching intention and purchase intention of consumers toward green brands. The current research employed quantitative research design and collected data through questionnaire from 331 respondents. The PLS-structural equation modeling was employed to analyze the structured relationships. The findings suggest green customer value is product of the three important factors namely green brand experiential risk, green brand experiential quality and green brand experience. Hence, these act as the main drivers of switching consumer behavioral intention toward the green products through consumer green brand equity. The research attempts to study the attitude–behavior gap in the green marketing literature by investigating the role which includes, green brand experiential risk, green brand experiential quality and green brand experience on customer value leading to green brand equity. The research provide an in-depth understating of attitude–behavior gaps and role of green customer value and brand equity that plays vital role in marketing campaigns and policy making to increase purchase intention of green eco-conscious products.

     

Genetic polymorphisms in XRCC1, OGG1, and XRCC3 DNA repair genes and DNA damage in radiotherapy workers

DNA damage may develop at any dose of ionizing radiation. DNA damage activates pathways that regulate cell growth and division or coordinate its replication and repair. The repair pathways, base excision repair (BER) and single-strand break repair (SSBR), can repair such damages efficiently and maintain genome integrity. Loss of this repair process or alteration of its control will be associated with serious outcomes for cells and individuals. This study aimed to determine the relationship between XRCC1 (Arg194Trp, Arg280His, and Arg399Gln), OGG1 (Ser326Cys), and XRCC3 (Thr241Met) SNPs and DNA damage and to identify high-risk individuals with reduced DNA repair capacity. This case-control study was conducted on 80 subjects; 50 subjects working in Clinical Oncology and Nuclear Medicine Department in Assiut University Hospital along with 30 controls. A total of 1 mL blood samples were collected for Single-Cell Gel Electrophoresis Technique (Comet Assay) for detection of DNA damage in those subjects. A total of 3 mL fresh blood samples were collected and analyzed by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP)–based technique. DNA damage detected by comet test was significantly high in IR-exposed workers than control. Statistically high significant difference was found in exposed subjects versus control subjects regarding the frequencies of the variant alleles of hOGG1³²⁶, XRCC1^{280 & 399}, and XRCC3²⁴¹. The level of DNA damage was not affected by OGG1³²⁶ SNPs when comparing subjects of wild genotype with those of (pooled) variants either in the exposed staff or in the control group while XRCC1^{280, 399} and XRCC3²⁴¹ variant alleles had an influence on the studied DNA damage biomarker. Moreover, genotyping distribution pattern was highly variable in relation to gender. The present study indicated a relationship between DNA damage detected by comet test and single nucleotide polymorphisms in genes coding for DNA certain repair enzymes. Individuals occupationally exposed to low doses of ionizing radiation could be at great risk and more susceptible to the increased DNA damage if they have inherited genetic polymorphism.

     

Feasibility of the hydrogen sulfide test for the assessment of drinking water quality in post-earthquake Haiti

In 2010, a magnitude 7.0 earthquake struck Haiti, severely damaging the drinking and wastewater infrastructure and leaving millions homeless. Compounding this problem, the introduction of Vibrio cholerae resulted in a massive cholera outbreak that infected over 700,000 people and threatened the safety of Haiti’s drinking water. To mitigate this public health crisis, non-government organizations installed thousands of wells to provide communities with safe drinking water. However, despite increased access, Haiti currently lacks the monitoring capacity to assure the microbial safety of any of its water resources. For these reasons, this study was designed to assess the feasibility of using a simple, low-cost method to detect indicators of fecal contamination of drinking water that could be implemented at the community level. Water samples from 358 sources of drinking water in the Léogâne flood basin were screened with a commercially available hydrogen sulfide test and a standard membrane method for the enumeration of thermotolerant coliforms. When compared with the gold standard method, the hydrogen sulfide test had a sensitivity of 65 % and a specificity of 93 %. While the sensitivity of the assay increased at higher fecal coliform concentrations, it never exceeded 88 %, even with fecal coliform concentrations greater than 100 colony-forming units per 100 ml. While its simplicity makes the hydrogen sulfide test attractive for assessing water quality in low-resource settings, the low sensitivity raises concerns about its use as the sole indicator of the presence or absence of fecal coliforms in individual or community water sources.