Thermodynamic and kinetic studies of As(V) removal from water by zirconium oxide-coated marine sand

Arsenic contamination of groundwater is a major threat to human beings globally. Among various methods available for arsenic removal, adsorption is fast, inexpensive, selective, accurate, reproducible and eco-friendly in nature. The present paper describes removal of arsenate from water on zirconium oxide-coated sand (novel adsorbent). In the present work, zirconium oxide-coated sand was prepared and characterised by infrared and X-ray diffraction techniques. Batch experiments were performed to optimise different adsorption parameters such as initial arsenate concentration (100–1,000 μg/L), dose (1–8 g/L), pH of the solution (2–14), contact time (15–150 min.), and temperature (20, 30, 35 and 40 °C). The experimental data were analysed by Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherm models. Furthermore, thermodynamic and kinetic parameters were evaluated to know the mode of adsorption between ZrOCMS and As(V). The maximum removal of arsenic, 97 %, was achieved at initial arsenic concentration of 200 μg/L, after 75 min at dosage of 5.0 g/L, pH?7.0 and 27?±?2 °C. For 600 μg/L concentration, the maximum Langmuir monolayer adsorption capacity was found to be 270 μg/g at 35 °C. Kinetic modelling data indicated that adsorption process followed pseudo-second-order kinetics. The mechanism is controlled by liquid film diffusion model. Thermodynamic parameter, ΔH°, was ?57.782, while the values of ΔG° were ?9.460, ?12.183, ?13.343 and ?13.905 kJ/mol at 20, 30, 35 and 40 °C, respectively, suggesting exothermic and spontaneous nature of the process. The change in entropy, ΔS°?=??0.23 kJ/mol indicated that the entropy decreased due to adsorption of arsenate ion onto the solid adsorbent. The results indicated that the reported zirconium oxide-coated marine sand (ZrOCMS) was good adsorbent with 97 % removal capacity at 200 μg/L concentration. It is interesting to note that the permissible limit of arsenic as per World Health Organization is 10 μg/L, and in real situation, this low concentration can be achieved through this adsorbent. Besides, the adsorption capacity showed that this adsorbent may be used for the removal of arsenic from any natural water resource.     

An improved method to study the impact of pesticide sprays on small song birds

Abstract

Four test groups of small songbirds (Zebra Finch, Poephila guttata) were sprayed in a chamber with varying concentrations of fenitrothion. Exposure levels were assessed by monitoring air concentrations, deposits of the active ingredient (AI) on glass plates and droplets/cm² on Kromekote® cards. All indices of exposure were linearly correlated and the mean AI deposit on glass plates for the four groups tested were equivalent to 38, 51, 139 and 255 g/ha or 14%, 18%, 50% and 91% of the highest permissible emitted rate for broadscale forest spraying in Canada. Significant depression in body weights and brain acetylcholinesterase levels were noted only for the highest exposure group. Fenitrothion residues in blood were detectable only at the highest exposure level, and in liver at the two higher levels. Carcass and feather residues were much higher than those in blood and liver, and were detectable at all exposure levels but the residues did not increase linearly with exposure. For one of the spray groups, we were able to compute an equivalent acute oral dose based on matching acetylcholinesterase inhibition.     

Screening and detection of biomarkers in chickpea plants exposed to chromium and cadmium

A broad screening protocol, covering the most general phytochemical groups of compounds, was developed on the basis of high performance thin layer chromatography (HPTLC). A total of six TLC systems, comprising three derivatization reagents, two stationary phases and two mobile phases, were included. The screening method was applied for the identification of biomarkers in the chickpea plant exposed to cadmium and chromium. The biomarkers were selected on the basis of significant changes (0.26-4.6 fold) in concentration levels of phytochemicals. Totally, five different amino acids, three organic acids, one sulphur containing compound and one sugar were identified as biomarkers in chickpea exposed heavy metal.     

Wastewater quality of natural gas fertilizer factory, Fenchuganj and water quality of Kushiara River at the down stream

The physical, chemical and biological characteristics of the wastewater of Natural Gas Fertilizer Factory Ltd. Fenchuganj, Sylhet were determined through extensive laboratory tests in the months of March, July, October and December of the year 2005. Concentration of Suspended Solids was within the range of 445 to 950 mg/L. Bangladesh Industrial Effluent Standards for Suspended Solids is 100 mg/L. Suspended Solids were found above the limit in all the samples. Concentration of Dissolved Solids was found to vary from 576 to 1,456 mg/L. Bangladesh Industrial Effluent Standards, for Dissolved Solids is 2,100 mg/L. Dissolved Solids were found within the limit. Concentration of BOD(5) was found to vary from 4.5 to 8.4 mg/L. Bangladesh Industrial Effluent Standards for BOD(5) is 50 mg/L. For the year 2005, the BOD(5) was found below the limit in all the samples. Dissolved Oxygen of the wastewater was found to be between 2.0 to 3.0 mg/L, which do not satisfy the standard (4.5-8 mg/L). Oil and grease concentration were found in the range of 28 to 68 mg/L, whereas the standard is 10 mg/L for discharge into the inland surface water. In 2005, concentration of Cr(+ 6) was found to vary from 0.01 to 0.156 mg/L in the wastewater. Bangladesh Industrial Effluent Standards, for Cr(+6) is 0.1 mg/L. The concentration of chromium was found above the limit in three samples. Concentration of NO(3) was found to vary from 4.5 to 15.2 mg/L in the wastewater. Bangladesh Industrial Effluent Standards for nitrate is 10 mg/L. The nitrate was found above the limit in three samples. Maximum concentration of ammonia in lagoon 1 was found 1,710 mg/L in month of December. Bangladesh Industrial Effluent Standards for ammonia nitrogen is 100 mg/L. For the year 2005, the ammonia nitrogen was found above the limit in all samples.     

Gasification characteristics of biomass for tar removal by secondary oxidant injection

Gasification experiments for sawdust were conducted using a fixed bed reactor at 900 °C by varying the secondary oxidant injection ratio to determine the optimal conditions for tar removal along with the enhancement of gasification efficiency. Secondary oxidant was injected as an oxidant at the top zone of the gasifier in varying ratios of 10–30% of the total amount of oxidant. This method was based on the primary method of tar removal and gasification efficiency improvement by thermal cracking of tar. Various gasification performance parameters were evaluated and tar content was estimated by measuring the fluctuation of weight of the activated carbon filter. The results showed that the concentration of tar in the producer gas decreased by injecting the secondary oxidant, even though syngas yield decreased. The recycling potential of the char produced in the gasification experiments was also assessed with the purpose of utilizing char as an adsorbent by determining its surface area and pore volume. The results demonstrated that the char produced from the gasification experiment had similar quality to that of the activated carbon used in this experiment.     

Utilization of Cellulosic Wastes in Textile and Garment Industries: 2. Synthesis and Characterization of Cellulose Acetate from Knitted Rag

Cellulose acetate (CA) was synthesized from knitted rag, a cellulosic waste of Textile and Garment industries, in the glacial acetic acid, and subsequently acetic anhydride (Ac₂O) in presence of concentrated H₂SO₄ reaction medium. A low to high substitution products were obtained from single step up to seven steps acetylation of cellulose. In this way, it was possible to produce low cost and different grades or substituted acetylation derivatives of cellulose. The synthesized CA was characterized and investigation of its physical characteristics was done. Solubility, acetyl content, acetic acid content, degree of substitution, and molecular weight of CA increased gradually with the increase of the number of reaction steps attaining optimum value at the fourth step. The acetyl and acetic acid content of CA were increased from 39.95 % to 44.25 %, and from 55.73 % to 61.73 % respectively. Similarly, degree of substitution and molecular weight of CA were increased from 2.47 to 2.94, and from 74,249 to 121,437 respectively.     

Study of two species prey-predator model in imprecise environment with MSY policy under different harvesting scenario

Parameters involve in various ecological models are mostly uncertain due to ever changing characteristic of nature. This article, deals with a basic predator–prey model where ecological parameters are considered as parametric-functional nature of interval numbers. The dynamical behaviors of the model system have been discussed in the imprecise environment. Moreover, the concept of maximum sustainable yield (MSY) has been incorporated in the model system under imprecise environment, and MSY policies under different harvesting scenarios have been discussed. Finally all the analytical findings are testified through extensive numerical simulations and the article ended with a conclusion.

     

Generation, storage, collection and transportation of municipal solid waste--a case study in the city of Kathmandu, capital of Nepal

Solid waste management (SWM) services have consistently failed to keep up with the vast amount of solid waste produced in urban areas. There is not currently an efficient system in place for the management, storage, collection, and transportation of solid waste. Kathmandu City, an important urban center of South Asia, is no exception. In Kathmandu Metropolitan City, solid waste generation is predicted to be 1091 m(3)/d (245 tons/day) and 1155 m(3)/d (260 tons/day) for the years 2005 and 2006, respectively. The majority (89%) of households in Kathmandu Metropolitan City are willing to segregate the organic and non-organic portions of their waste. Overall collection efficiency was 94% in 2003. An increase in waste collection occurred due to private sector involvement, the shutdown of the second transfer station near the airport due to local protest, a lack of funding to maintain trucks/equipment, a huge increase in plastic waste, and the willingness of people to separate their waste into separate bins. Despite a substantial increase in total expenditure, no additional investments were made to the existing development plan to introduce a modern disposal system due to insufficient funding. Due to the lack of a proper lining, raw solid waste from the existing dumping site comes in contact with river water directly, causing severe river contamination and deteriorating the quality of the water.     

Cadmium contamination in agricultural soils of Bangladesh and management by application of organic amendments: evaluation of field assessment and pot experiments

Environmental Geochemistry and Health - In recent years, cadmium (Cd) contamination in agricultural soils and its subsequent transfer to crops is one of the high-priority environmental and public...