Kinetic adsorption of application of carbon nanotubes for Pb（II） removal from aqueous solution

The capability of carbon nanotubes (CNTs) to adsorb lead (Pb) in aqueous solution was investigated. Batch mode adsorption experiment was conducted to determine the effects of pH, agitation speed, CNTs dosage and contact time. The removal of Pb(II) was reach to maximum value 85% or 83% at pH 5 or 40 mg/L of CNTs, respectively. Higher correlation coefficients from Langmuir isotherm model indicates the strong adsorptions of Pb(II) on the surface of CNTs (adsorption capacity Xm = 102.04 mg/g). From this study, the results indicates that the highest percentage removal of Pb (96.03%) can be achieved at pH 5, 40 mg/L of CNTs, contact time 80 min, and agitation speed 50 r/min.     

Effects of fly ash, Pseudomonas striata and Rhizobium on the reproduction of nematode Meloidogyne incognita and on the growth and transpiration of pea

Glasshouse experiments were conducted twice to assess the ash amendments (0, 20, and 40% with soil), a phosphate solubilizing microorganism Pseudomonas striata and a root-nodule bacterium Rhizobium sp on the reproduction of root-knot nematode Meloidogyne incognita and on the growth and transpiration of pea. Amendments of fly ash with soil had no effect on transpiration. However, M. incognita reduced the rate of transpiration from 1st week onward after inoculation while inoculation of Rhizobium sp and P. striata increased transpiration from 1st week onward after their inoculation both in nematode inoculated and uninoculated plants. Increase in transpiration was greater when both organisms were inoculated together. Addition of 20 and 40% fly ash with soil was beneficial for plant growth both in nematode inoculated and uninoculated plants. Inoculation of above organisms also increases plant growth of nematode inoculated and uninoculated plants in different fly ash soil mixture but increase in growth was greater when both organisms were inoculated together. Use of 20% fly ash increased galling and nematode multiplication over plants grown in without fly ash while 40% fly ash had adverse effect on galling and nematode multiplication. Rhizobium sp had greater adverse effect on galling and nematode multiplication than P. striata. Use of both organisms together had greater adverse effect on galling and nematode multiplication than caused by either of them alone. Highest reduction in galling and nematode multiplication was observed when both organisms were used in 40% fly ash amended soil. However, highest transpiration was observed in plants without nematodes and inoculated with both organisms together both in with or without fly ash amended soil.     

Deterioration of water quality of Surma river

Surma River is polluted day by day by human activities, poor structured sewerage and drainage system, discharging industrial and household wastes. The charas (natural channels) are responsible for surface runoff conveyance from its urban catchments to the receiving Surma River. Water samples have been collected from a part of Surma River along different points and analyzed for various water quality parameters during dry and monsoon periods. Effects of industrial wastes, municipal sewage, and agricultural runoff on river water quality have been investigated. The study was conducted within the Chattak to Sunamganj portion of Surma River, which is significant due to the presence of two major industries – a paper mill and a cement factory. The other significant feature is the conveyors that travel from India to Chattak. The river was found to be highly turbid in the monsoon season. But BOD and fecal coliform concentration was found higher in the dry season. The water was found slightly acidic. The mean values of parameters were Conductivity 84–805 μs; DO: dry-5.52 mg/l, monsoon-5.72 mg/l; BOD: dry-1mg/l, monsoon-0.878 mg/l; Total Solid: dry-149.4 mg/l, monsoon-145.7 mg/l. In this study, an effort has been taken to investigate the status of concentration of phosphate (PO⁻⁴) and ammonia–nitrogen (NH₄–N) at four entrance points of Malnichara to the city, Guali chara, Gaviar khal and Bolramer khal. Data has been collected from March–April and September–October of 2004. Concentrations have been measured using UV Spectrophotometer. Although the phosphate concentration has been found within the limit set by DOE for fishing, irrigation and recreational purposes, however ammonia–nitrogen has been found to exceed the limit.     

Adoption of green banking practices and environmental performance in Pakistan: a demonstration of structural equation modelling

Environment, Development and Sustainability - Banking industries are blamed to be among the major factors that affect global climate change both directly and indirectly. The green banking concept...     

Microfibrillated Cellulose-Silver Nanocomposite Based PVA Hydrogels and Their Enhanced Physical,Mechanical and Antibacterial Properties

Journal of Polymers and the Environment - Modification of cellulose with silver nanoparticles produces various nanocomposites with significantly developed properties. This work aims to prepare a...     

Report: Healthcare waste characterization in Chittagong Medical College Hospital, Bangladesh

Healthcare waste management (HCWM) options are inconsistent in Bangladesh. One of the first critical steps in the process of developing a reliable waste management plan requires a comprehensive understanding of the quantities and characteristics of the waste that needs to be managed. This study took into consideration both the quantity and quality of the generated waste to determine the generation rates and physical properties of healthcare waste (HCW) in Chittagong Medical College Hospital (CMCH) and also to estimate the amount of infectious and non-infectious waste generated in different wards. CMCH, the second largest hospital in Bangladesh, comprises 34 wards, 12 of which were selected randomly. Waste materials were collected from these wards and then segregated and weighed. Waste generation per day was found to be 73.22 kg/ward, 1.28 kg/bed and 0.57 kg/patient. A total of 2490 kg of HCW was produced each day in CMCH (37% being infectious and the rest being non-infectious waste). Infectious waste was 27.07 kg per ward, 0.47 kg per bed and 0.21 kg per patient and the non-infectious waste was 46.15 kg per ward, 0.81 kg per bed and 0.36 kg per patient per day. HCW comprised eight categories of waste materials with vegetable/food waste being the largest component (50.21%) and varied significantly (P < 0.05) among the 12 different wards studied. The greatest amount of HCW was recorded (154 kg) in Orthopaedics followed by 96.66 kg in the Medicine Unit-3 and the smallest amount was recorded in Casualty (8.79 kg). The amount of HCW was positively correlated with the number of occupied beds (rxy = 0.79, P < 0.01). There is no structured form of medical waste treatment in CMCH and most waste materials are dumped in open areas for natural degradation or re-sold by scavengers. It is essential to develop a national policy and implement a comprehensive action plan for HCWM that will provide environmentally sound technological measures to improve HCWM in Bangladesh.     

Extraction of arsenic in a synthetic arsenic-contaminated soil using phosphate

An environment-friendly and cost-effective extraction method has been studied for the removal of arsenic from contaminated soil. A yellow-brown forest soil was contaminated with arsenic(V) and used as a model soil. Among various potassium and sodium salts, potassium phosphate was most effective in extracting arsenic, attaining more than 40% extraction in the pH range of 6–8 with minimum damage to the soil properties. Exchange mechanism is proposed for the extraction of arsenic from soil by phosphate. Sequential extraction shows that phosphate is effective in extracting arsenic of Al- and Fe-bound forms. Arsenic of residual form was not extracted. Arsenic was efficiently extracted by phosphate solution of pH 6.0 at 300 mM phosphate concentration and at 40°C.     

Solar photodegradation of dichloroacetic acid and 2,4-dichlorophenol using an enhanced photo-Fenton process

The photo-Fenton process using potassium ferrioxalate as a mediator was investigated for the photodegradation of dichloracetic acid (DCA) and 2,4-dichlorophenol (DCP) in aqueous medium using solar light as source of irradiation. The influence of the solution depth, the light intensity and the effect of stirring the solution during irradiation process were evaluated using DCA as a model compound. A negligible influence of stirring the solution was observed when the concentration of ferrioxalate (FeOx) was 0.8 mM and solution depth was 4.5 or 14 cm. The optimum FeOx concentration determined for solution depths between 4.5 and 14 cm was 0.8 mM considering total organic carbon (TOC) removal during DCA irradiation. The high efficiency of the photo-Fenton process was demonstrated on summer days, when only 10 min of exposition (around noon) were sufficient to completely destroy the organic carbon of a 1.0 mM DCA solution in the presence of 0.8 mM FeOx and 6.0 mM H2O2 using a solution depth of 4.5 cm. It was observed that the photodegradation efficiency increases linearly with the solar light intensity up to values around 15 Wm(-2) but this linear relationship does not hold above this value showing a square root dependence. The photodegradation of a solution of DCP/FeOx showed a lower TOC removal rate than that observed for DCA/FeOx, achieving approximately 90% after 35 min irradiation under 19 W m(-2), while under this light intensity, the same TOC removal of DCA/FeOx was achieved in only 10 min irradiation.