Effect of different inorganic and organic compounds on sorption of 2,4-D and atrazine

In this study, the effects of size of adsorbent, temperature, pH of solution, ionic strength, presence of inorganic substances such as calcium ion, magnesium ions, chloride ions, fertilizers and presence of organic substances such as dissolved organic matter, surfactant, other herbicides on sorption of 2,4-D and atrazine onto rubber granules were investigated. The removal efficiency was more for fine adsorbent particles. Temperature played an important role in sorption process. Temperature effect was endothermic for 2,4-D and exothermic for atrazine, respectively. The removals were maximum at pH 4 for 2,4-D and at pH 6 for atrazine. The presence of other herbicide (butachlor) reduced sorption capacity of rubber granules by approximately 10% for both 2,4-D and atrazine. All other factors had insignificant effect on sorption capacity. The mathematical expressions were developed for predicting the overall percentage removal of 2,4-D and atrazine on the basis of major four controlling factors viz. adsorbent size, temperature, pH and presence of other herbicide.     

Bioconversion of sugarcane bagasse into a protein-rich product by white rot fungus

The fungus Pleurotus ostreatus NRRL-2366 degraded 56.7% and 45.9% of untreated and chemically pretreated (delignified) sugarcane bagasse, respectively, during 14-day incubation in a submerged fermentation process. The biodegradation percentages of cellulose, hemicellulose and lignin were 33.0%, 72.5% and 14.5%, respectively. An increment of 22.6% of crude protein content in the residual fermented material was observed. Chemical composition of the end-product and its amino acids profile were reported.     

Optimization of process parameters using response surface methodology for bioconversion of activated sludge by Penicillium corylophilum

The optimization of process parameters for the bioconversion of activated sludge by Penicillium corylophilum was investigated using response surface methodology （RSM）. The three parameters namely temperature of 33℃, agitation of 150 r/min, and pH of 5 were chosen as center point from the previous study of fungal treatment. The experimental data on chemical oxygen demand （COD） removal （%） were fitted into a quadratic polynomial model using multiple regression analysis. The optimum process conditions were determined by analyzing response surface three-dimensional surface plot and contour plot and by solving the regression model equation with Design Expert software. Box-Behnken design technique under RSM was used to optimize their interactions, which showed that an incubation temperature of 32.5℃, agitation of 105 r/min, and pH of 5.5 were the best conditions. Under these conditions, the maximum predicted yield of COD removal was 98.43%. These optimum conditions were used to evaluate the trail experiment, and the maximum yield of COD removal was recorded as 98.5%.     

Cyclone disaster vulnerability and response experiences in coastal Bangladesh

For generations, cyclones and tidal surges have frequently devastated lives and property in coastal and island Bangladesh. This study explores vulnerability to cyclone hazards using first‐hand coping recollections from prior to, during and after these events. Qualitative field data suggest that, beyond extreme cyclone forces, localised vulnerability is defined in terms of response processes, infrastructure, socially uneven exposure, settlement development patterns, and livelihoods. Prior to cyclones, religious activities increase and people try to save food and valuable possessions. Those in dispersed settlements who fail to reach cyclone shelters take refuge in thatched‐roof houses and big‐branch trees. However, women and children are affected more despite the modification of traditional hierarchies during cyclone periods. Instinctive survival strategies and intra‐community cooperation improve coping post cyclone. This study recommends that disaster reduction programmes encourage cyclone mitigation while being aware of localised realities, endogenous risk analyses, and coping and adaptation of affected communities (as active survivors rather than helpless victims).     

Potential health hazard of drinking water in restaurants and tea stalls

Potable and equitable drinking water (DW) is a fundamental human right and essential for human health. This study is conducted to assess the groundwater and jar water quality of the roadside restaurants and tea stalls used for drinking by the local people around the Gazipur City area in Bangladesh. Water samples from 173 restaurants and tea stalls are collected. The physico-chemical and biological parameters are analyzed according to the guidelines and standards. The results illustrate that the color, EC, and Mn of 41%, 80%, and 62% of the samples, respectively, exceed the WHO and Environmental Conservation Rules (ECR) standards. In addition, E. coli and total coliform exceeding the threshold standards are found in 47% and 64% of the water samples, respectively. The contamination of DW by fecal coliforms is confirmed and supported by prior studies, which indicates that the DW supplied in restaurants and tea stalls are unsafe because of the possible presence of pathogens. These may cause potential health hazards to consumers from various water-borne diseases. Poor sanitation, unhygienic practices, and improper disposal of wastewater are responsible for the microbial contamination of DW. So, the authorities in charge of these places should take the right regulatory steps, such as regular sanitation inspections, DW quality monitoring, hand-washing practices, and better sanitation in these places.     

Appraisal of stormwater-induced runoff quality influenced by site-specific land use patterns in the south-eastern region of Bangladesh

Environmental Science and Pollution Research - Urban stormwater runoff is considered as one of the major contributors to nonpoint source that contributes to the pollution of all water resources in...     

Removal of fluoride by effectively using spent cation exchange resin

Journal of Material Cycles and Waste Management - Spent strongly acidic cation exchange resin was effectively used for the removal of trace concentration of fluoride ions. For this purpose, the...     

Fabrication and Characterization of Polyaniline Based Nano-Composite with Their Physico-Chemical and Environmental Applications

A series of organic–inorganic conducting nano polymer-matrix composite cation-exchanger have been synthesized via sol–gel method and characterized through FTIR, XRD, TGA-DTA, SEM, and TEM studies. The structural studies confirm the semi-crystalline nature of the material but the morphology of the exchanger gets changed after incorporation of inorganic moiety. The particle size of the nano-composite was found to be 19.2 nm. The observed band gap for the different samples was found to be in the range of 3.70–4.61 eV which shows that nano-composite material covers semiconducting range but the resistivity of samples is highly dependent on the percentage of inorganic part in the composite. Further the oxidative degradation of the polymer backbone begins after the removal of trapped water successively followed by dopant and low molecular weight oligomers. During the antimicrobial screening, the nano-composite was found to be active against different strains of bacteria and fungi. Gel electrophoresis and molecular docking studies were carried out to check the interaction and mechanism of inhibition of microbial growth, respectively by studying the effect of the nano-composite with DNA-Topoisomerase-1.     

Biodegradation of anthracene and phenanthrene by bacteria isolated from oil-contaminated soil of Bangladesh

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous environmental pollutants entering into the environment through natural and anthropogenic activities. Owing to their toxicity to various life forms including humans, detoxification of PAHs is crucial to reduce their effects on cells. In this study, we have isolated two bacteria capable of degrading two common PAHs, anthracene and phenanthrene, from contaminated soil samples by using selective enrichment culture supplemented with test PAHs as the sole source of carbon and energy. The isolated bacteria were identified and affiliated as Pseudomonas aeruginosa strain KD and Stenotrophomonas maltophilia strain RC based on their 16s rRNA gene sequences. The degradation of anthracene and phenanthrene was estimated indirectly by measuring the decolourisation extent of a redox indicator, 2, 6-dichlorophenolindophenol, incorporated into PAH-supplemented mineral salt media. In the case of anthracene, ≥90% decolourisation was recorded at 20 and 48 days for P. aeruginosa and S. Maltophilia, respectively. On the other hand, ≥94% decolourisation was recorded at 56 and 52 days for P. aeruginosa and S. maltophilia, respectively during the utilisation of phenanthrene.