乐清湾海域生物体内多氯联苯的分布特征

以台州(乐清湾)为例,研究了乐清湾海域生物体内多氯联苯(PCBs)的分布,其中以鱼、贝类和虾为主要实验对象,分析了多氯联苯的来源、浓度及各种影响因素。结果表明,鱼肉中∑PCBs 的残留含量为8.61~23.06ng/g,贝类中∑PCBs 的残留含量为11.77~38.04ng/g,对虾中∑PCBs的残留含量为0.38~11.19ng/g。近海生物体内多氯联苯的来源与当地工业排污、航运、PCBs废旧设施非法处置或封存不当等一系列因素有关。     

A2O氧化沟缺氧区三维流场模拟及结构形式优化

以FLUENT软件为工具,选用三维RNG k-ε紊流数学模型对重庆井口污水厂A²O氧化沟缺氧区内的流场进行模拟,分析了缺氧区内流场分布不均匀及沉泥的原因,提出了水下推进器的合理设置位置与导流墙的合理设置方式,并对优化后的缺氧区进行了模拟计算。通过优化后模拟的结果可见,在相同的功率密度下,缺氧区内的流场得到了较均匀的分布,流速从原来的0.131 m/s提升到0.204 m/s,减少了能量的损失。底部的流速也从原来的0.140 m/s提升到0.226 m/s,有效的防止或减少了沟中的污泥沉积。优化的结果对实际工程的设计也有一定的指导意义。     

A2O氧化沟缺氧区三维流场模拟及结构形式优化

以FLUENT软件为工具,选用三维RNG k-ε紊流数学模型对重庆井口污水厂A2O氧化沟缺氧区内的流场进行模拟,分析了缺氧区内流场分布不均匀及沉泥的原因,提出了水下推进器的合理设置位置与导流墙的合理设置方式,并对优化后的缺氧区进行了模拟计算。通过优化后模拟的结果可见,在相同的功率密度下,缺氧区内的流场得到了较均匀的分布,流速从原来的0.131 m/s提升到0.204 m/s,减少了能量的损失。底部的流速也从原来的0.140 m/s提升到0.226 m/s,有效的防止或减少了沟中的污泥沉积。优化的结果对实际工程的设计也有一定的指导意义。     

Analysis of the toxicogenomic effects of exposure to persistent organic pollutants (POPs) in Slovakian girls: correlations between gene expression and disease risk

The chemical composition of persistent organic pollutants (POPs) in the environment is not uniform throughout the world, and these contaminants contain many structurally different lipophilic compounds. In a well-defined study cohort in the Slovak Republic, the POP chemicals present in the peripheral blood of exposed children were chemically analyzed. The chemical analysis data revealed that the relative concentration and profile of structurally different organic pollutants, including polychlorinated biphenyls (PCBs), 2,2′-bis(4-chlorophenyl)-1,1-dichloroethylene (p,p′-DDE), 2,2′-bis(4-chlorophenyl)-1,1,1-trichloro-ethane (p,p′-DDT), hexachlorobenzene (HCB) and β-hexachlorocyclohexane (β-HCH), may vary from individual to individual, even within the same exposure area. These chemicals can be broadly classified into two groups. The first group, the PCB congeners, primarily originated from industrial compounds and their byproducts. The second group of compounds originated from or was commonly used in the agricultural sector (e.g., DDT, HCB). The objective of this study was to examine the effects of the two POP exposure profiles on gene expression. For the study population, we selected pre-pubertal girls (mean age of 46.2 ± 1.4 months) with high POP concentrations in their blood (> 75% tile of total POP) and classified them in the high ‘PCB’ group when the total PCB concentration was significantly higher than the total concentration of other POP components and in the ‘Other Than PCB’ (OTP) group, when the total PCB concentration was significantly lower than the concentration of the other major POP constituents. A matched control group of girls (< 25% tile of total POP) was selected for comparison purpose (n = 5 per group). Our aims were to determine whether there were any common effects of high POP exposure at a toxicogenomic level and to investigate how exposure may affect physiological functions of the children in two different exposure scenarios. Global gene expression analysis using a microarray (Affymetrix Gene Chip Human genome U133 Plus 2.0 Array) platform was conducted on the total RNA of peripheral blood mononuclear cells from the girls. The results were analyzed by Partek GS, Louis, MI, which identified twelve genes (ATAD2B, BIVM, CD96, CXorf39, CYTH1 ETNK1, FAM13A, HIRA, INO80B, ODG1, RAD23B, and TSGA14) and two unidentified probe sets, as regulated differentially in both the PCB and OTP groups against the control group. The qRT-PCR method was used to validate the microarray results. The Ingenuity Pathway Analysis (IPA) software package identified the possible molecular impairments and disease risks associated with each gene set. Connective tissue disorders, genetic disorders, skeletal muscular disorders and neurological diseases were associated with the 12 common genes. The data therefore identified the potential molecular effects of POP exposure on a genomic level. This report underscores the importance of further study to validate the results in a random population and to evaluate the use of the identified genes as biomarkers for POP exposure.     

膜生物反应器处理餐饮废水中水回用工程实例研究

对膜生物反应器工艺处理餐饮废水的中水回用工程实例进行介绍,并对其调试和运行情况进行研究。结果表明,出水BOD5、NH3-N、浊度、pH等指标均满足《城市污水再生利用——城市杂用水水质》(GB/T18920—2002)规定的要求,可以回用作超市冲厕水;同时,该工艺对COD、TN、油类污染物、TP、SS也有较好的去除效果。技术经济分析表明,实施中水回用工程后可以节约费用为8.94万元/a。     

催化臭氧化降解技术中的两个问题

探讨了有机物特性及中间产物H₂O₂在催化臭氧化中的作用。结果表明,有机物在自由基链反应过程中的特性直接影响催化臭氧化的降解效率。当目标有机物是对链反应具有促进作用的甲酸时,自由基引发反应可以明显提高甲酸的臭氧化效率。当目标有机物是对自由基链反应具有抑制剂作用的乙酸时,O₃和Fe²⁺/O₃对乙酸有着相似的降解效率。以上结果表明,自由基引发反应并不是臭氧化降解效率提高的充分条件。另外,当臭氧化过程有H₂O₂产生时,必须考虑类Fenton反应对臭氧化效率的影响。     

规模化养鸡场冲洗废水三段式处理达标排放可行性试验研究

以青岛市某规模化养鸡场冲洗废水为研究对象,考察以"A/O生化+混凝沉淀+MBBR(Moving Bed Biofilm Reactor)氧化"三段式处理工艺处理该类废水达标排放的可行性。试验结果表明:A/O生化段可以有效去除废水中有机污染物,COD的去除率可达92.86%,出水COD浓度可以达到DB 37534—2005《山东省畜禽养殖业污染物排放标准》第三阶段要求;对BOD5、SS、氨氮及TP去除效率分别可以达到90.81%、89.04%、68.42%及80.79%,但出水尚达不到排放标准要求。混凝沉淀可以有效去除废水中SS及TP,处理后出水浓度分别为44 mg/L及2.26 mg/L,可以达到排放标准要求;经济有效的混凝剂为聚合硫酸亚铁,最优投加量为15 mg/L。MBBR氧化对BOD5及氨氮有着较好的去除效果,水力停留时间8 h时BOD5及氨氮出水浓度分别为42 mg/L及19.40 mg/L,出水可以达到排放标准要求。     

普光气田环境空气植物监测体系的初步构想

在简要回顾国内外有关植物监测大气污染研究的基础上,针对普光气田主要大气污染因子与环境监测现状,从监测植物筛选、监测点位选取、监测体系标准化、"植物-大气-土壤"综合评价系统以及应急监测机制等五个方面,讨论了构建该地区环境空气植物监测体系的基本想法和建议,并进行了展望,供项目建设决策参考。     

无铅焊料合金中重金属元素浸出行为的研究

选用Sn.3.5Ag-0.5Cu、Sn-3.5Ag、Sn-0.5Cu无铅焊料合金及它们与Cu的钎焊接头,研究了它们在典型的酸性、碱性和盐溶液中的重金属元素的浸出规律.结果表明,焊料合金中的主要浸出元素Sn在酸性或碱性溶液中的浸出量都不是太多,而在NaCl盐溶液中浸出量增大2个数量级.制备成钎焊接头后,在酸性环境中,Sn-3.5Ag和Sn.0.5Cu钎焊接头中Sn的浸出量增加1个数量级以上,而在NaOH碱性环境中.Sn-3.5Ag-0.5Cu钎焊接头中Sn的浸出量相对较高.该结果对电子垃圾填埋环境选择及相关决策提供了参考.     

Degradation of carbon tetrachloride in thermally activated persulfate system in the presence of formic acid

The thermally activated persulfate (PS) degradation of carbon tetrachloride (CT) in the presence of formic acid (FA) was investigated. The results indicated that CT degradation followed a zero order kinetic model, and CO ₂ ^– · was responsible for the degradation of CT confirmed by radical scavenger tests. CT degradation rate increased with increasing PS or FA dosage, and the initial CT had no effect on CT degradation rate. However, the initial solution pH had effect on the degradation of CT, and the best CT degradation occurred at initial pH 6. Cl^– had a negative effect on CT degradation, and high concentration of Cl^– displayed much strong inhibition. Ten mmol·L^–1HCO ₃ ^– promoted CT degradation, while 100 mmol·L^–1NO ₃ ^– inhibited the degradation of CT, but SO ₄ ^2– promoted CT degradation in the presence of FA. The measured Cl–concentration released into solution along with CT degradation was 75.8% of the total theoretical dechlorination yield, but no chlorinated intermediates were detected. The split of C-Cl was proposed as the possible reaction pathways in CT degradation. In conclusion, this study strongly demonstrated that the thermally activated PS system in the presence of FA is a promising technique in in situ chemical oxidation (ISCO) remediation for CT contaminated site.