The rationales behind the unit-segment theory and its analysis methodology for modeling vehicular movement networks

The theory of space accessibility analysis, space syntax, has been considered for capturing trip-makers’ route-choice decisions with an understanding that, while selecting routes, trip-makers tend to follow forward-facing fields traditionally represented by axial lines. But the idea of treating axial lines as a set of roadway segments representing an urban texture has remained under scrutiny when distinct procedures have been tested without much success. Nor has the axial-line theory seemed to gain much popularity within the orthodox transportation planning community. Studies show that a long axial line is found gaining configurational centrality, in general, for being well connected to its incident lines. Fragmenting a long axial line results in weakening it (in centrality terms), but also in generating a locally oriented model. Recent investigations, dealing with this problem, have resulted in the emergence of the unit-segment theory, which has turned out to be more sensitive to the local structures located within a large urban texture than the axial counterpart for the purpose of modeling vehicular movement networks without using origin–destination trip-counts. Essentially, the question now is: Is the unit-segment analysis also capable of generating syntax configurations that are equally sensitive to large and complex urban textures? What should be the methodology of such an analysis? This paper throws deeper insights into these questions by producing theoretical and empirical research findings and seeks to develop a common ground for both transportation planning and space syntax communities to work together for gaining a better understanding of how urban configurations relate to urban vehicular movement networks.     

油气勘探开发建设项目环境影响评价管理探讨

油气勘探开发建设项目存在滚动开发的特点,在近年来的环境影响评价管理实践中引发较多矛盾。文章分析了目前油气勘探开发建设项目环评管理中存在的环评要求不清晰、分类管理需细化、审查尺度不统一等问题,并从界定建设项目类型、明确环评开展时间和要求、明确环评文件编制类型、界定项目重大变更四个方面提出了改进油气项目环评管理的建议。     

Current status and historical variations of phthalate ester (PAE) contamination in the sediments from a large Chinese lake (Lake Chaohu)

The residual levels of phthalate esters (PAEs) in the surface and two core sediments from Lake Chaohu were measured with a gas chromatograph–mass spectrometer (GC–MS). The temporal–spatial distributions, compositions of PAEs, and their effecting factors were investigated. The results indicated that di-n-butyl phthalate (DnBP), diisobutyl phthalate (DIBP), and di(2-ethylhexyl) phthalate (DEHP) were three dominant PAE components in both the surface and core sediments. The residual level of total detected PAEs (∑PAEs) in the surface sediments (2.146?±?2.255 μg/g dw) was lower than that in the western core sediments (10.615?±?9.733 μg/g) and in the eastern core sediments (5.109?±?4.741 μg/g). The average content of ∑PAEs in the surface sediments from the inflow rivers (4.128?±?1.738 μg/g dw) was an order of magnitude higher than those from the lake (0.323?±?0.093 μg/g dw), and there were similar PAE compositions between the lake and inflow rivers. This finding means that there were important effects of PAE input from the inflow rivers on the compositions and distributions of PAEs in the surface sediments. An increasing trend was found for the residual levels of ΣPAEs, DnBP, and DIBP from the bottom to the surface in both the western and eastern core sediments. Increasing PAE usage with the population growth, urbanization, and industrial and agricultural development in Lake Chaohu watershed would result in the increasing production of PAEs and their resulting presence in the sediments. The significant positive relationships were also found between the PAE contents and the percentage of sand particles, as well as TOC contents in the sediment cores.     

Research and application of method of oxygen isotope of inorganic phosphate in Beijing agricultural soils

Phosphorus (P) in agricultural ecosystems is an essential and limited element for plants and microorganisms. However, environmental problems caused by P accumulation as well as by P loss have become more and more serious. Oxygen isotopes of phosphate can trace the sources, migration, and transformation of P in agricultural soils. In order to use the isotopes of phosphate oxygen, appropriate extraction and purification methods for inorganic phosphate from soils are necessary. Here, we combined two different methods to analyze the oxygen isotopic composition of inorganic phosphate (δ¹⁸O_P) from chemical fertilizers and different fractions (Milli-Q water, 0.5 mol L^?1 NaHCO₃ (pH = 8.5), 0.1 mol L^?1 NaOH and 1 mol L^?1 HCl) of agricultural soils from the Beijing area. The δ¹⁸O_P results of the water extracts and NaHCO₃ extracts in most samples were close to the calculated equilibrium value. These phenomena can be explained by rapid P cycling in soils and the influence of chemical fertilizers. The δ¹⁸O_P value of the water extracts and NaHCO₃ extracts in some soil samples below the equilibrium value may be caused by the hydrolysis of organic P fractions mediated by extracellular enzymes. The δ¹⁸O_P values of the NaOH extracts were above the calculated equilibrium value reflecting the balance state between microbial uptake of phosphate and the release of intracellular phosphate back to the soil. The HCl extracts with the lowest δ¹⁸O_P values and highest phosphate concentrations indicated that the HCl fraction was affected by microbial activity. Hence, these δ¹⁸O_p values likely reflected the oxygen isotopic values of the parent materials. The results suggested that phosphate oxygen isotope analyses could be an effective tool in order to trace phosphate sources, transformation processes, and its utilization by microorganisms in agricultural soils.     

Healing the wounds in the landscape—reclaiming gravel roads in conservation areas

Reclaiming abandoned and unmaintained roads, built originally for forestry and mineral extraction, is an important part of ecological restoration, because the roads running through natural habitats cause fragmentation. The roads can be reclaimed in a passive way by blocking access to the road, but successful seedling recruitment may require additional management due to the physical constraints present at the road. We established a full factorial study to compare the effects of three road reclaiming measures, namely ripping, creation of safe sites by adding mulch and pine seed addition, on soil processes, recovery of understorey vegetation and seedling recruitment in three conservation areas in eastern Finland. We surveyed soil organic matter, frequency and cover of plant functional types, litter and mineral soil, and number of tree seedlings. The soil organic matter was, on average, 1.3-fold in the 50-cm-deep ripping treatment relative to unripped and 20-cm-deep ripping treatments. The germination and survival of deciduous seedlings and grass establishment were promoted by adding mulch. The addition of pine seeds counteracted the seed limitation and enhanced the regeneration of trees. The treatment combination consisting of ripping, adding mulch and pine seed addition enhanced the vegetation succession and tree-seedling recruitment most: the cover of grasses, herbs and ericaceous dwarf shrubs was 1.3–7.6-fold and the number of coniferous tree seedlings was 3.4–7.1-fold relative to the other treatment combinations. Differences between short-term (1–3 years) and longer-term (6 years) results indicate the need for a sufficient observation period in road reclamation studies.     

Estuarine circulation in the Taranto Seas

The Taranto basin is a shallow water marine system in the South of Italy characterized by the presence of a lagoon environment together with a semi-enclosed bay connected to the Ionian Sea. This marine system experienced over the last few decades strong biochemical pollution and environmental degradation, and it is considered a hotspot study site for economic, ecological and scientific reasons. The aim of this study was to examine, on an annual temporal scale and with high spatial resolution, the main hydrodynamical processes and transport scales of the system by means of a 3D finite element numerical model application, adopting the most realistic forcing available. The model allowed us to assess the role played by baroclinic terms in the basin circulation, describing its estuarine nature. In particular, the main features of water circulation, salinity and temperature distribution, water renewal time and bottom stress were investigated. Our results allowed us to equate this system dynamic to that of a weakly stratified estuary, identifying the main driving sources of this mechanism. The vertical stratification over the whole year was proved to be stable, leading to a dual circulation flowing out on the surface, mainly through Porta Napoli channel, and inflowing on the bottom mainly through Navigabile channel. This process was responsible also for the renewal time faster on the bottom of the Mar Piccolo basin than the surface. Due to the great importance of the Taranto basin for what concerns sediment pollution, also the effect of currents in terms of bottom stress was investigated, leading to the conclusion that only in the inlets area the values of bottom stress can be high enough to cause erosion.     

In situ immobilization of cadmium in soil by stabilized biochar-supported iron phosphate nanoparticles

The potential for nanoscale phosphate amendments to remediate heavy metal contamination has been widely investigated, but the strong tendency of nanoparticles to form aggregates limits the application of this technique in soil. This study synthesized a composite of biochar-supported iron phosphate nanoparticle (BC@Fe₃(PO₄)₂) stabilized by a sodium carboxymethyl cellulose to improve the stability and mobility of the amendment in soil. The sedimentation test and column test demonstrated that BC@Fe₃(PO₄)₂ exhibited better stability and mobility than iron phosphate nanoparticles. After 28 days of simulated in situ remediation, the immobilization efficiency of Cd was 60.2 %, and the physiological-based extraction test bioaccessibility was reduced by 53.9 %. The results of sequential extraction procedures indicated that the transformation from exchangeable (EX) Cd to organic matter (OM) and residue (RS) was responsible for the decrease in Cd leachability in soil. Accordingly, the pot test indicated that Cd uptake by cabbage mustard was suppressed by 86.8 %. Compared to tests using iron phosphate nanoparticles, the addition of BC@Fe₃(PO₄)₂ to soil could reduce the Fe uptake of cabbage mustard. Overall, this study revealed that BC@Fe₃(PO₄)₂ could provide effective in situ remediation of Cd in soil.     

The application of regenerable sorbents for mercury capture in gas phase

Mercury is a well-known toxic element, and flue gas streams emitted from coal-fired utilities are one of the largest anthropogenic sources of this element. This study briefly reviews the proposed technologies for reducing mercury emissions from coal combustion, focusing on an emerging process which involves the use of regenerable sorbents and especially those loaded with noble metals. Among the mercury species formed during coal combustion, elemental mercury is the most difficult to remove from the flue gases due to its low reactivity and insolubility in water. The widespread interest in using regenerable sorbents with metals is due to their ability to retain elemental mercury. With this technology, not only can efficiencies of 100 % be reached in the retention of elemental mercury but also a way to avoid the generation of new wastes loaded with mercury. This study considers the main aspects that must be taken into account when developing effective regenerable sorbents for mercury capture, with special attention to sorbents containing noble metals. The characteristics of this process are compared with those of other processes in a more advanced state of development.     

Influence of filtration velocity on DON variation in BAF for micropolluted surface water treatment

Biological aerated filters (BAFs) are widely used for the treatment of micropolluted surface water. However, the biological process produces dissolved organic nitrogen (DON), which, as precursors of nitrogenous disinfection by-products, pose potential threats to drinking water safety. Therefore, to control DON in BAF effluent, it is necessary to study the influence of BAF operation parameters on DON production. In this study, the influence of filtration velocity in a BAF on DON production was investigated. Under different filtration velocity (0.5, 2, and 4 m/h) conditions, profiles of DON concentrations along the media layer were measured. The profile at a filtration velocity of 0.5 m/h showed a decreasing trend, and the ones under filtration velocities of 2 and 4 m/h fluctuated in a small range (from 0.1 to 0.4 mg/L). Moreover, the relatively high filtration velocities of 2 and 4 m/h resulted in a lower level of DON concentration. Additionally, 3D excitation-emission matrix fluorescence spectroscopy was used to characterize DON. It is found that the patterns of DON at a relatively high filtration velocity condition (4 m/h) were obviously different from the ones under low filtration velocity conditions (0.5 and 2 m/h).