Increasing the application of gas engines to decrease China’s GHG emissions

This paper employs a review of the technical literature to estimate the potential decrease in greenhouse gas (GHG) emissions that could be achieved by increasing the application of gas engines in China in three sectors: urban public transport vehicle; shipping; and thermal power plants. China’s gas engine development strategies and three types of gas resource are discussed in the study, which indicates that gas engines could decrease GHG emissions by 520 megatonnes (Mt) of carbon dioxide equivalent (CO_2e) by 2020. This would account for 9.7 % of the government’s target for decreasing GHG emissions and is dominated by methane recovery from the use of coal mine gas (CMG) and landfill gas (LFG) for power generation. In the public urban transport vehicle and shipping sectors the low price of natural gas and the increasing demand for the control of harmful emissions could spur the rapid uptake of gas engine vehicles. However, the development of CMG- and LFG-fuelled power plants has been limited by the unwillingness of local enterprises to invest in high-performance gas engine generators and the associated infrastructure. Therefore, further compulsory policies that promote CMG use and LFG recovery should be implemented. Moreover, strict regulations on limiting methane leakage during the production and distribution of gas fuels are urgently needed in China to prevent leakage causing GHG emissions and largely negating the climate benefits of fuel substitution. Strategies for increasing the application of gas engines, promoting gas resources and recovering methane in China are instrumental in global GHG mitigation strategies.     

An empirical analysis of energy efficiency measures applicable to cities,regions, and local governments,based on the case of South Korea’s local energy saving program

As highlighted in the outcome of the Paris Agreement at the 21st Conference of Parties of the United Nations Framework Convention on Climate Change there has been a recent push for the stronger mitigation actions of cities, regions, and local governments. Energy efficiency is a tool that can be leveraged by not only industry or national governments but also cities, regions, and local governments for mitigation purposes. However, studies on energy efficiency as a mitigation tool thus far have focused on the national or transnational scale, and on certain sectors of industry. The purpose of this paper is to find the most cost-efficient energy efficiency measures (EEMs) at the city, region, and local government level. To that end, this paper examines the yearly energy savings and greenhouse gas (GHG) reduction intensity, as well as energy savings and GHG reduction efficiency, in the case of EEMs conducted by South Korean local governments. Yearly energy savings intensity and GHG reduction intensity are estimated to be in the range of 0.094～0.375 tonne of oil equivalent (TOE)/M-KRW (million Korean won) and 0.287～1.180 tCO2e/M-KRW. Results show that inverter installation at water and sewage treatment plants and improvement of pump efficiency are the most cost-efficient EEMs. Moreover, energy savings efficiency and GHG reduction efficiency are within the range of 18.29～45.31 %, at an average of 30.5 % GHG reduction potential. If this reduction potential is applied to the buildings and facilities regulated and run by cities/local governments, there is a worldwide reduction potential of 1.023 billion tCO₂ compared to 2020 business as usual levels.     

外浮顶原油储罐VOCs泄漏损耗及排放量核算

介绍了国内外浮顶原油储罐VOCs泄漏损耗形式。结合美国环保署(EPA)发布的AP-42中第7章储罐的VOCs相关排放公式,建立了外浮顶原油储罐VOCs排放量核算的方法,并对核算方法的应用进行了举例分析,有助于掌握现阶段原油外浮顶储罐的泄漏损耗量,为推进企业绿色低碳发展,控制原油储罐VOCs总量排放提供参考。     

炼化企业分析化验岗位职业病危害防治措施研究

采用现场职业卫生学调查方法了解炼化企业分析化验岗位接触各类危害因素情况,对正常情况下分析化验工作场所进行各类职业病危害因素检测,同时测量各通风橱控制点风速、排风罩罩口风速;通风橱(风机通风量增加、管道改造)以及排风罩改造后,再次进行控制点风速测量、工作场所危害因素采样检测,对比改造前后测量数据,探讨分析化验岗位职业病危害防治措施。结果显示,工作场所通风设施的风机选型、管道合理化布置、排风罩围挡的设置、补风等因素均对通风橱、排风罩控制点风速产生影响;通风设施改造后工作场所职业病危害因素浓度有所降低。由此可见,炼化企业分析化验工作场所通风设施是职业病危害防治的重要措施。     

基于GIS和LUR模型的西安市PM2.5浓度空间分布模拟研究

基于地理信息系统GIS和土地利用回归LUR模型,模拟西安市PM2.5浓度空间动态分布,结果表明:与PM2.5浓度相关性最高的分别为缓冲区为2 km的水域面积、人口密度和距离水域距离,R 2分别为0.501,0.393和0.280;与PM2.5浓度相关性最低的分别为缓冲区为4 km的水域面积、未利用地面积和耕地面积,R 2分别为0.039、0.021和0.017.未考虑风速建立的LUR模型多元回归的相关系数为0.856,R 2为0.733,考虑风速的相关系数为0.892,R 2为0.796,表明风速对于污染物的分布影响较大,LUR模型模拟效果较好.模拟的PM2.5年均浓度高风险区分布于中部,中风险区分布于中西部,低风险区分布于东南部和西部.     

延迟焦化装置含硫污水减量化实践

在分析160×10~4t/a延迟焦化装置含硫污水来源及减量化潜力基础上,通过采取优化加热炉注汽量、调整焦炭塔吹汽量、降低分馏塔汽提蒸汽量、回用含硫污水汽提净化水等管理和技术措施,装置节约了蒸汽消耗,源头减少了含硫污水产生量,增加了含硫污水汽提净化水回用量,年经济效益达460万元。     

GHS在危险化学品管理中的应用研究

阐述了GHS产生的背景及其在减少化学品事故,提高化学品安全管理水平,消除贸易壁垒,降低监管、企业成本等方面发挥的重要作用。介绍了GHS国内应用情况,对国内推行GHS提出了几点建议。     

双层内衬改造技术在埋地油罐中的应用研究

介绍了共结构双层内衬改造技术,其结构共由5层组成,分别为基础层(防腐层和加强密封层组成)、中空监测层、内衬加强层、防油防腐层和导静电层;采用该技术可对加油站埋地单层钢制油罐进行双层改造,经过罐内清洗、喷砂除锈、基础层施工、中空监测层施工、内衬加强层施工、防油防腐层施工、导静电层施工和整个系统气密性的保压检测,完成双层内衬油罐的现场改造;采用GB30040规定的Ⅰ级真空泄漏监测方法,可以在油品泄漏前报警,实现埋地油罐整体安全水平的提升,具有重要的现实意义。     

酸性水储罐安全性研究

为预防酸性水储罐气相空间闪爆事故的发生,取样分析了某炼厂酸性水罐气相空间组成,根据气相组成配制了3种混合可燃气体,利用5 L爆炸极限测试仪测定了混合可燃气体在不同氧含量条件下的爆炸极限,根据爆炸极限数据计算出3种混合可燃气体的极限氧含量。结果表明:随着体系中氧含量增加,爆炸上限明显升高,爆炸下限无明显变化;烃类物质含量高时,混合可燃气体的爆炸上下限均降低,爆炸极限宽度变小;硫化氢和氢气含量高时,混合可燃气体爆炸上下限均升高,爆炸极限宽度变大;3种气相组成的极限氧含量分别为:8.1%、9.9%和10.3%,为防止罐顶气相组成发生闪爆,建议氧含量浓度控制在4%以内,当氧含量浓度到达5%时建议启动氮气联锁进行惰化和稀释。     

高效酶促进剂Accell在养猪废水处理工艺中的应用研究

为了考察高效酶促进剂在养猪废水处理工艺中的功能,在养猪废水治理工艺的生化段SBR反应器进水中投加高效酶促进剂Accell.两套相同的装置平行运行的效果对比表明:投加Accell可减少剩余污泥的排放量,增加溶氧效率,强化污染物的去除效果;投加高效酶的装置对COD的去除可在SBR反应器基础上再减少40%以上,对NH3-N的去除可进一步再减少25%以上,对P的去除也有一定的促进作用.