Component optimization of dairy manure vermicompost,straw, and peat in seedling compressed substrates using simplex-centroid design

Vermicomposting is a promising method to disposal dairy manures, and the dairy manure vermicompost (DMV) to replace expensive peat is of high value in the application of seedling compressed substrates. In this research, three main components: DMV, straw, and peat, are conducted in the compressed substrates, and the effect of individual components and the corresponding optimal ratio for the seedling production are significant. To address these issues, the simplex-centroid experimental mixture design is employed, and the cucumber seedling experiment is conducted to evaluate the compressed substrates. Results demonstrated that the mechanical strength and physicochemical properties of compressed substrates for cucumber seedling can be well satisfied with suitable mixture ratio of the components. Moreover, DMV, straw, and peat) could be determined at 0.5917:0.1608:0.2475 when the weight coefficients of the three parameters (shoot length, root dry weight, and aboveground dry weight) were 1:1:1. For different purpose, the optimum ratio can be little changed on the basis of different weight coefficients.

Implications: Compressed substrate is lump and has certain mechanical strength, produced by application of mechanical pressure to the seedling substrates. It will not harm seedlings when bedding out the seedlings, since the compressed substrate and seedling are bedded out together. However, there is no one using the vermicompost and agricultural waste components of compressed substrate for vegetable seedling production before. Thus, it is important to understand the effect of individual components to seedling production, and to determine the optimal ratio of components.     

采用光谱学技术分析邻苯二甲酸酯与DNA互作机制

邻苯二甲酸酯(PAEs)作为增塑剂被广泛使用,易渗透到环境中产生环境毒性,多种PAEs已被美国环境保护署和中国环境监测中心列为优先控制污染物,其生态毒理学机制被广泛关注。本试验以小牛胸腺DNA(ct DNA)为供试材料,旨在通过光谱学技术探究PAEs与DNA的相互作用机制。在紫外可见光谱试验中,随着PAEs浓度的增加,DNA紫外光谱出现增色效应,证明DNA的部分碱基对被PAEs破坏,且PAEs与DNA通过嵌插作用结合。荧光光谱试验中,随着PAEs浓度的增加,EBct DNA体系荧光强度逐渐降低,邻苯二甲酸二甲酯(DMP)、邻苯二甲酸二乙酯(DEP)和邻苯二甲酸二丁酯(DBP)的最大荧光抑制率分别为55%、50%和36%;KI荧光猝灭试验中,在加入DNA之后KI对DMP、DEP和DBP的荧光猝灭常数Ksv分别从7.992(R2=0.9970)、10.270(R2=0.9960)和13.52(R2=0.9806)降低到6.721(R2=0.9963)、7.047(R2=0.9599)和11.03(R2=0.9803),荧光猝灭常数均降低,实验结果证明PAEs与DNA通过嵌插作用结合。盐离子试验中,随着Na Cl浓度的增加,PAEsct DNA的荧光强度没有发生变化。试验结果排除了PAEs与DNA分子之间沟槽作用的可能,确定了其结合方式为嵌插作用,随着PAEs侧链的逐渐增长,嵌插作用逐渐减弱。     

Study on low-temperature plasma γ-Al2O3 catalytic viscosity reduction of polyacrylamide solution

The wide use of polyacrylamide (PAM) in enhanced oil recovery generates a large amount of polymer-bearing wastewater featuring high viscosity and difficult viscosity reduction, making the treatment of wastewater increasingly difficult. In this paper, the experimental study on reducing the viscosity of wastewater containing polyacrylamide by using the plasma generated by dielectric barrier discharge (DBD) and the synergistic effect of catalyst γ-Al₂O₃ is carried out. The law of plasma reducing the viscosity of wastewater containing polyacrylamide is studied under the different conditions of amounts of γ-Al₂O₃ catalyst, discharge voltages, and initial concentrations of polyacrylamide-containing wastewater. The mechanism of viscosity reduction of polyacrylamide is studied through environmental scanning electron microscope (ESEM), Fourier transform infrared (FTIR) spectrometer, and X-ray photoelectron spectroscopy (XPS). The results show that the catalytic viscosity reduction is the best when the discharge voltage is 18 kV and the discharge time is 15 min. With the increase in the input of the γ-Al₂O₃ catalyst, the viscosity of the PAM solution decreases gradually. When the amount of γ-Al₂O₃ is 375 mg, the shear rate changes from 0.5 1/sec to 28 1/sec, and the viscosity of the solution containing polyacrylamide changes from 434.5 mPa·s to 40.2 mPa·s. The viscosity reduction rate of the PAM solution is 90.7%. After the catalytic viscosity reduction, the functional groups of polyacrylamide do not change much. The elemental composition of the catalyst has not changed, which is still Al, C, and O.

     

基于场景缩减法的供水管网抗震可靠性评估∗

供水管网抗震可靠性是在可能地的震烈度下管网的服务水平,目前大多数采用蒙特卡洛模拟产生数量庞大的震损样本进行估计,此方法给大型复杂管网抗震可靠性的评估带来极大工作量和超高时间成本。为了克服这些问题,提出了多爆管压降计算模型,并引入场景缩减方法以提高计算效率。首先,利用多爆管压降模型计算震损场景下节点水压。其次,利用系统聚类中类平均法对震损节点水压进行场景合并和分类。然后利用k‐medoids聚类对每一类选取中心点作为典型场景。最后,通过典型场景确定节点和系统可靠性指数。将某实际管网应用所提算法计算并与传统蒙特卡洛模拟结果进行对比。结果表明,基于线性估计多爆管压降模型是合理的,基于场景缩减法的可靠性评估是可行的,提高典型场景数量可降低评估误差。因此,该算法可在保证结果准确的同时提高计算效率。     

含油污泥热解处理的试验与应用

介绍了欢三联含油污泥热解处理工程的工艺流程、技术要点、设计参数、运行效果和效益情况。调试工作表明,热解炉系统工艺作为一个整体,能够稳定有效运行,残渣的测验结果表明,残渣可以达到无害化程度,含油率小于0.3%(满足GB 4284-84《农用污泥中污染物控制标准》的要求)。以12t/d的处理量运行,能耗成本为74.47元/t,产生的经济效益为125.50元/t,同时产生较好的社会效益。另外,热解固态产物也有较好的利用价值,可以进一步研究利用。     

垃圾渗滤液处理工艺中有机污染物的三维荧光光谱

利用荧光发射和三维荧光光谱研究了三峡库区某垃圾堆场的渗滤液及其处理工艺出水溶解性有机质(DOM)的荧光光谱特性。堆场渗滤液的DOM含有类酪氨酸、色氨酸及紫外区类富里酸,特征荧光峰中心位于E_x/E_m=275 nm/305 nm,为高激发波长类酪氨酸,与前人的研究结果并不一致,这可能与垃圾的堆放期有关。渗滤液和各处理工艺出水的荧光指数f_450/500均大于1.9,表明腐殖质主要为微生物源。渗滤液在处理前后荧光峰特征和强度均发生明显改变,类蛋白荧光强度与DOC值变化趋势基本一致。生化处理工艺中,类蛋白荧光强度降低了66.4%～95.5%,紫外区类富里酸荧光强度只降低了28.8%,显示类蛋白质具有良好的可生化性,而类富里酸相对较难生化降解。三维荧光光谱能反映渗滤液处理过程中污染物的种类、性质和数量等变化信息,能快速地进行定性分析、定量评价。     

曝气生物滤池处理农村污水的中试研究

采用研制的曝气生物滤池对农村污水进行处理,研究其性能特点和影响因素。结果表明：在气水比为5∶1,水力停留时间（HRT）为15 h,进水COD浓度在250 mg/L以下时,COD和氨氮的去除率分别在80％和90％以上,出水COD和氨氮值达到国家《城镇污水处理厂污染物排放标准》一级A标准;反应器在冬季水温12℃以上运行时出水COD和氨氮值比在夏季运行时有所上升,但去除率仍在80%和90%以上,可以达到排放标准。     

大型城市客车加速模拟工况排放特性的实验研究

通过对258辆大型城市客车进行加速模拟工况排放测试,研究了城市客车的排放特性,比较了压缩天然气(CNG)车辆与汽油车辆的排放特性,分析了车辆车龄与排放的关系、发动机燃油供给方式与排放的关系,以及车辆总质量与排放的关系。研究结果表明：燃用CNG的车辆其CO、NOx排放较汽油低许多,尤其是CO,但HC排放较汽油高;电喷车辆的CO、NOx排放比化油器车低,但HC排放值高于化油器车;车龄增长,车辆的CO、NOx排放值增大,但HC变化不明显;车辆总质量增加,排放呈下降趋势。     

国际湿地保护政策及形式的演变研究

湿地丧失与退化已被公认为全球性的生态环境和社会问题。本文在综述相关文献的基础上,将国际湿地政策的演变划分为三个阶段：20世纪60年代以前的湿地开发期,20世纪60年代至90年代间的政策转型期以及20世纪90年代至今的湿地全面保护期。湿地被围垦、转换为农地是湿地开发期最主要的特质,是导致湿地大量丧失与退化的主要肇因;《湿地公约》的签署标志着国际湿地政策进入转型期阶段,倡导湿地保护与合理利用;而美国政府于上个世纪90年代初期提出的湿地“零净损失”政策目标,成为继《湿地公约》签署后推动全球湿地政策发生深刻改变的最主要驱动力之一,标志着国际湿地政策进入全面保护期阶段。     

基于AHP的炼化设备管理模糊综合评价模型研究

依据层次分析法(AHP)理论,建立设备管理多层次评价指标,结合各指标重要性确定权重,建立适用于炼化企业的模糊综合评价模型,并以某炼化企业为例,使用该模型对企业设备管理进行定性与定量评估,进行了管理薄弱项的确认及改进措施的制定.