Effects of continuously regenerating diesel particulate filters on regulated emissions and number-size distribution of particles emitted from a diesel engine

The effects of continuously regenerating diesel particulate filter (CRDPF) systems on regulated gaseous emissions, and number-size distribution and mass of particles emanated from a diesel engine have been investigated in this study. Two CRDPF units (CRDPF-1 and CRDPF-2) with di erent specifications were separately retrofitted to the engine running with European steady-state cycle (ESC). An electrical low pressure impactor (ELPI) was used for particle number-size distribution measurement and mass estimation. The conversion/reduction rate (RCR) of hydrocarbons (HC) and carbon monoxide (CO) across CRDPF-1 was 83% and 96.3%, respectively. Similarly, the RCR of HC and CO and across CRDPF-2 was 91.8% and 99.1%, respectively. The number concentration of particles and their concentration peaks; nuclei mode, accumulation mode and total particles; and particle mass were highly reduced with the CRDPF units. The nuclei mode particles at downstream of CRDPF-1 and CRDPF-2 decreased by 99.9% to 100% and 97.8% to 99.8% respectively; and the particle mass reduced by 73% to 92.2% and 35.3% to 72.4%, respectively, depending on the engine conditions. In addition, nuclei mode particles increased with the increasing of engine speed due to the heterogeneous nucleation initiated by the higher exhaust temperature, while accumulation mode particles were higher at higher loads due to the decrease in the air-to-fuel ratio (A/F) at higher loads.     

溴酸钠/亚硫酸氢钠体系降解芬太尼

研究了芬太尼在溴酸钠/亚硫酸氢钠体系中的降解行为,考察了影响芬太尼降解效率的因素.结果显示,溴酸钠与亚硫酸氢钠的物质的量比在1∶0.48至1∶1.26之间,体系的氧化能力强.体系对芬太尼的氧化降解效率与溴酸钠/亚硫酸氢的浓度呈正比,1 mol·L-1的溴酸钠/亚硫酸氢钠、29倍于芬太尼用量可在2 min完全降解芬太尼.有机溶剂具有富集有效氧化成分和芬太尼的作用,有机/水两项体系更利于芬太尼的氧化降解.向完成降解反应后的溴酸钠/亚硫酸氢钠废液中补加亚硫酸氢钠中和剩余氧化剂,可使反应液彻底环境无害化.此外,采用气质联用技术鉴定了芬太尼在溴酸钠/亚硫酸氢体系中的降解产物,探讨了可能的降解机理.     

CeO2 doping boosted low-temperature NH3-SCR activity of FeTiOx catalyst: A microstructure analysis and reaction mechanistic study

• CeO₂ doping significantly improved low-temperature NH₃-SCR activity on FeTiO_x. • The crystallinity of FeTiO_x was decreased dramatically after CeO₂ doping. • Unique Ce-O-Fe structure in FeCe_0.2TiO_x accounted for its superior redox property. • Facile activation of NH₃ to-NH₂ on FeCe_0.2TiO_x promoted the DeNO_x efficiency. FeTiO_x has been recognized as an environmental-friendly and cost-effective catalyst for selective catalytic reduction (SCR) of NO_x with NH₃. Aimed at further improving the low-temperature DeNO_x efficiency of FeTiO_x catalyst, a simple strategy of CeO₂ doping was proposed. The low-temperature (<250℃) NH₃-SCR activity of FeTiO_x catalyst could be dramatically enhanced by CeO₂ doping, and the optimal composition of the catalyst was confirmed as FeCe_0.2TiO_x, which performed a NO_x conversion of 90% at ca. 200℃. According to X-ray diffraction (XRD), Raman spectra and X-ray absorption fine structure spectroscopy (XAFS) analysis, FeCe_0.2TiO_x showed low crystallinity, with Fe and Ce species well mixed with each other. Based on the fitting results of extended X-ray absorption fine structure (EXAFS), a unique Ce-O-Fe structure was formed in FeCe_0.2TiO_x catalyst. The well improved specific surface area and the newly formed Ce-O-Fe structure dramatically contributed to the improvement of the redox property of FeCe_0.2TiO_x catalyst, which was well confirmed by H₂-temperature-programmed reduction (H₂-TPR) and in situ XAFS experiments. Such enhanced redox capability could benefit the activation of NO and NH₃ at low temperatures for NO_x removal. The detailed reaction mechanism study further suggested that the facile oxidative dehydrogenation of NH₃ to highly reactive-NH₂ played a key role in enhancing the low-temperature NH₃-SCR performance of FeCe_0.2TiO_x catalyst.     

多组分电镀污泥酸浸出液中铁的分离

研究了采用Ｐ５０７－煤油－Ｈ２ＳＯ４萃取体系分离电镀污泥酸浸出液中Ｆｅ＾３＋的工艺，确定了从含有多种上金属组分的硫酸溶液中萃取铁的最佳工艺条件以及负载有机相反萃取较优工艺条件，研究结果表明，以Ｐ５０７为萃取剂，硫酸为洗涤剂，经３级萃取、２级洗涤的分馏萃取后，可以从含有多种金属组分的硫酸溶液中分离出９９．９％的铁，其他金属的流失量小于１％，不影响后者的回收，铁在工艺过程中以ＦｅＣｌ３·６Ｈ２Ｏ的形式     

Catalytic fast pyrolysis of Kraft lignin with HZSM-5 zeolite for producing aromatic hydrocarbons

Catalytic fast pyrolysis (CFP) of Kraft lignins with HZSM-5 zeolite for producing aromatics was investigated using analytical pyrolysis methods. Two Kraft lignins were fast pyrolyzed in the absence and presence of HZSM-5 in a Curie-point pyrolyzer. Without the catalyst, fast pyrolysis of lignin predominantly produced phenols and guaiacols that were derived from the subunits of lignin. However, the presence of HZSM-5 changed the product distribution dramatically. As the SiO₂/Al₂O₃ ratio of HZSM-5 decreased from 200 to 25 and the catalyst-to-lignin ratio increased from 1 to 20, the lignin-derived oxygenates progressively decreased to trace and the aromatics increased substantially. The aromatic yield increased considerably as the pyrolysis temperature increased from 500°C to 650°C, but then decreased with yet further increase of pyrolysis temperature. Under optimal reaction conditions, the aromatic yields were 2.0 wt.% and 5.2 wt.% for the two lignins that had effective hydrogen indexes of 0.08 and 0.35.     

H2O2预氧化对负载铁制备污泥炭基催化剂效能的影响

以城市污水厂二沉池污泥为原料,考察了不同H_2O_2投加量下污泥预氧化对铁负载污泥形成前驱体及其热解后制得炭基催化剂性能的影响,研究了污泥预氧化对强化铁负载制备均一分散型污泥炭基催化剂的机理.结果表明,污泥预氧化促进了污泥细胞破解,降低了絮体颗粒粒径和表面Zeta电位,使铁负载量增加、铁活性位点在污泥载体上的分散性明显增强,形成炭基催化剂保持着高催化活性,其稳定性显著增加.对模拟含铬黑T染料废水的多相芬顿降解试验说明,当污泥预氧化H_2O_2投加量为2.25%时制备的炭基催化剂,其反应120 min后铬黑T的降解率为91%,略低于未预氧化时污泥炭基催化剂的降解效率(96%);但未预氧化炭基催化剂其反应后溶液中铁离子的溶出量(18.9%)远高于预氧化后形成的催化剂(2.5%),且后者循环3次对铬黑T的降解率仍可达到86%,表现出较强的稳定性.     

混凝气浮处理酸性大红3R的实验研究

实验研究了pH值、七水硫酸镁用量、十二烷基硫酸钠用量和气浮时间对酸性大红3R混凝气浮处理的影响。对比了混凝气浮和混凝沉淀处理酸性大红3R的效果。结果表明,pH值的调节和混凝剂的投加对酸性大红3R混凝气浮的处理效果影响较大,浮选剂对气浮效率有一定提高,杂质可在较短时间内浮出,混凝气浮起到一定深度处理效果。当混凝剂用量为647 mg/L,浮选剂用量为2 mg/L,pH值为11,气浮时间为3 min时,吸光度和色度去除率分别达到87.7％和84.9%。紫外-可见光谱图显示在pH为13时苯环、萘环或杂环不饱和体系会吸收—OH助色基团。     

废弃电路板中环氧树脂真空热解规律的研究

真空条件下,应用程序升温管式电炉对废弃电路板中环氧树脂热解规律进行了研究.考察了不同的热解终温(200～700 ℃)、升温速率(5～30 ℃/min)、真空度(以压力表征,3～30 kPa)及保温时间(10～150 min)对热解产物产率的影响.实验结果表明,热解终温是影响热解油产率最重要的因素;选择适当的热解终温(400～550 ℃)、升温速率(15～20 ℃/min)、真空度(15 kPa)及保温时间(30 min)有利于提高热解油产率.