Study on Biodegradable Starch/OMMT Nanocomposites for Packaging Applications

The thermoplastic starch (TPS) and nanocomposite(TPS/OMMT) was prepared with 15% carbamide, 15% ethanolamine and different contents of organic activated montmorillonite (OMMT) by twin-screw extruder with a 130 °C barrel temperature. Fourier transforms infrared spectroscopy and wide angle X-ray diffraction shown that the alkylamine in dodecyl benzyl dimethyl ammonium bromide could react with MMT via cation exchange reaction. After treated, the d(001)space distance of MMT increased from 1.5 to 1.7 nm. Scanning electron microscope revealed that the lower contents of OMMT could disperse well in the matrixes of TPS. The carbamide, ethanolamine and the OMMT could destroy the crystallization behavior of starch, but only the OMMT restrained this behavior for long-term storing. Mechanical properties investigation indicated that the tensile strength and modulus of TPS/OMMT nanocomposites were better than those of TPS, while the elongation at break was descended with the increasing of OMMT contents. When the content of OMMT was 4%, the tensile strength and modulus of TPS was improved from 4.2 and 42 MPa to 6.0 and 76 MPa, respectively.     

紫外分光光度法在水中阴离子表面活性剂标准样品研制中的应用

研究了阴离子表面活性剂水溶液的紫外吸收特性,并将研究结果用于阴离子表面活性剂水质标样的稳定性,均匀性和定值工作,简化了操作手续,获得了准确的分析结果。     

Investigations on boron levels in drinking water sources in China

To evaluate boron contamination of public drinking water in China, both dissolved and total boron contents in 98 public drinking water sources from 49 cities, 42 brands of bottled water samples from supermarkets in several cities, and 58 water samples from boron industrial area were measured by inductively coupled plasma-mass spectrometry (ICP-MS). Our experimental results showed that boron existed in public drinking water sources mainly in dissolved status with total concentrations ranging from 0.003 to 0.337 mg/L (mean = 0.046 mg/L). The mean boron concentrations in mineral and pure bottled water were 0.052 and 0.028 mg/L, respectively. The results obtained in this work showed that there was no health risk on view of boron in public drinking water sources and bottled water. In boron industrial area, boron concentrations in surface water and ground water were 1.28 mg/L (range = 0.007–3.8 mg/L) and 18.3 mg/L (range = 0.015–140 mg/L), respectively, which indicated that boron industry caused boron pollution in local water system.     

Sorption of organic contaminants by biopolymers: role of polarity, structure and domain spatial arrangement

Sorption behavior of hydrophobic organic contaminants (HOCs) (i.e., pyrene, phenanthrene and naphthalene) by native and chemically modified biopolymers (lignin, chitin and cellulose) was examined. Lignins (native and treated) showed nonlinear sorption for all compounds studied, emphasizing their glassy character. Chitins and celluloses had linear isotherms for phenanthrene and naphthalene, illustrating the dominance of partitioning, while pyrene yielded nonlinear isotherms. Sorption capacity (K(oc)) of HOCs was negatively correlated with the polarity [(O+N)/C] of the biopolymers. Aromatic and alkyl+aromatic C percentages, rather than alkyl C content, demonstrated a better correlation with K(oc) values, indicating the importance of aromatic structures for HOC affinity. Hydrophobicity (K(ow))-normalized K(oc) values decreased sharply with increasing percentage of O-alkyl C versus total aliphatic C (O-alkyl C/total aliphatic C) or with polar C/(alkyl+aromatic C) ratio of the biopolymers until their values reached 80% and 4, respectively, illustrating the effect of surrounding polar groups on reducing affinity for HOCs. Overall, the results of this study highlight the role of spatial arrangement of domains within biopolymers in sorption of HOCs, and point to sorbent properties, such as functionality, polarity and structure, jointly regulating the sorption of HOCs in biopolymers.     

建筑物消防系统可靠性分析

为评估建筑物消防系统的可靠性,首先将系统分为探测报警系统和灭火系统等部分,再用事件树法分析事故发生时消防系统不同部分的反应情况.通过贝叶斯理论及历史统计数据得到系统失效率的不确定性概率分布,建立消防系统可靠性随时间变化的数学模型; 用蒙特卡罗方法模拟求得系统可靠性的时间函数并对模型的不确定性参数进行敏感性分析.该方法将统计数据与经验公式、理论方法相结合,并利用蒙特卡罗方法处理模型中的不确定性,不仅能够有效估计消防系统的可靠性,还可对其他类似系统的可靠性进行分析,并通过敏感性分析为进一步减少估计的不确定性提出合理建议.     

多米诺效应的风险分析方法

介绍与分析多米诺效应的相关研究,并针对多米诺效应的定量风险分析,建立了从多米诺场景辨识到后果分析的多米诺效应定量分析方法.通过分析初始事故带来的物理效应对邻近设备的影响,计算了二次设备的损坏概率;分析了多米诺场景,计算了多米诺事故频率,并根据多米诺事故的后果得到个人风险和社会风险曲线.多米诺效应的风险是工业区一个潜在的严重风险,加强多米诺效应的研究对工厂和工业区的安全管理与规划都有重要意义.     

Improving artificial forest biomass estimates using afforestation age information from time series Landsat stacks

China maintains the largest artificial forest area in the world. Studying the dynamic variation of forest biomass and carbon stock is important to the sustainable use of forest resources and understanding of the artificial forest carbon budget in China. In this study, we investigated the potential of Landsat time series stacks for aboveground biomass (AGB) estimation in Yulin District, a key region of the Three-North Shelter region of China. Firstly, the afforestation age was successfully retrieved from the Landsat time series stacks in the last 40 years (from 1974 to 2013) and shown to be consistent with the surveyed tree ages, with a root-mean-square error (RMSE) value of 4.32 years and a determination coefficient (R ²) of 0.824. Then, the AGB regression models were successfully developed by integrating vegetation indices and tree age. The simple ratio vegetation index (SR) is the best candidate of the commonly used vegetation indices for estimating forest AGB, and the forest AGB model was significantly improved using the combination of SR and tree age, with R ² values from 0.50 to 0.727. Finally, the forest AGB images were mapped at eight epochs from 1985 to 2013 using SR and afforestation age. The total forest AGB in seven counties of Yulin District increased by 20.8 G kg, from 5.8 G kg in 1986 to 26.6 G kg in 2013, a total increase of 360 %. For the persistent forest area since 1974, the forest AGB density increased from 15.72 t/ha in 1986 to 44.53 t/ha in 2013, with an annual rate of about 0.98 t/ha. For the artificial forest planted after 1974, the AGB density increased about 1.03 t/ha a year from 1974 to 2013. The results present a noticeable carbon increment for the planted artificial forest in Yulin District over the last four decades.     

Investigation of organic pollutants in wastewater-irrigated soil and its DNA damage and oxidative damage on mice

This work aimed to determine the DNA and oxidative damage on mice by mixtures of organic contaminants in wastewater-irrigated soil, in order to assess their usefulness as markers for this kind of pollution. Wastewater-irrigated soil samples in the vicinity of an industrial area in Tangshan, China were collected, and soil irrigated by underground water satisfying drinking water standards was used as control group. Organic pollutants were extracted from the soil using ultrasonic oscillation, and analyzed by gas chromatography–mass spectrometry (GC-MS). Meanwhile, DNA damage on mice was determined by the Comet assay after oral gavage with the extracts, and changes in total superoxide dismutase (T-SOD) activity, glutathione peroxidase glutathione, GSH peroxidase (GSH-P_X) activity and malondialdehyde content in serum of mice were investigated. The number of categories and concentrations of organic compounds in the wastewater-irrigated soil is more than those in groundwater-irrigated soil, as identified by the GC-MS. The toxicity test of mice showed that compared with reagent control group, the activities of T-SOD and GSH-P_X decreased; the tailing rate of peripheral blood lymphocyte of mice increased and was more than that of the control group. This shows that mammalian toxicity end points can be used to determine the joint toxicity of organic pollutants in soil. When there is no means to identify each and every pollutant in soil, it is feasible to evaluate the combined effects of various pollutants to determine the extent to which the soil is polluted.     

高燃速推进剂成型过程中的安全性分析

为研究高燃速推进剂成型过程中的安全性,根据配方组成和工艺条件,对其压伸过程的热点形成因素进行了理论分析,并采用热-结构耦合方法,选择有限元软件ABAQUS对其不同工艺条件下的压伸过程进行了建模分析。结果表明:在压伸过程中,物料在收缩段承受的压力最大,且温度变化显著。物料中残留的气泡是影响高燃速推进剂压伸成型过程安全性的主要因素。当物料中有残留气泡时,随压伸过程所加的载荷不同,气泡的最高温度会显著上升,载荷为15MPa时,气泡的最高温度可达139.3℃;载荷为20 MPa时,温度可达264.2℃。