This paper describes the experimental study of dioxins removal from flue gas from a co-combustion municipal solid waste and coal incinerator by means of a fluidized absorption tower and a fabric filter. A test rig has been set up. The flow rate of flue gas of the test rig is 150-2000 m3/h. The system was composed of a humidification and cooling system, an absorption tower, a demister, a slurry make-up tank, a desilter, a fabric filter and a measurement system. The total height of the absorption tower was 6.5m, and the diameter of the reactor pool was 1.2 m. When the absorbent was 1% limestone slurry, the recirculation ratio was 3, the jet rate was 5-15 m/s and the submerged depth of the bubbling pipe under the slurry was 0.14 m, the removal efficiency for dioxins was 99.35%. The concentration of dioxins in the treated flue gas was 0.1573 x 10(-13)kg/Nm3 and the concentration of oxygen was 11%. This concentration is comparable to the emission standards of other developed countries. 相似文献
An intensive investigation was conducted to study the distribution of polycyclic aromatic hydrocarbons （PAHs）, to show firstly the level of pollution in the agricultural areas and analyses specifically the status of soil polluted by these persistent pollutants in some locations of Xiamen region. Soil samples collected from Jiulong agricultural catchment have been analysed for 16 PAH compounds, using gas chromatography flame ionization detection in order to determine the level of selected PAH components and to identify the factors that may control their distribution and persistence in the area. The main PAHs found in soil samples were the low molecular weight. The total PAHs detected in soil samples ranged from 0.50 to 0.95 μg/g soil. The highest values of PAHs were significantly detected in the orange tree leaves, which range from 236.1 to 249.3 μg/g soil showing recent atmospheric inputs of these volatile pollutants. The distribution of PAHs in vegetable were monitored and indicating that the concentration were high and ranged from 8.24 to 58.87 μg/g. Other sediment samples were also collected and analysed from urban sewage （5.26 μg/g dw）, aquacultural （0.52 μg/g dw） and industrial areas （from 0.62 to 2.09 μg/g dw）, during this investigation. The contamination of Jiulong river estuary and Xiamen Western Sea by PAHs has been then widely justified by wastcwatcr discharges and soil runoffs from these areas. The results, therefore, provide important information on the current contamination status caused by the atmospheric transport and point to the need for urgent actions to stop the release of these hydrocarbons to the environment. The necessity of implementing systematic monitoring of PAHs is also emphasized. 相似文献
The sigma (SIG) coordinate system in ocean circulation simulation models results inevitably in horizontal pressure gradient error. This problem also emerges in models of deep lakes or reservoirs with the same characteristics of underwater terrain mutation. SIG coordinates reflect vertical relative stratification but cannot be used to calculate horizontal pressure gradient force in places with drastic topographic changes; this results in vertical water temperature and circulation errors. In deep lakes or reservoirs, differences in water density caused by the temperature difference between upper and lower water bodies is the primary cause of thermal stratification phenomena. Lake Mead was used as a case study on steep topography based on Environmental Fluid Dynamics Code (EFDC) model in this study. SIG coordinates result in close agreement between the calibrated temperature time series at the top and middle water layers, but disparity in the bottom water layer. The error emerges in the horizontal pressure gradient error due to the SIG coordinate transformation. Neither increasing the vertical resolution nor adjusting the horizontal viscosity coefficient resolve this error. We test the sigma-zed (SGZ) coordinate which combines Z coordinate and SIG coordinate as a replacement for the SIG coordinate to find that they effectively reduce the model’s runtime and simulation efficiency. The vertical temperature distribution in SGZ coordinate mode is more accurate than the distribution in SIG coordinate mode. The Navier-Stokes horizontal gradient and advection diffusion equation results under SIG coordinates are very sensitive to the pressure gradient. The replacement also enhances resolution near the thermocline, facilitates reclosing of the water bottom and the equal sigma surface, lends significant advantages in terms of vertical temperature in the simulation for local deep water with steep terrain, and shortens runtime for 0.14 h. SGZ mixed coordinates are recommended in the simulation of deep lakes or reservoirs wherein the underwater topography is large (with abundant continuous deep trenches or reefs).
Environmental Science and Pollution Research - Chinese industrial structure is characterized by a large proportion of industries with high energy consumption and high pollution, such as coal,... 相似文献
