Dehalogenation Potential of Municipal Waste Incineration Fly Ash

BACKGROUND, AIMS AND SCOPE: In the first part of this paper the main principles which control the dehalogenation of polychlorinated aromatic compounds on municipal waste incineration fly ash (MWI-FA) have been discussed and the model fly ash of similar dehalogenation activity has been proposed. Even if both systems show comparable dehalogenation properties, the main question concerning the postulated identical reaction mechanism in both cases is left unanswered. The other very important point is to what extent is this dechlorination mechanism thermodynamically controlled. The same problem is often discussed in the literature also for the de novo synthetic reactions. From the data it is clear that metallic copper plays a decisive role in the mechanism of the dehalogenation reaction. Although the results reported in the first part strongly support the idea that copper acts in this dechlorination as the reaction component, in contrast to its generally accepted catalytic behaviour, we believed that additional support for this conclusion can be obtained with the help of a thermodynamic interpretation of the mechanism of the reaction. RESULTS AND DISCUSSION: The pathways of hexachlorobenzene dechlorination on MWI-FA and model fly ash were studied in a closed system at 260-300 degrees C under nitrogen atmosphere. These pathways were the same for both systems, with the following prevailing sequences: hexachlorobenzene --> pentachlorobenzene --> 1,2,3,5-tetrachlorobenzene --> 1,3,5-trichlorobenzene --> 1,3-dichlorobenzene. Thermodynamic calculations were carried out by using the method of minimization total Gibbs energy of the whole system. In the calculations, the following reaction components were taken into account: all gaseous chlorinated benzenes, benzene, hydrogen chloride, a gaseous trimer Cu3Cl3, and also Cu2O and CuCl2 as solid components. The effect of the reaction temperature and the amount of copper and water vapour were considered as well. The effect of reaction temperature was determined from the data calculated for the 500 to 750 K temperature region. The effect of the initial composition was determined for the molar amounts of copper = 0.01-3 moles and water vapour = 0.2 to 3 moles per mole of chlorobenzene isomer CONCLUSIONS: The results of hexachlorobenzene dechlorination by MWI-FA and model fly ash under comparable reaction conditions allow us to conclude that both dechlorinations proceed via the same dechlorination pathways, which can be taken as an evidence of the identical dehalogenation mechanism for both systems. The relative percentual distribution of the dehalogenated products depends on the temperature, but not on the initial amount of water vapour or copper metal. On the other hand, the initial amount of copper substantially affects the conversion of the dehalogenation as well as the molar ratio of Cu3Cl3 to HCl in the equilibrium mixture. Comparison of the experimental with thermodynamic results supports the idea that dehalogenation reactions are thermodynamically controlled. RECOMMENDATIONS AND OUTLOOK: Thermodynamic analysis of the dehalogenation reactions may prove useful for a wide range of pollutants. The calculations concerning polychlorinated biphenyls and phenols are under study.     

A straightforward synthesis in aqueous medium of enantiomerically enriched S(-)2,2′-dihydroxy-1,1′-binaphthyl

Chiral, atropisomeric 2,2'-dihydroxy-1,1'-binaphthyl has been extensively used to direct asymmetric processes. Its key role in asymmetric catalysis has spurred efforts to synthesize it in the optically pure form, but the reported synthetic routes have a significant environmental impact. In an aqueous peroxydase-cyclodextrin system the oxidative coupling of 2-naphthol took place very rapidly in almost quantitative yield and resulted in an enantiomeric excess. This one-pot synthesis do not require any organic solvents and oxidising metal cations.     

Volatile metabolites from indoor molds grown on media containing wood constituents

Since volatile mold metabolites are used for the detection of mold growth in buildings, it was interesting to determine whether different indoor mold species show different affinity for the major components of wood, a common building material. Growth and volatile metabolites were studied when Aspergillus versicolor, Penicillium chrysogenum, and P. palitans were grown on laboratory substrates containing the major wood constituents cellulose, xylan and lignin. Microbial volatile organic compounds (MVOCs) were characterized by thermal desorption/gas chromatography/mass spectroscopy. Growth and volatile metabolites varied considerably and there appeared to be complementary substrate specificities for P. chrysogenum, and P. palitans grown on cellulose and xylan. The failure of A. versicolor to produce characteristic MVOCs when grown on media containing wood constituents suggests that systems using volatile metabolites to detect microbial growth in buildings may be fundamentally unreliable for the detection of this species.     

Chemical degradation and biodegradability increase

The mill waste water holds a large amount of polyphenols, preventing the biodegradation processes because of their inhibitory action on microbial growth. Thus, its disposal represents an environmental problem for the great olive oil producing countries in the Mediterranean area. In this work, we present the preliminary results from the application of a photo-oxidative process on mill waste water to evaluate the organic matter degradation potential and the biodegradability of the treated residue. The total organic carbon is reduced up to 35% after 6 hours but the cost-effectiveness is unfavourable. In contrast, the aim of toxicity reduction is less expensive and shows good applicable chances; after 2 h, the polyphenols concentration drops by 60%.     

Environmental impacts of coastal aquaculture in eastern mediterranean bays the case of astakos gulf,Greece

GOAL, SCOPE AND BACKGROUND: Over the last decade Greece has become a leading country in the EU as concerns the cage farming of seabream and seabass. A strong debate has risen, however, about the environmental impacts of aquacultures in the coastal areas. The present paper deals with this problem and it is based on measurements of physico-chemical parameters in the water column, particulate matter and sediments in the area of Astakos Gulf, a coastal embayment in western Greece where three big fish farms are currently operating. METHODS: Water samples were collected by using Hydro-Bios sampling bottles, whereas a prototype sediment trap was installed under a fish cage for the collection of particulate matter. Temperature, dissolved oxygen, pH and salinity were measured in situ using portable equipment. Nutrients were determined by standard spectrophotometric methods. Trace metals were determined by Atomic Absorption Spectrometry. Dissolved organic carbon was determined by a Shimadzu 5000A carbon analyzer, whereas organic carbon in sediments was determined titrimetrically. RESULTS AND DISCUSSION: No clear eutrophication incidents have been identified, although the water column near the fish farms was enriched in nutrients and organic carbon. A sludge 'blanket' covers considerable parts of the seabed and is enriched in colloidal organic carbon and trace metals (Cd, Cu, Fe and Zn) that come from unused fish food. The biodegradation of this sludge leads to the development of anoxic conditions followed by the formation of undesirable gases, precipitation or remobilization of metals and the extinction of benthic fauna. CONCLUSION: The operation of fish farms at the coastal area of Astakos Gulf, and probably in similar Mediterranean gulfs, affects the marine environment, particularly in the vicinity of the cages. The most significant influence concerns the near-bottom water layer. The environmental impacts depend on the amount of food given to fishes, the mode of feeding, the fish density in cages, the annual production and the years of unit operation. The hydrology and the geomorphology of the area are also critical factors for its environmental quality. RECOMMENDATION AND OUTLOOK: The success of the fish-farming sector in the Mediterranean is accompanied by environmental and, in some extents, by social and marketing problems. These problems, derived from the rapid development of fish farming, can be solved only through an integrated management, using methods such as environmental impact assessment, risk assessment, economic evaluation, vulnerability assessments, resource accounting, cost-benefit analysis and outcome-based monitoring.     

Investigation of the complexation of metal-ions by strong ligands in fresh and marine water

SCOPE: The detection and investigation of metal ions bound in strong complexes in natural waters is a difficult task, due to low concentration of the metal ions themselves, and also of the strong ligands, which, moreover, are often not of a well-defined composition. Here, a method is proposed for the investigation of the speciation of metal ions in natural waters. OBJECTIVE AND METHOD: It is based on the sorption of metal ions on strongly sorbing ion exchange resins, i.e. complexing resins. For this reason the method is called Resin Titration. It has been shown in previous investigations that the concentration of metal ion totally sorbed by a particular resin, and its reaction coefficient in the solution phase in the presence of the resin, can be determined from the sorption data using a simple relationship. Here, a data treatment (the Ruzic linearization method) is proposed for also determining the concentration of the ligands responsible for the complex in equilibrium with the resin. RESULTS: The method was applied to data obtained by Resin Titration of a freshwater and a seawater. Copper(II) and aluminium(III) were considered, using Chelex 100 as a titrant, due to its strong sorbing properties towards these metal ions. The results were: the total metal concentration in equilibrium with the resin, the side reaction coefficients, and the concentration of ligands. In all these cases the ligands forming very strong complexes were found to be at concentration lower than that of the metals. CONCLUSION: The Ruzic linearization method allows the determination of the concentration of the ligands forming very strong complexes in equilibrium with Chelex 100. The reaction coefficient was better determined by the calculation method previously proposed for RT. The ligands responsible for the strong complexes were found to be at low concentration, often lower than that of the metal ions considered. The metal in the original sample is partly bound to these ligands, since the complexes are very strong. Only a part of the metal is linked to weaker ligands, or free.     

Traffic congestion and ozone precursor emissions in Bilbao (Spain)

GOAL. SCOPE. BACKGROUND: In urban environments, the measured levels of ozone are the result of the interaction between emissions of precursors (mainly VOCs and NOx) and meteorological effects. In this work, time series of daily values of ozone, measured at three locations in Bilbao (Spain), have been built. Then, after removing meteorological effects from them, ozone and traffic data have been analyzed jointly. The goal was to identify traffic situations and link them to ozone levels in the area of Bilbao. METHODS: To remove meteorological effects from the selected ozone time series, the technique developed by Rao and Zurbenko was used. This is a widely used technique and, after its application, the fraction obtained from a given ozone time series represents an ozone forming capability attributable to emissions of precursors. This fraction is devoid of any meteorological influence and includes only the apportion of periodicities above 1.7 years. In the case of Bilbao, the ozone fractions obtained at three locations have been compared on that time scale with traffic data from the area. RESULTS AND DISCUSSION: For the 1993-1996 period, a regression analysis of the ozone and traffic fractions due to periodicities above 1.7 years (long-term fractions), shows that traffic is the main explanatory factor for ozone with R2 ranging from 0.916 to 0.996 at the three locations studied. Analysis of these longterm fractions has made it possible to identify two traffic regimes for the whole area, associated to different profiles of ozone forming capability. The first one favors low ozone forming capability, and is associated with a situation of fluent traffic. The second one shows high ozone forming capability and represents congestion. Joint analysis of raw data of ozone and traffic do not show any clear pattern due to the strong masking effects that seasonal-meteorological effects (mainly radiation) have on the measured ozone signal. If only immission data of ozone are available, as in this case, a comparison between ozone and traffic can only be made on the long-term time scale, since that is the only fraction embedded in the ozone time series that can exclusively be attributed to emissions of precursors. This fact stresses the need to study the different fractions embedded in the time series of ozone measured levels separately. CONCLUSION: Though the coefficients obtained in the regression are only valid for the 1993-1996 period, these traffic regimes represent long-term targets (congestion or fluent traffic) that can inspire policies for a joint management of the traffic and pollution by ozone in the area of Bilbao beyond that period. RECOMMENDATIONS AND OUTLOOK: The results of this work show the need of a joint management of ozone and traffic in Bilbao. Since an accurate knowledge of traffic was not available, the use of emission factors to relate traffic and actual ozone levels has not been possible. For this reason, this study has focused on the long-term fractions of traffic and ozone. In the future, if a more accurate knowledge of traffic is available, it will be possible to find relationships between traffic and ozone on all time scales.     

Buchbesprechungen

Ohne Zusammenfassung     

Methane fluxes from tundra soils and snowpack in the maritime Antarctic

Methane fluxes were measured from three exposed tundra sites and four snowpack sites on the Fildes Peninsula in the maritime Antarctic in the summertime of 2002. The average fluxes at two normal tundra sites were −15.3 μg m⁻² h⁻¹ and −14.3 μg m⁻² h⁻¹, respectively. The fluxes from tundra site with fresh penguin dropping addition showed positive values with the average of 36.1 μg m⁻² h⁻¹, suggesting that the deposition of fresh droppings greatly enhanced CH₄ emissions from the poor Antarctic tundra during penguin breeding periods. The summertime variation in CH₄ flux was correlated with surface ground temperature and the precipitation. The correlation between the flux and PT₀, which is the product of the precipitation and surface ground temperature, was quite strong. The diurnal cycle of CH₄ flux from the tundra soils was not obtained due to local fluky weather conditions. The fluxes through four snowpack sites were also obtained by the vertical CH₄ concentration gradient and their average fluxes were −46.5 μg m⁻² h⁻¹, −28.2 μg m⁻² h⁻¹, −46.4 μg m⁻² h⁻¹ and −17.9 μg m⁻² h⁻¹, respectively, indicating that tundra soils under snowpack also consume atmospheric CH₄ in the maritime Antarctic; therefore these fluxes could constitute an important part of the annual CH₄ budget for Antarctic tundra ecosystem.     

Growth of Plants on TBT-contaminated Harbour Sludge and Effect on TBT Removal (10 pp)

Background Worldwide, large amounts of sediments have to be dredged annually from waterways and harbours. These sediments are sometimes polluted with a variety of toxic compounds. In some countries, including Belgium, the load with the biocide tributyltin (TBT) from ship coatings prohibits the dumping of harbour sludge into the sea. Land-based dumping is a commonly used alternative. Objective This research investigated the feasibility to use land-deposited harbour sludge for plant production. In a field trial, the growth of 38 more or less salt-tolerant plant species on low and high TBT-contaminated sediments was studied. The elimination of TBT from sludge with and without vegetation was compared. The uptake of TBT and its degradation products di- and monobutyltin (DBT and MBT) into harvest products under field conditions was determined. - Experimental Set-up. Sediments dredged in May 2003 from the brackish waters of the port of Antwerp were analysed in the laboratory for soil texture, pH, electroconductivity, sodium, magnesium, potassium, calcium, ammonium, nitrate, total nitrogen, chloride, sulphur and the organotins TBT, DBT and MBT. The sediments were lagooned for one year to dewater, desalinate and improve their structure. Salt-tolerant domestic and wild plants were selected and sown in May 2004. In August 2004, plants were harvested and the produced biomass was determined. Samples were taken from vegetated and non-vegetated top and bottom sediments and from plants growing above soil and analysed for TBT, DBT and MBT. Results The fresh sediments showed a good supply with nutrients and a neutral pH, but were rather saline (EC 14 mS cm-1 of the saturated paste extract). The salinity decreased to 3.7 mS cm-1 during lagoonation. The high and the low contaminated sediment had initially 43 and 1.6 mg TBT kg-1 dry weight, respectively. Besides TBT, several other contaminants were present in the sediments at critical levels. The biomass production of the plant species from the field trial ranged from 0.2 to 13 tons dry mass per hectare. Plants performing excellently were barley, sorghum, rape seed, a clover/grass mix and reed. If at all, a positive influence of TBT on plant growth was seen. TBT was degraded significantly faster (>40%) below barley. The uptake of TBT, DBT and MBT into stem and leaves of reed, grass and clover was very low, but measurable and not related to concentrations in soil. No uptake of TBT or its metabolites into corn of barley was found. Discussion This study confirmed former results: the toxicity of TBT to higher plants is low, and even high levels in soils would not be a hindrance for crop production. The removal of TBT seemed to be increased by both lagooning and plant growth, although the target values for sea dumping in use in certain European countries were not reached. A plausible explanation for the faster degradation of TBT under vegetation is that oxygen is a limiting factor, and plants dewater the soil, thus aerating it. The uptake of the organotins TBT, DBT and MBT into harvest products is probably due to attached soil particles. Conclusions To summarize, barley was the optimal species: it grew very well despite the salinity of the dredged sediments, it had a significantly positive effect on TBT removal; it showed no measurable uptake of TBT or the other butyltins into the harvested product; and it is a cash crop well established in European agriculture. Outlook The amounts of dredged sediments are high, and good soils are becoming increasingly rare. The feasibility of using dredged sediments for non-food production, such as energy crops, should be investigated by a critical risk assessment.