基于资源环境承载力的全国造纸工业类型区划分研究

本文从造纸行业特征、资源消耗、污染物排放等方面入手,结合区域资源环境承载力,分析行业发展可能带来的环境污染问题.分析造纸行业发展与其所需主要资源间的空间布局关系,明确选定行业发展的资源、环境和生态制约条件.结合造纸行业特点,从环境约束、生态约束和资源约束入手,构建其环境管理类型区划分的指标体系;采用层次分析法、灰色定权聚类分析等方法对分区数据进行必要处理,采用二维判断矩阵法等方法进行环境管理类型区划分,对实施针对造纸行业分区域、分类别、差别化的环境管理提供了决策依据和方法基础.     

Detection of Viruses in Coastal Seawater Using <Emphasis Type="Italic">Mytilus Galloprovincialis</Emphasis> as an Accumulation Matrix

The purpose of this study was to demonstrate that shellfish can be used to detect enteric viruses in marine waters where they are present at very low concentrations. Aqua-cultured mussels were placed in the sea just off the mouth of a drainage channel affected by human and animal faecal contamination. Samples were taken from the channel, the sea and the mussels at intervals over two 4-week periods. The samples were tested to verify the presence of both rotaviruses and E. coli. Rotaviruses were detected by Real Time-PCR, typed by multiplex PCR and subsequently sequenced. E. coli was enumerated in water matrices by a filtering method and in mussels by the MPN method. The presence of E. coli in the examined matrices demonstrates contamination of faecal origin throughout the studied environments. Rotaviruses were recorded in channel waters, but not in sea water. In both experiments, rotaviruses were detected in mussels 21 and 28 days after being placed in the sea water off the channel mouth. The use of mussels thus enabled the detection of rotaviruses in waters where the high dilution rendered direct investigation impossible. This study indicates that mussels can be used in marine virological surveillance programs.     

上海市工业固体废物处理处置现状分析

详细分析了上海市一般工业固体废物及工业危险废物的产生及处理处置现状,提出:一般工业固废主要以资源化利用为主,危废处置企业实行末位淘汰,实现清洁生产;加强国家提倡的"三位一体"综合处理项目建设,实现集中处理、集中监管,降低运营成本;加强工业危废产生企业申报登记及转移的网络信息化管理,杜绝监管盲区。     

Greenhouse gas mitigation and offset options for suckler cow farms: an economic comparison for the Swiss case

We assessed the economic suitability of 4 greenhouse gas (GHG) mitigation options and one GHG offset option for an improvement of the GHG balance of a representative Swiss suckler cow farm housing 35 Livestock units and cultivating 25 ha grassland. GHG emissions per kilogram meat in the economic optimum differ between the production systems and range from 18 to 21.9 kg CO₂-eq./kg meat. Only GHG offset by agroforestry systems showed the potential to significantly reduce these emissions. Depending on the production system agroforestry systems could reduce net GHG emissions by 66% to 7.3 kg CO₂-eq./kg meat in the most intensive system and by 100% in the most extensive system. In this calculation a carbon sequestration rate of 8 t CO₂/ha/year was assumed. The potential of a combination of the addition of lipids to the diet, a cover of the slurry tank and the application of nitrification inhibitors only had the potential to reduce GHG emissions by 12% thereby marginal abatement costs are increasing much faster than for agroforestry systems. A reduction of the GHG emissions to 7.5 kg CO₂-eq./kg meat—possible with agroforestry only—raised costs between 0.03 CHF/kg meat and 0.38 CHF/kg meat depending on the production system and the state of the system before the reduction. If GHG emissions were reduced maximally average costs ranged between 0.37 CHF/kg meat, if agroforestry had the potential to reduce net GHG emissions to 0 kg CO₂-eq., to 1.17 CHF/kg meat if also other options had to be applied.     

Multi-process and multi-pollutant control technology for ultra-low emissions in the iron and steel industry

The iron and steel industry is not only an important foundation of the national economy, but also the largest source of industrial air pollution. Due to the current status of emissions in the iron and steel industry, ultra-low pollutant emission control technology has been researched and developed. Liquid-phase proportion control technology has been developed for magnesian fluxed pellets, and a blast furnace smelting demonstration project has been established to use a high proportion of fluxed pellets (80%) for the first time in China to realize source emission reduction of SO₂ and NO_x. Based on the characteristics of high NO_x concentrations and the coexistence of multiple pollutants in coke oven flue gas, low-NO_x combustion coupled with multi-pollutant cooperative control technology with activated carbon was developed to achieve efficient removal of multiple pollutants and resource utilization of sulfur. Based on the characteristics of co-existing multiple pollutants in pellet flue gas, selective non-catalytic reduction (SNCR) coupled with ozone oxidation and spray drying adsorption (SDA) was developed, which significantly reduces the operating cost of the system. In the light of the high humidity and high alkalinity in flue gas, filter materials with high humidity resistance and corrosion resistance were manufactured, and an integrated pre-charged bag dust collector device was developed, which realized ultra-low emission of fine particles and reduced filtration resistance and energy consumption in the system. Through source emission reduction, process control and end-treatment technologies, five demonstration projects were built, providing a full set of technical solutions for ultra-low emissions of dust, SO₂, NO_x, SO₃, mercury and other pollutants, and offering technical support for the green development of the iron and steel industry.     

乳状液膜法处理含氨基J酸工业废水的初步研究

采用乳状液膜分离技术处理含氨基Ｊ酸工业废水,研究了表面活性剂种类和浓度、流动载体种类、内相ＮａＯＨ的浓度和外相酸度等因素对分离效率的影响．结果表明,采用ＬＭＡ－１（３ｇ／１００ｍｌ煤油）、ＴＯＡ（２ｍｌ／１００ｍｌ煤油）和１０％ＮａＯＨ的液膜时,分离效率可达６０％以上;油相多次重复使用时,其分离效率基本不变．     

几种难降解有机废水的光化学处理研究

采用日光和中压汞灯为光源,分别在充空气、加入Ｈ２Ｏ２或ＴｉＯ２等半导体催化剂条件下,对几种难降解的有机废水进行了光化学处理研究。结果表明：石化和焦化废水中挥发酚,油和ＣＯＤ的去除率分别为８６．３％－１００％,３９．８％－９７．８％,２６．４％－６０％,几种偶氮染料水溶液的脱色率、ＣＯＤ去除率分别为８０．０％－１００％,４８．０％－７５．０％,还测定了苯酚的降解产物,讨论了影响光解的要素和苯酚的降解     

气相色谱／质谱（GC／MS）联用在我国大气有机污染监测中的应用

概述ＧＣ／ＭＳ联用在我国大气有机污染监测中的应用，介绍大气中有机污染物，如多环芳烃、硝基多环芳烃、多氯二苯并二恶英、多氯二苯并呋喃、碳氢化合物、苯系物、恶臭、有机硫化合物、多组分有机污染物的测定。     

小诺霉素发酵废水好氧生物处理试验研究

对具有强抑制性污染物的抗生素小诺霉素发酵废水，选择活性污泥、粉末活性炭（ＰＡＣＴ）、纯氧曝气等３种好氧生物处理法进行了比较试验。根据实验结果，小诺霉素发酵废水的生物降解呈抑制动力学，采用Ｍａｒｑｕａｒｔ方法对动力学模式进行参数估计。ＰＡＣＴ能够有效地降低降解过程中微生物受到的抑制作用，从而明显地改善了生物处理过程动力学。     

污染物的微生物毒性检验

从文献报导的１０几种污染物毒性试验方法中，选择了脱氢酶活性、Ｍｉｃｒｏｔｏｘ毒性、微生物呼吸率、以及降解动力学等４种方法，系统地比较，研究了其表示污染物对微生物的毒性效应的灵敏性，准确性，可靠性和实用性，研究结果应用于焦化废水、染化废水与黄浦江水样的检验表明，ＭＴＸ方法能最好地反映污染物的微生物毒性，且操作简便，费时少，数据的解释也最为方便。