Glass fiber supported BiOI thin-film fixed-bed photocatalytic reactor for water decontamination under solar light irradiation

BiOI powder has been proved to be an efficient photocatalyst, but the difficulty in removing it from water after reaction limits its application in real water treatment. To solve this problem,a thin-film fixed-bed reactor(TFFBR) was set-up by developing a BiOI thin film on glass fiber cloth(GFC). The composition and structure of the as-prepared films were characterized with X-ray diffraction, X-ray photoelectron spectroscopy, field emission microscopy, transmission electron microscopy and Fourier transform infrared spectroscopy. The BiOI thin film was made by painting a silica sol containing BiOI on GFC, which could be tailored to desired sizes to accommodate the TFFBR. The mass of BiOI on the GFC increased with the number of iterations of the painting process. SiO2 sol glued the BiOI particles tightly onto the GFC,making the thin film strong enough to resist fluid flushing in the TFFBR. The photocatalytic activity of the BiOI thin film was investigated by degrading bisphenol A(BPA) under simulated sunlight. Ninety eight percent of BPA(20 mg/L in 2 L) was degraded by the BiOI thin film sample of seven layers(GFC-7) on the TFFBR within 8 hr irradiation. The GFC-7 displayed good photocatalytic ability toward artificial sewage containing BPA in a wide pH range(5–9),and also demonstrated excellent durability and reusability. The working conditions were optimized and it was found that the thickness of the fluid film and residence time over the thin film were key factors affecting the photocatalytic efficiency.     

The simultaneous removal of ammonium and manganese from surface water by MeOx: Side effect of ammonium presence on manganese removal

Manganese and ammonium pollution in surface water sources has become a serious issue.In this study, a pilot-scale filtration system was used to investigate the effect of ammonium on manganese removal during the simultaneous removal of ammonium and manganese from surface water using a manganese co-oxide filter film(MeO_x ). The results showed that the manganese removal efficiency of MeO_x in the absence of ammonium was high and stable, and the removal efficiency could reach 70% even at 5.5 °C. When the influent ammonium concentration was lower than 0.7 mg/L, ammonium and manganese could be removed simultaneously. However, at an ammonium concentration of 1.5 mg/L, the manganese removal efficiency of the filter gradually decreased with time(from 96% to 46.20%). Nevertheless, there was no impact of manganese on ammonium removal. The mechanism by which ammonium negatively affected manganese removal was investigated, demonstrating that ammonium affected manganese removal mainly through two possible mechanisms. On one hand, the decreased p H caused by ammonium oxidation was unfavorable for the oxidation of manganese by MeO_x ; on the other hand, the presence of ammonium slowed the growth of new MeO_x and retarded the increase in the specific surface area of the Me Ox-coated sand, and induced changes in the morphology and crystal structure of Me Ox. Consequently, the manganese removal efficiency of the filter decreased when ammonium was present in the inlet water.     

Temporal variability of visibility and its parameterizations in Ningbo, China

Simultaneous and continuous measurements of visibility, meteorological parameters and air pollutants were carried out at a suburban site in Ningbo from June 1, 2013 to May 31,2015. The characteristics of visibility and their relationships with air pollutants and meteorological factors were investigated using multiple statistical methods. Daily visibility ranged from 0.6 to 34.1 km, with a mean value of 11.8 km. During the 2-year experiment,43.4% of daily visibility was found to be less than 10.0 km and only 9.2% was greater than 20.0 km. Visibility was lower in winter with a frequency of 53.4% in the range of 0.0–5.0 km.Annual visibility had an obvious diurnal variation, with the lowest and highest visibility being 7.5 km at approximately 06:00 local time and 15.6 km at approximately 14:00 local time, respectively. Multiple correspondence analysis(MCA) indicated that the different ranges of visibility were significantly affected by different levels of pollutants and meteorological conditions. Based on the analyses, visibility was found to be an exponential function of PM_(2.5) concentrations within a certain range of relative humidity. Thus, nonlinear models combining multiple linear regressions with exponential regression were subsequently developed using the data collected from June 2014 to May 2015, and the data from June 2013 to May 2014 was used to evaluate the performance of the model. It was demonstrated that the derived models can quantitatively describe the relationships between visibility, air quality and meteorological parameters in Ningbo.     

Changes in distribution and microstructure of bauxite residue aggregates following amendments addition

Bauxite residue is a highly alkaline byproduct which is routinely discarded at residue disposal areas. Improving soil formation process to revegetate the special degraded lands is a promising strategy for sustainable management of the refining industry. A laboratory incubation experiment was used to evaluate the effects of gypsum and vermicompost on stable aggregate formation of bauxite residue. Aggregate size distribution was quantified by fractal theory, whilst residue microstructure was determined by scanning electron microscopy and synchrotron-based X-ray micro-computed tomography. Amendments addition increased the content of macro-aggregates( 250 μm) and enhanced aggregate stability of bauxite residue. Following gypsum and vermicompost addition, fractal dimension decreased from 2.84 to 2.77, which indicated a more homogeneous distribution of aggregate particles. Images from scanning electron microscopy and three-dimensional microstructure demonstrated that amendments stimulate the formation of improved structure in residue aggregates. Pore parameters including porosity, pore throat surface area, path length, and path tortuosity increased under amendment additions. Changes in aggregate size distribution and microstructure of bauxite residue indicated that additions of gypsum and vermicompost were beneficial to physical condition of bauxite residue which may enhance the ease of vegetation.     

Highly catalytic activity of Mn/SBA-15 catalysts for toluene combustion improved by adjusting the morphology of supports

Rod-like, hexagonal and fiber-like SBA-15 mesoporous silicas were synthesized to support MnO_x for toluene oxidation. This study showed that the morphology of the supports greatly influenced the catalytic activity in toluene oxidation. MnO_x supported on rod-like SBA-15(R-SBA-15) displayed the best catalytic activity and the conversion at 230°C reached more than 90%, which was higher than the other two catalysts. MnO_x species consisted of coexisting MnO_2 and Mn_2O_3 on the three kinds of SBA-15 samples. Large amounts of Mn_2O_3 species were formed on the surface and high oxygen mobility was obtained on MnO_x supported on R-SBA-15, according to the H_2 temperature programmed reduction(H_2-TPR)and X-ray photoelectron spectroscopy(XPS) results. The Mn/R-SBA-15 catalyst with greater amounts of Mn_2O_3 species possessed a large amount of surface lattice oxygen, which accelerated the catalytic reaction rate. Therefore, the surface lattice oxygen and high oxygen mobility were critical factors on the catalytic activity of the Mn/R-SBA-15 catalyst.     

One-step synthesis of Cu(II) metal–organic gel as recyclable material for rapid, efficient and size selective cationic dyes adsorption

Efficient removal of non-biodegradable and hazardous dyes from wastewater remains a hot research topic. Herein, a rationally designed a Cu(Ⅱ)-based metal–organic gel(Cu-MOG) with a nanoporous 3 D network structure prepared via a simple one-step mixing method was successfully employed for the removal of cationic dyes. The Cu-MOG exhibited high efficiency, with an adsorption capacity of up to 650.32 mg/g, and rapid adsorption efficiency, with the ability to adsorb 80% of Neutral Red within 1 min. The high adsorption efficiency was attributed to its large specific surface area, which enabled it to massively bind cationic dyes through electrostatic interaction, and a nanoporous structure that promoted intra-pore diffusion. Remarkably, the Cu-MOG displayed size-selective adsorption, based on adsorption studies concerning dyes of different sizes as calculated by density functional theory. Additionally, the adsorption performance of the Cu-MOG still maintained removal efficiency of 100% after three regeneration cycles. These results suggested that the Cu-MOG could be expected to be a promising and competitive candidate to conveniently process wastewater.     

Contribution of the Kodama and 4S pathways to the dibenzothiophene biodegradation in different coastal wetlands under different C/N ratios

Dibenzothiophene (DBT) degradation mechanisms and the transformation of pathways during the incubation of three types of coastal sediments with C/N ratios ranging from 1 to 9 were investigated. The DBT degradation efficiencies were clearly improved with increasing C/N ratio in reed wetland sediments, tidal wetlands sediments and estuary wetland sediments. The quantitative response relationships between DBT degradation rates and related functional genes demonstrate that the Kodama pathway-related gene groups were dominant factors at low C/N ratios, while the 4S-related gene groups mainly determined the degradation rate when the C/N ratio was up to 5. Network analysis also shows that the pathway shifts from the Kodama pathway to the 4S pathway occurred through changes in the connections between functional genomes and rates. Furthermore, there were competition and collaboration between the Kodama and 4S pathways. The 4S pathway-related bacteria were more active in estuary wetland sediments compared with reed wetland sediments and tidal wetland sediments. The higher degradation efficiency in estuary wetland sediments may indicate the greater participation of the 4S pathway in the DBT biodegradation reaction. And the effects of ring cleavage of Kodama pathway caused more complete metabolizing of DBT.     

Female sex pheromone of Ostrinia orientalis – throwing a light on the relationship between O. orientalis and the European corn borer, O. nubilalis

Summary. The sex pheromone of Ostrinia orientalis (Lepidoptera: Crambidae) was analyzed by gas chromatography–electroantennographic detection (GC–EAD), GC–mass spectrometry and a series of bioassays. Three EAD-active compounds were detected in the female sex pheromone gland extract, and identified as tetradecyl acetate (14:OAc), (Z)-11-tetradecenyl acetate (Z11-14:OAc) and (E)-11-tetradecenyl acetate (E11-14:OAc). The titers (ratio) of 14:OAc, Z11-14:OAc and E11-14:OAc in 3-day-old virgin females were 0.49 ng (10), 4.86 ng (98) and 0.10 ng (2), respectively. In a wind-tunnel bioassay, the 98:2 blend of Z11- and E11-14:OAc, but not Z11-14:OAc alone, elicited the same male behavioral responses as virgin females and crude gland extracts. 14:OAc was inactive by itself, and did not show any synergistic effect on the binary blend. Field trapping experiments also confirmed the attractiveness of the binary blend to O. orientalis males. Based on these results, we concluded that the sex pheromone of O. orientalis is a 98:2 mixture of Z11-14:OAc and E11-14:OAc. This sex pheromone is very similar to that of the Z-type European corn borer, O. nubilalis. The present finding raises the question of whether O. orientalis , which is indistinguishable from O. nubilalis based on external morphology, is a biologically distinct species independent from O. nubilalis.