Estimation of external gamma radiation dose in the area of Bory Stobrawskie forests (PL)

The study assessed the radiological risks associated with the presence of natural and artificial radionuclides in the Bory Stobrawskie forests (PL). Using the conversion factors given by UNSCEAR and the measurements results of (232)Th series, (238)U series, (40)K, and (137)Cs specific activities in the 10-cm soil layer the values of absorbed dose (D) and the annual effective dose equivalent derived from terrestrial gamma radiation (E) were calculated. The calculated dose was compared with doses directly measured on the area studied.     

PM2.5 in the central part of Upper Silesia, Poland: concentrations, elemental composition, and mobility of components

The paper discusses ambient concentrations of PM_2.5 (ambient fine particles) and of 29 PM_2.5-related elements in Zabrze and Katowice, Poland, in 2007. The elemental composition of PM_2.5 was determined using energy dispersive X-ray fluorescence (EDXRF). The mobility (cumulative percentage of the water-soluble and exchangeable fractions of an element in its total concentration) of 18 PM_2.5-related elements in Zabrze and Katowice was computed by using sequential extraction and EDXRF combined into a simple method. The samples were extracted twice: in deionized water and in ammonium acetate. In general, the mobility and the concentrations of the majority of the elements were the same in both cities. S, Cl, K, Ca, Zn, Br, Ba, and Pb in both cities, Ti and Se in Katowice, and Sr in Zabrze had the mobility greater than 70%. Mobility of typical crustal elements, Al, Si, and Ti, because of high proportion of their exchangeable fractions in PM, was from 40 to 66%. Mobility of Fe and Cu was lower than 30%. Probable sources of PM_2.5 were determined by applying principal component analysis and multiple regression analysis and computing enrichment factors. Great part of PM_2.5 (78% in Katowice and 36% in Zabrze) originated from combustion of fuels in domestic furnaces (fossil fuels, biomass and wastes, etc.) and liquid fuels in car engines. Other identified sources were: power plants, soil, and roads in Zabrze and in Katowice an industrial source, probably a non-ferrous smelter or/and a steelwork, and power plants.     

Can Repeated Fertilizer Applications to Young Norway Spruce Enhance Avian Diversity in Intensively Managed Forests?

Repeated fertilization of forests to increase biomass production is an environmentally controversial proposal, the effects of which we assessed on breeding birds in stands of young Norway spruce (Picea abies), in an intensively managed forest area in southern Sweden. Our results show that fertilized stands had 38% more species and 21% more individuals than unfertilized stands. Compared with stands under traditional management, the further intensification of forestry by repeated applications of fertilizers thus seemed to enhance species richness and abundance of forest birds. We cannot conclude at this stage whether the response in the bird community was caused by changes in food resources or increased structural complexity in the forest canopy due to the skid roads used for the application of the fertilizers. Future studies should focus on structural and compositional effects of fertilization processes during the entire rotation period and at assessing its effects in a landscape context.     

Removal of petroleum pollutants and monitoring of bacterial community structure in a membrane bioreactor

The long-term operational stability (159 d) in removal of organics and ammonia from synthetic wastewater was investigated. The experiment was carried out in two identical plug flow membrane bioreactors (MBR) (each with a submerged A4 Kubota membrane) operated under aerobic conditions. The vacuum distillate of a crude oil fraction in the emulsified state, which was used to model the petroleum pollutants, was added into the feed medium. The performance of biological treatment was evaluated by physicochemical analyses such as nitrogen forms, COD, and BOD. Additionally, monitoring of PAHs in the wastewaters was performed using HPLC-diode array detector. Moreover, the community structure of bacteria was analyzed by polymerase chain reaction-denaturing gradient gel electrophoresis. The MBR treatment was very effective with reduction by more than 90% of COD and Total Organic Carbon. Nearly complete removal of petroleum originated non-polar micropollutants was observed. The influence of the highest dosage of petroleum pollutants (1000 μLL(-1)) on the bacterial community was noted.     

The population dynamics of nitrifiers in ammonium-rich systems

Non-optimal pH, dissolved oxygen concentration, the presence of toxic substances, or the influence of grazers are known to cause disturbances in nitrification. Because activated sludge is a mixture of different organisms, bacteria, and higher organisms, the stability of processes such as carbon removal, nitrification, denitrification, and dephosphatation depends on a range of interactions. These interactions occur both between and within trophic levels. Understanding of the ecology of microorganisms involved in bioprocesses is essential for effective control of startup and operation of a particular process. The aim of the study was to gain further insight into the dynamics of nitrifiers in activated sludge at various sludge ages while treating higher concentrations of ammonium. The results confirmed the importance of Nitrosococcus mobilis and Nitrobacter sp. as the dominant nitrifiers responsible for nitritation and nitratation, respectively, in the presence of unlimited ammonium. The size of the dominant bacteria colony was larger compared to the other species present and reached 25 microm. Problems with nitrification occurred in all high-ammonium loaded reactors. The dynamics of nitrifier population was monitored by oxygen uptake rate (OUR) using a test enabling the OUR measurement separately for ammonium-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB). The results reveal the hypersensitivity of nitrifiers to the substrate and products of incomplete nitrification.     

Levoglucosan and other cellulose and lignin markers in emissions from burning of Miocene lignites

Levoglucosan (L), mannosan (M), galactosan (G) and other cellulose and lignin markers from burn tests of Miocene lignites of Poland were determined by gas chromatography–mass spectrometry (GC–MS) to assess their distributions and concentrations in the smoke. Their distributions were compared to those in the pyrolysis products of the lignites. Levoglucosan and other anhydrosaccharides are products from the thermal degradation of cellulose and hemicellulose and are commonly used as tracers for wood smoke in the atmosphere. Here we report emission factors of levoglucosan in smoke particulate matter from burning of lignite varying from 713 to 2154 mg kg^?1, which are similar to those from burning of extant plant biomass. Solvent extracts of the lignites revealed trace concentrations of native levoglucosan (0.52–3.7 mg kg^?1), while pyrolysis yielded much higher levels (1.6–3.5 × 10⁴ mg kg^?1), indicating that essentially all levoglucosan in particulate matter of lignite smoke is derived from cellulose degradation. The results demonstrate that burning of lignites is an additional input of levoglucosan to the atmosphere in regions where brown coal is utilized as a domestic fuel. Interestingly, galactosan, another tracer from biomass burning, is not emitted in lignite smoke and mannosan is emitted at relatively low concentrations, ranging from 7.8 to 70.5 mg kg^?1. Thus, we propose L/M and L/(M + G) ratios as discriminators between products from combustion of lignites and extant biomass. In addition, other compounds, such as shonanin, belonging to lignans, and some saccharides, e.g., α- and β-glucose and cellobiose, are reported for the first time in extracts of bulk lignites and of smoke particulate matter from burning these lignites.     

Change of PCBs and forms of heavy metals in sewage sludge during thermophilic anaerobic digestion

Determination of seven congeners of PCBs was carried out for sewage sludge before, during and after thermophilic digestion. The overall content of heavy metals (Zn, Cu, Ni, Cd, Pb, Cr) in sludge before and after digestion was determined. Moreover the concentration of heavy metals in particular chemical fractions of the sludge was analyzed. After the thermophilic digestion total concentration of seven PCBs was reduced by 47%, which suggests that thermophilic digestion affects PCB reduction positively. On the 10th d of the process, concentration of lower chlorinated PCBs increased, whereas those of higher chlorinated PCBs decreased. The thermophilic digestion process showed no accumulation of the studied heavy metals in the mobile fractions (exchangeable and carbonate) of the stabilized sewage sludge, except for nickel. The highest increase in zinc, copper, cadmium, and chromium concentration was observed in the organic-sulfide fraction, whereas the highest increase in lead was found in the residual fraction of the sludge. In case of nickel both fractions of organic-sulfide and exchangeable-carbonate fractions were enriched.