Levels of polychlorinated biphenyls and organochlorine pesticides in serum samples of Egyptian Vulture (Neophron percnopterus) from Spain

Concentrations of 23 polychlorinated biphenyls (PCBs), p,p'-DDT and two of its metabolites, p,p'-DDE and p,p'-TDE have been measured in serum samples of up to 1 ml of Egyptian Vulture (Neophron percnopterus) gathered from five populations in Spain. SigmaPCB concentrations were found to be in the range 3.2-97 ng/ml, while those of SigmaDDTs ranged from 0.93 to 38 ng/ml. p,p'-DDT/p,p'-DDE ratios higher than one were only found in the Segovia population, which could be an indication of recent use of p,p'-DDT in the area. In all cases, PCB profiles were dominated by congeners 52, 132 + 105, 138, 153 and 180. However, some differences among the five populations studied became evident when their profiles were compared with those of technical PCB mixtures by principal components analysis. The DDT and PCB levels detected in the serums analysed were lower than those previously reported for similar avian species and those reported to have deleterious effects on survival or reproduction of birds.     

Roadside particle number distributions and relationships between number concentrations, meteorology, and traffic along a northern California freeway

Particle number distributions were measured simultaneously upwind and downwind of a suburban-agricultural freeway to determine relationships with traffic and meteorological parameters. Average traffic volumes were 6330 vehicles/hr with 10% heavy-duty vehicles, and volumes were higher in July than November. Most downwind particle number distributions were bimodal, with a primary mode at approximately 10-25 nm, indicating that newly formed particles were sampled. Total downwind 6-237 nm particle number concentrations (Ntot) ranged from 9.3 x 10(3) to 2.5 x 10(5) cm(-3), with higher daily average concentrations in November compared with July. Ntot correlated with wind speed, temperature, and relative humidity. Upwind photochemically initiated nucleation likely led to elevated background nanoparticle concentrations in July, as evidenced by increasing upwind distribution modal diameter with increasing temperature and a strong correlation between upwind Ntot and solar radiation. Also in summer, Ntot showed stronger correlation with heavy-duty vehicle volumes than wind speed, temperature, and relative humidity. These results indicate the importance of measuring background particle size distributions simultaneously with roadside distributions. There may be a minimum vehicle volume from which useful real-world vehicle particle number distributions can be measured at roadside, even when collecting samples within 10 m of the traveled lanes.     

Prediction of ozone concentration in ambient air using multivariate methods

Multivariate statistical methods including pattern recognition (Principal Component Analysis--PCA) and modeling (Multiple Linear Regression--MLR, Partial Least Squares--PLS, as well as Principal Component Regression--PCR) methods were carried out to evaluate the state of ambient air in Miskolc (second largest city in Hungary). Samples were taken from near the ground at a place with an extremely heavy traffic. Although PCA is not able to determine the significance of variables, it can uncover their similarities and classify the cases. PCA revealed that it is worth to separate day and night data because different factors influence the ozone concentrations during all day. Ozone concentration was modeled by MLR and PCR with the same efficiency if the conditions of meteorological parameters were not changed (i.e. morning and afternoon). Without night data, PCR and PLS suggest that the main process is not a photochemical but a chemical one.     

A combination of ion exchange and electrochemical reduction for nitrate removal from drinking water. Part I: nitrate removal using a selective anion exchanger in the bicarbonate form with reuse of the regenerant solution.

The process of selective nitrate removal from drinking water by means of ion exchange was studied. A commercial strong base anion exchanger with triethylammonium (-N+Et3) functional groups was used in the bicarbonate (HCO3-) and carbonate (CO3(2-)) form. The aim of this study was to optimize ion-exchanger regeneration in view of the subsequent electrochemical reduction of nitrates in the spent regenerant solution. The effects of ion-exchanger form, concentration of regenerant solution, and presence of nitrates, chlorides, and sulphates in the regenerant solution were studied. The strong base anion exchanger in HCO3- form that was investigated was able to treat 270 bed volumes of model water solution containing 124 mg dm(-3) nitrates. To achieve adequate regeneration of the saturated anion exchanger, it is necessary to use approximately 30 bed volumes of fresh 1-M sodium bicarbonate (NaHCO3) regenerant solution. The presence of residual 50-mg dm(-3) nitrates in the regenerant solution, treated by electrolysis, resulted in an increase in the dose of regenerant solution to 35 bed volumes and a decrease in the subsequent sorption run of approximately 13%. The volume of applied regenerant solution was high, but the consumption of NaHCO3 for regeneration was low.     

Biodegradation of chlorinated solvents in a water unsaturated topsoil

In order to investigate topsoils as potential sinks for chlorinated solvents from the atmosphere, the degradation of trichloromethane (CHCl(3)), 1,1,1-trichloroethane (CH(3)CCl(3)), tetrachloromethane (CCl(4)), trichloroethene (C(2)HCl(3)) and tetrachloroethene (C(2)Cl(4)) was studied in anoxic laboratory experiments designed to simulate denitrifying conditions in water unsaturated topsoil. Active denitrification was demonstrated by measuring the release of 15N in N(2) to the headspace from added 15N labeled nitrate. The degradation of chlorinated aliphatic compounds was followed by measuring their concentrations in the headspace above the soil.The headspace concentrations of all the chlorinated solvents except CH(3)CCl(3) were significantly (P相似文献   

Assessment of tin and butyltin species in estuarine superficial sediments from Gipuzkoa,Spain

Ten superficial sediments from river estuaries of Gipuzkoa (North Spain) were collected and analyzed for nine metals (including tin, Sn) and butyltin compounds (monobutyltin, MBT; dibutyltin, DBT; tributyltin, TBT). Total metal concentration in the fine fraction (<63 micrometer) of the sediment was determined in aqua regia--hydrofluoric acid extracts by atomic absorption spectrometry. The butyltin species (BTs) were firstly extracted from the sediments with hydrochloric acid-methanol mixture. After derivatization with sodium tetraethyl borate, the organotin compounds were extracted by solid phase microextraction (SPME) in headspace mode. A fiber coated with 100 micrometer poly(dimethylsiloxane) was used for SPME. The organotin species were analyzed by gas chromatography-flame ionization detection. Analysis of the certified reference sediment (PACS-2) shown the suitability of the procedures for determination of metal contents and DBT-TBT species in contaminated sediments. Factorial analysis was used to examine the main sources of metals. Three factors represented more than 89% of the total variance of the metal system, and the Sn was related with Cu-Zn-Pb suggesting the same pollution source. The BTs concentrations in the area were high (TBT ranged from 0.05 to 5.48 mg Sn kg(-1)). The percentage of total butyltin species ( summation operator BTs) respect to the total Sn amount was higher than 4% in all the sediments, showing in the Bidasoa river estuary a remarkable value higher than 20%. Hence, the studied estuarine sediments reflect a pollution that is related with historical industrial and fishing activities of the area.     

Dehalogenation Potential of Municipal Waste Incineration Fly Ash

BACKGROUND, AIMS AND SCOPE: In the first part of this paper the main principles which control the dehalogenation of polychlorinated aromatic compounds on municipal waste incineration fly ash (MWI-FA) have been discussed and the model fly ash of similar dehalogenation activity has been proposed. Even if both systems show comparable dehalogenation properties, the main question concerning the postulated identical reaction mechanism in both cases is left unanswered. The other very important point is to what extent is this dechlorination mechanism thermodynamically controlled. The same problem is often discussed in the literature also for the de novo synthetic reactions. From the data it is clear that metallic copper plays a decisive role in the mechanism of the dehalogenation reaction. Although the results reported in the first part strongly support the idea that copper acts in this dechlorination as the reaction component, in contrast to its generally accepted catalytic behaviour, we believed that additional support for this conclusion can be obtained with the help of a thermodynamic interpretation of the mechanism of the reaction. RESULTS AND DISCUSSION: The pathways of hexachlorobenzene dechlorination on MWI-FA and model fly ash were studied in a closed system at 260-300 degrees C under nitrogen atmosphere. These pathways were the same for both systems, with the following prevailing sequences: hexachlorobenzene --> pentachlorobenzene --> 1,2,3,5-tetrachlorobenzene --> 1,3,5-trichlorobenzene --> 1,3-dichlorobenzene. Thermodynamic calculations were carried out by using the method of minimization total Gibbs energy of the whole system. In the calculations, the following reaction components were taken into account: all gaseous chlorinated benzenes, benzene, hydrogen chloride, a gaseous trimer Cu3Cl3, and also Cu2O and CuCl2 as solid components. The effect of the reaction temperature and the amount of copper and water vapour were considered as well. The effect of reaction temperature was determined from the data calculated for the 500 to 750 K temperature region. The effect of the initial composition was determined for the molar amounts of copper = 0.01-3 moles and water vapour = 0.2 to 3 moles per mole of chlorobenzene isomer CONCLUSIONS: The results of hexachlorobenzene dechlorination by MWI-FA and model fly ash under comparable reaction conditions allow us to conclude that both dechlorinations proceed via the same dechlorination pathways, which can be taken as an evidence of the identical dehalogenation mechanism for both systems. The relative percentual distribution of the dehalogenated products depends on the temperature, but not on the initial amount of water vapour or copper metal. On the other hand, the initial amount of copper substantially affects the conversion of the dehalogenation as well as the molar ratio of Cu3Cl3 to HCl in the equilibrium mixture. Comparison of the experimental with thermodynamic results supports the idea that dehalogenation reactions are thermodynamically controlled. RECOMMENDATIONS AND OUTLOOK: Thermodynamic analysis of the dehalogenation reactions may prove useful for a wide range of pollutants. The calculations concerning polychlorinated biphenyls and phenols are under study.     

A microcosm approach to assessing the effects of earthworm inoculation and oat cover cropping on CO2 fluxes and biological properties in an amended semiarid soil

We designed a microcosm experiment to assess the influence of inoculation with Eisenia foetida earthworms and the establishment of an Avena sativa cover crop on biological (enzyme activities and labile carbon fractions) soil quality indicators in a soil treated with a composted organic residue, and to determine the contribution of these treatments to carbon dioxide emissions from the soil to the atmosphere of the microcosm. The microcosms were incubated for 53 days under 28 °C/18 °C day/night temperatures. The addition of earthworms and the planting of A. sativa increased dehydrogenase activity of compost amended soil by about 44% after 23 days of incubation. The metabolic potential, calculated as the ratio dehydrogenase activity/water soluble C, was higher in the compost amended soil planted with A. sativa. The highest total amount of CO₂–C evolved occurred in the soil treated with composted residue and earthworms (about 40% of the total amount of CO₂ evolved came from earthworm activity). The planting of A. sativa increased the decomposition rate constant of organic matter in the amended soil but decreased the potentially mineralizable C pool. In conclusion, the establishment of an A. sativa cover crop and the addition of E. foetida to a degraded agricultural soil treated with composted residue were effective treatments for improving the biological and biochemical quality and the metabolic potential of the soil.     

Results and evaluation of the first study of organochlorine contaminants (PCDDs, PCDFs, PCBs and DDTs), heavy metals and metalloids in birds from Baja California, México

Organochlorine compounds (OCs) including polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs) and 1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene (p-p'-DDE), heavy metals (Pb, Cd, Zn, Cu), and arsenic were measured in house sparrows (Passer domesticus) and common ground doves (Columbina passerina) from Baja California Sur, México. Concentrations of PCDD/Fs were low, with 21 pg/g for house sparrows, and 7.7 pg/g for common ground doves. Non-ortho-PCB concentrations in house sparrow and common ground doves were 58 and 254 pg/g, respectively, and are within the highest concentrations reported in species that are in the low levels of food webs. The major differences in organochlorine levels between species were found for ortho-PCBs and DDTs. ortho-PCB levels were higher in the seedeater species, whereas DDT levels were higher in the omnivorous species. Heavy metal levels were far below those associated with negative effects.     

Modelling the transport of suspended particulate matter by the Rhone River plume (France). Implications for pollutant dispersion

A model to simulate the transport of suspended particulate matter by the Rhone River plume has been developed. The model solves the 3D hydrodynamic equations, including baroclinic terms and a 1-equation turbulence model, and the suspended matter equations including advection/diffusion of particles, settling and deposition. Four particle classes are considered simultaneously according to observations in the Rhone. Computed currents, salinity and particle distributions are, in general, in good agreement with observations or previous calculations. The model also provides sedimentation rates and the distribution of different particle classes over the sea bed. It has been found that high sedimentation rates close to the river mouth are due to coarse particles that sink rapidly. Computed sedimentation rates are also similar to those derived from observations. The model has been applied to simulate the transport of radionuclides by the plume, since suspended matter is the main vector for them. The radionuclide transport model, previously described and validated, includes exchanges of radionuclides between water, suspended matter and bottom sediment described in terms of kinetic rates. A new feature is the explicit inclusion of the dependence of kinetic rates upon salinity. The model has been applied to 137Cs and 239,240Pu. Results are, in general, in good agreement with observations.