Acceleration of the Fe(III)EDTA(-) reduction rate in BioDeNO(x) reactors by dosing electron mediating compounds

BioDeNO(x), a novel technique to remove NO(x) from industrial flue gases, is based on absorption of gaseous nitric oxide into an aqueous Fe(II)EDTA(2-) solution, followed by the biological reduction of Fe(II)EDTA(2-) complexed NO to N(2). Besides NO reduction, high rate biological Fe(III)EDTA(-) reduction is a crucial factor for a succesful application of the BioDeNO(x) technology, as it determines the Fe(II)EDTA(2-) concentration in the scrubber liquor and thus the efficiency of NO removal from the gas phase. This paper investigates the mechanism and kinetics of biological Fe(III)EDTA(-) reduction by unadapted anaerobic methanogenic sludge and BioDeNO(x) reactor mixed liquor. The influence of different electron donors, electron mediating compounds and CaSO(3) on the Fe(III)EDTA(-) reduction rate was determined in batch experiments (21mM Fe(III)EDTA(-), 55 degrees C, pH 7.2+/-0.2). The Fe(III)EDTA(-) reduction rate depended on the type of electron donor, the highest rate (13.9mMh(-1)) was observed with glucose, followed by ethanol, acetate and hydrogen. Fe(III)EDTA(-) reduction occurred at a relatively slow (4.1mMh(-1)) rate with methanol as the electron donor. Small amounts (0.5mM) of sulfide, cysteine or elemental sulfur accelerated the Fe(III)EDTA(-) reduction. The amount of iron reduced significantly exceeded the amount that can be formed by the chemical reaction of sulfide with Fe(III)EDTA(-), suggesting that the Fe(III)EDTA(-) reduction was accelerated via an auto-catalytic process with an unidentified electron mediating compound, presumably polysulfides, formed out of the sulfur additives. Using ethanol as electron donor, the specific Fe(III)EDTA(-) reduction rate was linearly related to the amount of sulfide supplied. CaSO(3) (0.5-100mM) inhibited Fe(III)EDTA(-) reduction, probably because SO(3)(2-) scavenged the electron mediating compound.     

The contemporary cement cycle of the United States

A country-level stock and flow model for cement, an important construction material, was developed based on a material flow analysis framework. Using this model, the contemporary cement cycle of the United States was constructed by analyzing production, import, and export data for different stages of the cement cycle. The United States currently supplies approximately 80% of its cement consumption through domestic production and the rest is imported. The average annual net addition of in-use new cement stock over the period 2000–2004 was approximately 83 million metric tons and amounts to 2.3 tons per capita of concrete. Nonfuel carbon dioxide emissions (42 million metric tons per year) from the calcination phase of cement manufacture account for 62% of the total 68 million tons per year of cement production residues. The end-of-life cement discards are estimated to be 33 million metric tons per year, of which between 30% and 80% is recycled. A significant portion of the infrastructure in the United States is reaching the end of its useful life and will need to be replaced or rehabilitated; this could require far more cement than might be expected from economic forecasts of demand for cement.     

Exploring the risk information gap. Research into information supply and information demand of different parties concerned

The Dutch National Institute for Public Health and the Environment (RIVM), a governmental research institute, provides information on environmental and health risks. The primary contractors’ information demands are served well. But the risk information available from the RIVM does not always correspond to the desires and requirements of other parties concerned. It became apparent that – to a certain extent – an information gap exists, arising from a difference between the institute’s information supply and the information demand of the different parties concerned.This explorative study focuses on the information demand and supply with regard to three different risks: flooding by rivers, air pollution and food related risks.For each risk, the information supply was determined by listing the available risk information in RIVM reports. In a second step, the information demand of the five different parties, as well as different channels of communication, were examined. The parties’ perceptions and requirements concerning risk information were identified in interviews and focus group discussions.The public, which in general appeared to be quite unfamiliar with the institute and its information sources, preferred risk information tailored to its personal circumstances. Policy makers mainly appreciated personal contacts in order to keep up to date on risk topics, whereas NGOs and fellow researchers judged the institute’s website and reports to be more relevant. Press releases appeared to add little to satisfying the information demand of the media.     

Greening flood protection through knowledge processes: lessons from the Markermeer dikes project in the Netherlands

Greening flood protection (GFP) is increasingly recognized as an adaptive and flexible approach to water management that is well suited to addressing uncertain futures associated with climate change. In the last decade, GFP knowledge and policies have developed rapidly, but implementation has been less successful and has run into numerous barriers. In this paper, we address the challenge of realizing green flood protection goals by specifically considering knowledge in the decision-making of a Dutch flood protection project in Lake Markermeer. In this project, an ecological knowledge arrangement and a traditional flood protection knowledge arrangement are compared and their interactions analysed. The analysis provides insight into the specific difficulties of implementing GFP measures and identifies ways to realize GFP goals. The primary challenge is twofold: First, a self-reinforcing cycle of knowledge production and decision-making in the flood protection domain inhibits the introduction of innovative and multifunctional approaches such as GFP; second, the distribution of power is severely unbalanced in terms of ecological enhancement and flood protection, favouring the latter. Implementation of GFP requires structural change and the integration of ecological and flood protection knowledge and policy. Potentially rewarding routes towards this integration are the exploration of shared interests in GFP and the creation of mutual dependency between knowledge arrangements. The case study and the insights it provides show that GFP is far from mainstream practice and that implementation requires serious effort and courage to break with historical practices.     

Is it only the regulatory status? Broadening the debate on cisgenic plants

In current debates on emerging technologies for plant breeding in Europe, much attention has been given to the regulatory status of these techniques and their public acceptance. At present, both genetically modified plants with cisgenic approaches—using genes from crossable species—as well as transgenic approaches—using genes from different species—fall under GMO regulation in the EU and both are mandatorily labelled as GMOs. Researchers involved in the early development of cisgenic GM plants convey the message that the potential use and acceptance of cisgenic approaches will be seriously hindered if GMO regulations are not adjusted. Although the similar treatment and labelling of transgenic and cisgenic plants may be a legitimate concern for the marketability of a cisgenic GM plant, there are concerns around their commercialization that reach beyond the current focus on (de)regulation. In this paper, we will use the development of the cisgenic GM potato that aims to overcome ‘late blight’—the most devastating potato disease worldwide—as a case to argue that it is important to recognize, reflect and respond to broader concerns than the dominant focus on the regulatory ‘burden’ and consumer acceptance. Based on insights we gained from discussing this case with diverse stakeholders within the agricultural sector and potato production in Norway during a series of workshops, we elaborate on additional issues such as the (technical) solution offered; different understandings of the late blight problem; the durability of the potato plant resistance; and patenting and ownership. Hence, this paper contributes to empirical knowledge on stakeholder perspectives on emerging plant breeding technologies, underscoring the importance to broaden the scope of the debate on the opportunities and challenges of agricultural biotechnologies, such as cisgenic GM plants. The paper offers policy-relevant input to ongoing efforts to broaden the scope of risk assessments of agricultural biotechnologies. We aim to contribute to the recognition of the complex socio-ecological, legal and political dimensions in which these technological developments are entangled as a means to acknowledge, discuss and respond to these concerns and thereby contribute to more comprehensive and responsible developments within agricultural biotechnology.     

Green Toxicology: a strategy for sustainable chemical and material development

Green Toxicology refers to the application of predictive toxicology in the sustainable development and production of new less harmful materials and chemicals, subsequently reducing waste and exposure. Built upon the foundation of “Green Chemistry” and “Green Engineering”, “Green Toxicology” aims to shape future manufacturing processes and safe synthesis of chemicals in terms of environmental and human health impacts. Being an integral part of Green Chemistry, the principles of Green Toxicology amplify the role of health-related aspects for the benefit of consumers and the environment, in addition to being economical for manufacturing companies. Due to the costly development and preparation of new materials and chemicals for market entry, it is no longer practical to ignore the safety and environmental status of new products during product development stages. However, this is only possible if toxicologists and chemists work together early on in the development of materials and chemicals to utilize safe design strategies and innovative in vitro and in silico tools. This paper discusses some of the most relevant aspects, advances and limitations of the emergence of Green Toxicology from the perspective of different industry and research groups. The integration of new testing methods and strategies in product development, testing and regulation stages are presented with examples of the application of in silico, omics and in vitro methods. Other tools for Green Toxicology, including the reduction of animal testing, alternative test methods, and read-across approaches are also discussed.     

Influence of age,season, body condition and geographical area on concentrations of chlorinated and brominated contaminants in wild mink (Neovison vison) in Sweden

The wild mink has gained acceptance as a sentinel species in environmental monitoring. However, only limited data are available in the literature on factors driving variability in concentrations of organic pollutants in this species. This study characterizes the differences in contaminant concentrations in subcutaneous fat of male mink from four different areas in Sweden and demonstrates how age, season and body condition influence concentrations of polychlorinated biphenyl (PCB) congeners, polybrominated diphenyl ether (PBDE) congeners (including methoxylated forms, MeO-PBDEs), as well as the pesticides dichlorodiphenyldichloroethylene (DDE), chlordane and hexachlorobenzene (HCB). The data were statistically treated using multiple regression and principal component analysis. The ∑PCB concentration and concentrations of PCB congeners 138, 156, 157, 180, 170/190, 189, 194, 206, 209 as well as PBDE 153/154 varied with age. Season had an influence on ∑PCB, PBDE 47 and PBDE 153/154 concentrations, as well as concentrations of most PCB congeners, with the exception of PCB 101, 110, 141 and 182/187. Lean mink had higher concentrations of most PCBs and PBDEs than mink with larger fat depots. The analyzed pesticides (DDE, oxychlordane, HCB) showed no systematic variation with season, age or body condition. The concentrations of MeO-PBDEs were generally low and 6MeO-PBDE 47 was the most commonly detected MeO-PBDE in mink from marine, brackish and freshwater areas. The results indicate that age, season and body condition are factors that may influence the concentrations of PCBs and PBDEs, and it is thus recommended to take these factors into account when analyzing mink exposure data.     

Copper kinetics and internal distribution in the marbled crayfish (Procambarus sp.)

Metal pollution e.g. copper, in water bodies occurs worldwide. Although copper is an essential trace metal, at certain levels it is still considered as pollutant. The aim of this study was to investigate the effect of exposure concentration on copper bioaccumulation in marbled crayfish (Procambarus sp.) by determining uptake and elimination kinetics. Crayfish were exposed to sub-lethal copper concentrations (average measured concentrations of 0.031 and 0.38 mg Cu L⁻¹) for 14 d and transferred to copper-free water for another 14 d. At different time points during the uptake and elimination phases copper concentrations were measured in five organs (exoskeleton, gills, muscle, ovaries and hepatopancreas). At 0.031 mg Cu L⁻¹, copper levels in the crayfish organs were not significantly increased compared to the control animals, suggesting effective regulation. Exposure to 0.38 mg Cu L⁻¹ did lead to not significantly increased copper levels in muscles and ovaries, while the gills and exoskeleton, which are in direct contact with the water, showed significantly higher copper concentrations. In these four organs, copper showed fast uptake kinetics with equilibrium reached within 10 d of exposure. Copper accumulation was highest in the hepatopancreas; uptake in this storage organ steadily increased with time and did not reach equilibrium within the 14-d exposure period. Copper accumulation levels in the marbled crayfish found in this study were hepatopancreas > gills > exoskeleton > muscle.