Medical radioisotopes in the environment – following the pathway from patient to river sediment

Motivated by the detection of ¹³¹I in river sediment in routine long-term surveillance samples, a systematic short-term study of the wastewater treatment chain was planned and conducted. Inflow, effluent and primary sludge were collected on a daily basis during two weeks at a regional wastewater treatment plant. Samples were investigated by gamma spectroscopy. Four medically used isotopes could be identified (¹³¹I and ^99mTc regularly, ¹⁵³Sm and ¹²³I sporadically). The concentration levels coincide well with literature data for ¹³¹I, and with our own long-term data for ¹³¹I and ^99mTc for the same plant. Cosmogenic ⁷Be activity in primary sludge correlated well with rainfall intensity. Surface sediment was sampled at low tide at both shores of the river, up- and downstream of the plant. ¹³¹I was identified in all samples, with a sharp maximum (about 100 Bq kg⁻¹ d.m.) at the discharge point of the plant and lower levels elsewhere, decreasing monotonically in downstream direction. ⁷Be and ¹³⁷Cs showed the same behaviour, but no peak at the discharge point. Predictions from simple equilibrium models for the transport and sedimentation of ¹³¹I show good agreement with the experimental data and suggest that the wastewater treatment plant is the main source for this isotope.     

Post-combustion syntheses of PCDD/F and PBDD/F from halogen-rich fuel is suppressed by a pebble heater technology

GOAL, SCOPE AND BACKGROUND: Changes in German and European legislation shifted processing of polymer-rich shredding residues (SR) from landfill to thermal treatment. However, when waste of electric and electronic equipment (WEEE) is the source of SR, thermal treatment is complicated by halogens as well as the presence of polybrominated dioxins and furans (PBDD/F) and brominated flame retardants (BFR). Hence, WEEE requires high temperature incineration with sufficient residence times. Post-combustion synthesis of polyhalogenated dioxins and furans (PXDD/F) is dominant in the temperature range between 250-450 degrees C. Thus, a very rapid gas cooling from 450 degrees to 250 degrees C is important for proper raw gas treatment. The pebble heater technology developed by ATZ Entwicklungszentrum (Sulzbach-Rosenberg, Germany) might serve as an alternative to the state-of-the-art quench cooling. It is based on the application of a pebble bed of natural bulk material, which the exhaust gases flows through radially. It provides an excellent heat transfer and a temperature gradient in the range of 1,500-2,000 K/m. The paper presents data of a pilot application of the pebble heater technology for the treatment of raw gas derived from the incineration of polymeric materials from WEEE. METHODS: A liquid fuel was chosen in order to minimise technical modifications of the plant. It was analysed for halogens by x-ray fluorescence, for brominated flame retardants by HPLC-UV/MS and for PXDD/F by GC-HRMS. Combustion gases were rapidly cooled down to temperatures below 200 degrees C and emissions of PBDD/F and PCDD/ F were estimated without further off-gas treatment. PBDD/F emissions were computed as PCDD/F toxicity equivalents applying two different calculation approaches. RESULTS AND DISCUSSION: PCDD/F emissions accounted for 0.04 ng I-TEQ/Nm3 and are in compliance with European emission limits. Calculated PBDD/F toxicity equivalents exceeded the emission limit of 0.1 ng I-TEQ/Nm3 by factors of 75 and 208 depending on the calculation approach. A mass balance of PBDD/F and PCDD/F congeners revealed an efficient elimination of more than 95% in most cases. Lower reduction rates (76% for 2,3,7,8-TeBDF and 82% for 1,2,3,7,8-PeBDF) were attributed to incomplete combustion. An intended recovery of halogens by one-stage scrubbing downstream of the pebble heater was ineffective, recovering 28% of the applied chlorine and 9% of the bromine, only. CONCLUSIONS: Our pilot incineration test indicates that the pebble heater technology can effectively suppress a post-combustion synthesis of PCDD/F and PBDD/F, resulting in low PCDD/F emission levels without further off-gas treatment. The presented data state that WEEE is sensible to incomplete combustion, which will lead to increased PBDD/F emissions without increasing PCDD/F emission limits. This finding is especially relevant for small and low-technical incineration appliances, which have been reported to treat WEEE in developing countries and are considered to serve as a significant source of PXDD/F these days. RECOMMENDATIONS AND PERSPECTIVES: Monitoring of PCDD/F emissions only might considerably underestimate the total emission of dioxins and dioxin-like compounds. It is therefore an ineffective means for assessing resulting health risks, at least for those waste treatment plants which are considered to handle the increasing amounts of PBDD/ F-containing polymers from WEEE in future. Consequently, it is recommended to initiate a screening programme for PXDD/F emissions in large scale incineration facilities which are capable of treating WEEE shredder residues.     

Management priorities for Magdalena Bay, Baja California, Mexico

The current lack of a working resource management plan Magdalena Bay (southern Baja California, Mexico) has weakened attempts to set priorities among resource users and has contributed to: reduced fish stocks, land and marine contamination, and declines in the ecological integrity of the bay of 170 000 ha and its vast mangrove lagoon systems. The government agencies responsible for maintaining ecological integrity and managing marine resource use have not been successful in addressing these problems due to jurisdictional ambiguities, lack of community support, and lack of manpower for monitoring and enforcing policies. A framework was designed by the authors to work toward an approach for balancing between community development and conserving ecological integrity at the local level in the peripheral and central zones of the Magdalena Bay system. The goal of this framework was to suggest a basis for setting management priorities that included the perceptions and preferences of stakeholder groups with regard to direct threats to the environmental health of the study areas. To achieve this goal a crossdisciplinary study of the central and peripheral zones was used to examine factors that influence current resource use and the environmental state in these two regions of the bay system. Insights into the preferences and perceptions of stakeholder groups with regard to management priorities were acquired using the key informant technique. The results revealed potential conflicts with regard to preferred management priorities between stakeholder groups, as well as polarities within stakeholder groups themselves.     

Earth stewardship: Shaping a sustainable future through interacting policy and norm shifts

Transformation toward a sustainable future requires an earth stewardship approach to shift society from its current goal of increasing material wealth to a vision of sustaining built, natural, human, and social capital—equitably distributed across society, within and among nations. Widespread concern about earth’s current trajectory and support for actions that would foster more sustainable pathways suggests potential social tipping points in public demand for an earth stewardship vision. Here, we draw on empirical studies and theory to show that movement toward a stewardship vision can be facilitated by changes in either policy incentives or social norms. Our novel contribution is to point out that both norms and incentives must change and can do so interactively. This can be facilitated through leverage points and complementarities across policy areas, based on values, system design, and agency. Potential catalysts include novel democratic institutions and engagement of non-governmental actors, such as businesses, civic leaders, and social movements as agents for redistribution of power. Because no single intervention will transform the world, a key challenge is to align actions to be synergistic, persistent, and scalable.     

Review of Separation Technologies for Treating Pesticide-Contaminated Soil

ABSTRACT

Pesticide contamination results from manufacturing, improper storage, handling, or disposal of pesticides, and from agricultural processes. Since most pesticides are mixtures of different compounds, selecting a remedy for pesticide-contaminated soils can be a complicated process. The various available treatment options for remediation fall into three broad categories: containment-immobilization, separation-concentration, and destruction. This paper categorizes pesticides into waste groups based on available treatment options and provides a review of separation treatment options that have been demonstrated to—or show potential to— treat pesticide-contaminated soil. Technologies include radio frequency heating, soil washing, thermal desorp-tion, and solvent extraction.     

Nutrient kinetics modeled from time series of substrate depletion and growth: dissolved silicate uptake of Baltic Sea spring diatoms

We estimated silicate uptake kinetics for 8 spring diatom species using a model based on time series measurements of the depletion of dissolved silicate (DSi) and increases in biomass. Furthermore, the carbon: nitrogen: silicate stoichiometric relationships and maximum growth rates were determined. Differences in DSi uptake kinetics and maximum growth rate were distinct among the species. All the most common diatom species (Chaetoceros wighamii, Pauliella taeniata, Skeletonema costatum and Thalassiosira baltica) were relatively lightly silicified and had variable but relatively low half-saturation constants (K _s ), indicating that they are well adapted to low DSi concentrations. The less common Diatoma tenuis and Nitzschia frigida had higher K _s values, suggesting that they are more vulnerable to DSi limitation. The much used nitrogen:silicate ratio of 1 for marine diatom biomass was too low for most of the examined species, while a ratio of 2–3 seems to be more appropriate for these Baltic Sea species.     

Costing reproduction: effects of mating opportunity on mating success in male Bicyclus anynana butterflies

It is frequently assumed that males have an almost unlimited reproductive capacity, while access to receptive females is typically limiting. Consequently, sexual selection is expected to favor vigorous courtship behavior in males. If such behavior is associated with non-trivial costs, ample current mating opportunities should be accompanied by a reduction in future mating vigor. To test this hypothesis, three treatments differing in sex ratio were established using the tropical butterfly Bicyclus anynana: 50 males each were housed either with 0, 25, or 50 females. Mating trials involving the competition among males from each treatment for a single virgin female were carried out on days 3, 9, and 15 after allocation to treatments. While there was no difference on day 3, prior mating opportunity clearly reduced mating success on days 9 and 15, being lowest if identical numbers of males and females were housed together. This finding suggests accumulating costs associated with high courtship and/or mating activity. Further, older males were more active and initiated copulation earlier than the younger ones, consistent with the residual reproductive value hypothesis. We found no evidence for a survival or fertility cost of mating.     

Male mating history: effects on female sexual responsiveness and reproductive success in the parasitoid wasp Spalangia endius

Males frequently mate multiply, but are there negative fitness consequences for their later mates? Potential costs include less sperm and less nutrition. In most hymenopterans, daughters, but not sons, are produced sexually. This mean that effects of being a later mate on sperm received versus on nutrients received should be distinguishable. If later mates receive less sperm, it should manifest as a reduction in daughter production, whereas a reduction in nutrients should affect production of both sexes. Any cost to being a later mate may in turn select for polyandry or for female choice of virgin males. Males of the parasitoid wasp Spalangia endius were presented with up to five females in succession. Offspring production was compared among first, third, and fifth females; and it did not differ. However, about half of fifth females had begun producing only sons by their tenth day, whereas first and third females rarely had. Despite the reduction in daughter production, even fifth females rarely remated. However, females tended to mate with virgin males rather than mated males when given a choice. This tendency was dependent on male, not female, behavior, but should benefit the female nevertheless. Sex ratios in this species are one male for every one and a half to three females. Thus, the number of times that males could mate before daughter production was reduced coincided roughly with the mean number of times that males likely mate in this species. Nevertheless, some females are likely to experience the cost of being a fifth female because of skewed mating success among males.     

Participatory scenario planning to facilitate human–wildlife coexistence

Fostering human–wildlife coexistence requires transdisciplinary approaches that integrate multiple sectors, account for complexity and uncertainty, and ensure stakeholder participation. One such approach is participatory scenario planning, but to date, this approach has not been used in human–wildlife contexts. We devised a template for how participatory scenario planning can be applied to identify potential avenues for improving human–wildlife coexistence. We drew on 3 conceptual building blocks, namely the SEEDS framework, the notion of critical uncertainties, and the three-horizons technique. To illustrate the application of the proposed template, we conducted a case study in the Zambezi region of Namibia. We held 5 multistakeholder workshops that involved local people as well as numerous nongovernment and government stakeholders. We identified 14 important wildlife species that generated multiple services and disservices. The subsequent benefits and burdens, in turn, were inequitably distributed among stakeholders. Government actors played particularly influential roles in shaping social-ecological outcomes. We identified 2 critical uncertainties for the future: the nature of governance (fragmented vs. collaborative) and the type of wildlife economy (hunting vs. photography based). Considering these uncertainties resulted in 4 plausible scenarios describing future human–wildlife coexistence. Stakeholders did not agree on a single preferred scenario, but nevertheless agreed on several high-priority strategies. Bridging the remaining gaps among actors will require ongoing deliberation among stakeholders. Navigating the complex challenges posed by living with wildlife requires moving beyond disciplinary approaches. To that end, our template could prove useful in many landscapes around the world.     

Improved degradation of azo dyes by lignin peroxidase following mutagenesis at two sites near the catalytic pocket and the application of peroxidase-coated yeast cell walls

• Mutations in Lignin peroxidase Trp171 environment improved azo dyes degradation. • Expression on yeast cell surface and cell lysis allowed reusability of biocatalyst. • Aga2-LiP chimeric variants were characterized. The enzymatic degradation of azo dyes is a promising alternative to ineffective chemical and physical remediation methods. Lignin peroxidase (LiP) from Phanerochaete chrysosporium is a heme-containing lignin-degrading oxidoreductase that catalyzes the peroxide-dependent oxidation of diverse molecules, including industrial dyes. This enzyme is therefore ideal as a starting point for protein engineering. Accordingly, we subjected two positions (165 and 264) in the environment of the catalytic Trp171 residue to saturation mutagenesis, and the resulting library of 10⁴ independent clones was expressed on the surface of yeast cells. This yeast display library was used for the selection of variants with the ability to break down structurally-distinct azo dyes more efficiently. We identified mutants with up to 10-fold greater affinity than wild-type LiP for three diverse azo dyes (Evans blue, amido black 10B and Guinea green) and up to 13-fold higher catalytic activity. Additionally, cell wall fragments displaying mutant LiP enzymes were prepared by toluene-induced cell lysis, achieving significant increases in both enzyme activity and stability compared to a whole-cell biocatalyst. LiP-coated cell wall fragments retained their initial dye degradation activity after 10 reaction cycles each lasting 8 h. The best-performing mutants removed up to 2.5-fold more of each dye than the wild-type LiP in multiple reaction cycles.