Conserving connectivity: Human influence on subsidy transfer and relevant restoration efforts

Conservation efforts tend to focus on the direct impacts humans have on their surrounding environment; however there are also many ways in which people indirectly affect ecosystems. Recent research on ecological subsidies—the transfer of energy and nutrients from one ecosystem to another—has highlighted the importance of nutrient exchange for maintaining productivity and diversity at a landscape scale, while also pointing toward the fragility of ecotones and vulnerability of subsidies to human activities. We review the recent literature on landscape connectivity and ecosystem subsidies from aquatic systems to terrestrial systems. Based on this review, we propose a conceptual model of how human activities may alter or eliminate the flow of energy and nutrients between ecosystems by influencing the delivery of subsidies along the pathway of transfer. To demonstrate the utility of this conceptual model, we discuss it in the context of case studies of subsidies derived from salmon, marine mammals, sea turtles, sea birds, and shoreline debris. Subsidy restoration may require a different set of actions from simply reversing the pathway of degradation. We suggest that effective restoration and conservation efforts will require a multifaceted approach, targeting many steps along the subsidy transfer pathway, to address these issues.     

Perfluoroalkyl and polyfluoroalkyl substances thermal desorption evaluation

Per‐ and polyfluoroalkyl substances (PFAS) are highly resistant to biotic and abiotic degradation and can withstand very high temperatures before breaking down. The storage of PFAS‐impacted water and sediments in a holding pond or stockpiled investigation or remedial action‐derived waste is occurring on an increasing number of sites. The most common PFAS water treatment options include granular‐activated carbon and resins and the most common soil treatment options have been primarily limited to excavation, offsite incineration, and, in some cases, soil stabilization. An increasing number of states across the United States are establishing part per trillion PFAS guidance levels for drinking water. Removing PFAS from soils removes PFAS source impacts to groundwater. In this study, volatilization of PFAS from soil treated using in situ thermal heating is evaluated as a treatment method to achieve a high degree of PFAS removal from soils. The evaluation of temperatures needed to achieve removal is described. To minimize vapor treatment required for PFAS thermal remediation, a scrubber was incorporated into the treatment train to transfer PFAS to the liquid phase in a concentrated, low‐volume solution. Vapor‐liquid equilibrium behavior and the extent of PFAS volatilization from impacted soil over a range of temperatures were evaluated. Results showed that heating soil to 350°C and 400°C reduces PFAS soil concentrations by 99.91% and 99.998%, respectively. It was also confirmed that sulfonate‐based PFAS generally required higher temperatures for volatilization to occur than carboxylate‐based PFAS.     

Trends in biodiversity and habitat quantification tools used for market-based conservation in the United States

Market-based conservation mechanisms are designed to facilitate the mitigation of harm to and conservation of habitats and biodiversity. Their potential is partly hindered, however, by the quantification tools used to assess habitat quality and functionality. Of specific concern are the lack of transparency and standardization in tool development and gaps in tool availability. To address these issues, we collected information via internet and literature searchers and through conversations with tool developers and users on tools used in U.S. conservation mechanisms, such as payments for ecosystem services (PES) and ecolabel programs, conservation banking, and habitat exchanges. We summarized information about tools and explored trends among and within mechanisms based on criteria detailing geographic, ecological, and technical features of tools. We identified 69 tools that assessed at least 34 species and 39 habitat types. Where tools reported pricing, 98% were freely available. More tools were applied to states along the U.S. West Coast than elsewhere, and the level of tool transferability varied markedly among mechanisms. Tools most often incorporated conditions at numerous spatial scales, frequently addressed multiple risks to site viability, and required 1–83 data inputs. Most tools required a moderate or greater level of user skill. Average tool-complexity estimates were similar among all mechanisms except PES programs. Our results illustrate the diversity among tools in their ecological features, data needs, and geographic application, supporting concerns about a lack of standardization. However, consistency among tools in user skill requirements, incorporation of multiple spatial scales, and complexity highlight important commonalities that could serve as a starting point for establishing more standardized tool development and feature-incorporation processes. Greater standardization in tool design may expand market participation and facilitate a needed assessment of the effectiveness of market-based conservation.     

Spatial mapping of city-wide PBDE levels using an exponential decay model

Passive air samplers (PAS) consisting of polyurethane foam (PUF) disks were deployed at 6 outdoor air monitoring stations in different land use categories (commercial, industrial, residential and semi-rural) to assess the spatial distribution of polybrominated diphenyl ethers (PBDEs) in the Brisbane airshed. Air monitoring sites covered an area of ~1143 km(2) and PAS were allowed to accumulate PBDEs in the city's airshed over three consecutive seasons commencing in the winter of 2008. The average sum of five (∑(5)) PBDEs (BDEs 28, 47, 99, 100 and 209) levels were highest at the commercial and industrial sites (12.7 ± 5.2 ng PUF(-1)), which were relatively close to the city center and were a factor of 8 times higher than residential and semi-rural sites located in outer Brisbane. To estimate the magnitude of the urban 'plume' an empirical exponential decay model was used to fit PAS data vs. distance from the CBD, with the best correlation observed when the particulate bound BDE-209 was not included (∑(5)-209) (r(2) = 0.99), rather than ∑(5) (r(2) = 0.84). At 95% confidence intervals the model predicts that regardless of site characterization, ∑(5)-209 concentrations in a PAS sample taken between 4-10 km from the city centre would be half that from a sample taken from the city centre and reach a baseline or plateau (0.6 to 1.3 ng PUF(-1)), approximately 30 km from the CBD. The observed exponential decay in ∑(5)-209 levels over distance corresponded with Brisbane's decreasing population density (persons/km(2)) from the city center. The residual error associated with the model increased significantly when including BDE-209 levels, primarily due to the highest level (11.4 ± 1.8 ng PUF(-1)) being consistently detected at the industrial site, indicating a potential primary source at this site. Active air samples collected alongside the PAS at the industrial air monitoring site (B) indicated BDE-209 dominated congener composition and was entirely associated with the particulate phase. This study demonstrates that PAS are effective tools for monitoring citywide regional differences however, interpretation of spatial trends for POPs which are predominantly associated with the particulate phase such as BDE-209, may be restricted to identifying 'hotspots' rather than broad spatial trends.     

Combustion as the Principal Source of Carbonaceous Aerosol in the Ohio River Valley

Organic and elemental carbon and a number of carboxylic acids and n-alkanes were measured in aerosol samples collected at three sites in the Ohio River Valley between October 1980 and August 1981. Approximately 100 filters were analyzed for organic and elemental carbon for each site. For the 11-month period organic and elemental carbon comprised about 19 percent of the total aerosol mass with about two-thirds of the carbon as organic. Regression analysis showed that the principal source of organic carbon was combustion. The measurements of the specific organic compounds indicated a weak biogenic component to the organic aerosol.     

Metal and metalloid contamination in roadside soil and wild rats around a Pb-Zn mine in Kabwe, Zambia

Metal (Cr, Co, Cu, Zn, Cd, Pb, Ni) and metalloid (As) accumulation was studied in roadside soil and wild rat (Rattus sp.) samples from near a Pb-Zn mine (Kabwe, Zambia) and the capital city of Zambia (Lusaka). The concentrations of the seven metals and As in the soil samples and Pb in the rat tissue samples were quantified using atomic absorption spectroscopy. The concentrations of Pb, Zn, Cu, Cd, and As in Kabwe soil were much higher than benchmark values. Geographic Information System analysis indicated the source of metal pollution was mining and smelting activity. Interestingly, the area south of the mine was more highly contaminated even though the prevailing wind flow was westward. Wild rats from Kabwe had much higher tissue concentrations of Pb than those from Lusaka. Their body weight and renal Pb levels were negatively correlated, which suggests that mining activity might affect terrestrial animals in Kabwe.     

Toxic effects of oral 2-amino-4,6-dinitrotoluene in the Western fence lizard (Sceloporus occidentalis)

The compound 2-amino-4,6-dinitrotoluene (2A-DNT) was evaluated under laboratory conditions in the Western fence lizard (Sceloporus occidentalis) to assess the potential for reptile toxicity. Oral LD₅₀ values were 1406 and 1867 mg/kg for male and female lizards, respectively. Based on responses from a 14-day subacute study, a 60-day subchronic experiment followed where lizards were orally dosed at 0, 5, 15, 20, 25, 30 mg/kg-d. At day 60, number of days and survivors, food consumption, and change in body weight were inversely related to dose. Signs of toxicity were characterized by anorexia and generalized cachexia. Significant adverse histopathology was observed in hepatic tissue at ≥15 mg/kg-d, consistent with hepatocellular transdifferentiation. Based on survival, loss of body weight, diminished food intake, changes in liver, kidney, and testes, and increased blood urea nitrogen, these data suggest a LOAEL of 15 mg/kg-d and a NOAEL of 5 mg/kg-d in S. occidentalis.     

Multi-decadal changes in tundra environments and ecosystems: synthesis of the International Polar Year-Back to the Future project (IPY-BTF)

Understanding the responses of tundra systems to global change has global implications. Most tundra regions lack sustained environmental monitoring and one of the only ways to document multi-decadal change is to resample historic research sites. The International Polar Year (IPY) provided a unique opportunity for such research through the Back to the Future (BTF) project (IPY project #512). This article synthesizes the results from 13 papers within this Ambio Special Issue. Abiotic changes include glacial recession in the Altai Mountains, Russia; increased snow depth and hardness, permafrost warming, and increased growing season length in sub-arctic Sweden; drying of ponds in Greenland; increased nutrient availability in Alaskan tundra ponds, and warming at most locations studied. Biotic changes ranged from relatively minor plant community change at two sites in Greenland to moderate change in the Yukon, and to dramatic increases in shrub and tree density on Herschel Island, and in subarctic Sweden. The population of geese tripled at one site in northeast Greenland where biomass in non-grazed plots doubled. A model parameterized using results from a BTF study forecasts substantial declines in all snowbeds and increases in shrub tundra on Niwot Ridge, Colorado over the next century. In general, results support and provide improved capacities for validating experimental manipulation, remote sensing, and modeling studies.