An opinion on the distribution and behavior of chemicals in response to climate change,with particular reference to the Asia-Pacific region

There is a general lack of knowledge as regards the effects of climate change on pollutant behavior. This is particularly true of the Asia-Pacific Region (APR). This region has major significance in terms of global pollutant emission and also displays a wide variety of environments. This review presents the authors’ opinions on possible implications of climate change for pollutant behavior in the APR. Although differing responses can be expected across the region, there are clear implications as regards the short- and long-term behavior of pollutants. Effects can be predicted through modeling, but further data are required for model calibration. Nevertheless, it can be predicted that climate change will affect processes including global distillation of persistent organic pollutants, airborne transport of heavy metals, half-life of readily degradable pollutants, and eutrophication in water bodies. Particulates are expected to play a central role in mediating the effects of climate change, and successful predictive models will need to be based on particulate-mediated transport and behavior. Climate change also has the potential to cause an increase in the intensity and frequency of harmful algal blooms in aquatic environments throughout the region, with significant implications for supply of both food and drinking water.     

Observations of urban airborne particle number concentrations during rush-hour conditions: analysis of the number based size distributions and modal parameters

A summertime study of the number concentration and the size distribution of combustion derived nanometre sized particles (termed nanoparticles) from diesel and spark-ignition (SI) engine emissions were made under rush-hour and free-flow traffic conditions at an urban roadside location in Leeds, UK in July 2003. The measured total particle number concentrations (N(TOTAL)) were of the order 1.8 x 10(4) to 3.4 x 10(4) cm(-3), and tended to follow the diurnal traffic flow patterns. The N(TOTAL) was dominated by particles < or =100 nm in diameter which accounted for between 89-93% of the measured particle number. By use of a log-normal fitting procedure, the modal parameters of the number based particle size distribution of urban airborne particulates were derived from the roadside measurements. Four component modes were identified. Two nucleation modes were found, with a smaller, more minor, mode composed principally of sub-11 nm particles, believed to be derived from particles formed from the nucleation of gaseous species in the atmosphere. A second mode, much larger in terms of number, was composed of particles within the size range of 10-20 nm. This second mode was believed to be principally derived from the condensation of the unburned fuel and lube oil (the solvent organic fraction or SOF) as it cooled on leaving the engine exhaust. Third and fourth modes were noted within the size ranges of 28-65 nm and 100-160 nm, respectively. The third mode was believed to be representative of internally mixed Aitken mode particles composed of a soot/ash core with an adsorbed layer of readily volatilisable material. The fourth mode was believed to be composed of chemically aged, secondary particles. The larger nucleation and Aitken modes accounted for between 80-90% of the measured N(TOTAL), and the particles in these modes were believed to be derived from SI and diesel engine emissions. The overall size distribution, particularly in modes II-IV, was observed to be strongly related to the number of primary particle emissions, with larger count median diameters observed under conditions where low numbers of primary soot based particles were present.     

Sediment influence on congener-specific PCB bioaccumulation by Mytilus edulis: a case study from an intertidal hot spot, Clyde Estuary, UK

An intertidal site in the Clyde Estuary, UK, was selected to evaluate the role of sediment geochemistry on the bioaccumulation of polychlorinated biphenyls (PCBs) by mussels (Mytilus edulis). The area had previously been identified as showing anomalously high levels of PCB contamination (over 1,500 microg kg(-1) total PCB in sediment, 22 congeners). Samples of surface sediment and M. edulis were collected from two closely located sites, one within the anomalous area and another representing typical PCB contamination in the estuary. Sediment samples were separated into grain size fractions and analysed for a range of biomarker compounds, PCBs and sediment mineralogy. The anomalous site showed an atypical association of PCBs with sediment properties, despite both locations showing influence of both petrogenic and pyrogenic organic contamination. Interrogation of data using correlation and principal component analysis showed that sediment mineralogy as well as organic matter composition influenced PCB congener distribution. One sediment source was found to control the PCB concentration in mussels at both locations and clay mineralogy appears to control PCB uptake by biota with preference for higher molecular weight congeners. Overall bioavailability is determined by sediment TOC.     

Characterization of organic coatings on hygroscopic salt particles and their atmospheric impacts

The photooxidation of α-pinene in the presence of NO₂, with and without added NaNO₃ seed particles, has been studied in a large-diameter flow tube. Particles formed by homogeneous nucleation and by condensation on the pre-existing seeds were sampled at various stages of the reaction, dried using four diffusion dryers, size selected at different mobility diameters (d_m) using a differential mobility analyzer (DMA), and characterized with a single particle mass spectrometer (SPLAT II). It was found that homogeneously nucleated particles are spherical, have a density (ρ) of 1.25 ± 0.02 g cm^?3 (±2σ) and contain a significant amount of organic nitrates. The mass spectra of the low volatility products condensed on the NaNO₃ seed particles were found to be virtually the same as in the case of homogeneous nucleation. The data show that the presence of even a submonolayer of organics on the NaNO₃ particles causes water retention that leads to a decrease in particle density and that the amount of water retained increases with organic coating thickness. Thicker coatings appear to inhibit water evaporation from the particle seeds altogether. This suggests that in the atmosphere, where low volatility organics are plentiful, some hygroscopic salts will retain water and have different densities and refractive indices than expected in the absence of the organic coating. This water retention combined with the organic shell on the particles can potentially impact light scattering by these particles and activity as cloud condensation nuclei (CCN), as well as heterogeneous chemistry and photochemistry on the particles.     

Simulation of Combined Best Management Practices and Low Impact Development for Sustainable Stormwater Management1

Damodaram, Chandana, Marcio H. Giacomoni, C. Prakash Khedun, Hillary Holmes, Andrea Ryan, William Saour, and Emily M. Zechman, 2010. Simulation of Combined Best Management Practices and Low Impact Development for Sustainable Stormwater Management. Journal of the American Water Resources Association (JAWRA) 1-12. DOI: 10.1111/j.1752-1688.2010.00462.x Abstract: Urbanization causes increased stormwater runoff volumes, leading to erosion, flooding, and the degradation of instream ecosystem health. Although Best Management Practices (BMPs) are used widely as a means for controlling flood runoff events, Low Impact Development (LID) options have been proposed as an alternative approach to better mimic the natural flow regime by using decentralized designs to control stormwater runoff at the source, rather than at a centralized location in the watershed. For highly urbanized areas, LID practices such as rainwater harvesting, green roofs, and permeable pavements can be used to retrofit existing infrastructure and reduce runoff volumes and peak flows. This paper describes a modeling approach to incorporate these LID practices in an existing hydrologic model to estimate the effects of LID choices on streamflow. The modeling approach has been applied to a watershed located on the campus of Texas A&M University in College Station, Texas, to predict the stormwater reductions resulting from retrofitting existing infrastructure with LID technologies. Results demonstrate that use of these LID practices yield significant stormwater control for small events and less control for flood events. A combined BMP-LID approach is tested for runoff control for both flood and frequent rainfall events.     

Estimating PAH sources in harbor sediments using diagnostic ratios

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous in the global environment and are subsequently transported into aquatic sediments. As PAHs are formed by various processes, source identification using diagnostic ratios can provide insight to PAH emission sources to distinguish between pyrogenic and petrogenic PAH sources. PAH diagnostic ratios were applied as a forensic source apportionment technique to assess aggregate historical sediment data from 31 small craft harbors (SCHs) across Nova Scotia, Canada. Multiple diagnostic ratios suggest that PAHs present in Nova Scotia SCH sediments are pyrogenic (combustion) in origin, while consistently suggesting that coal‐related PAH sources are potential dominant specific sources. National Institute of Standards and Technology Standard Reference Materials (SRMs) were used as reference for coal tar, urban dust, and diesel exhaust particulates in ratio applications. The SRM for coal tar was most similar to Nova Scotia SCH sediments in multiple ratio applications. Diagnostic ratio results were corroborated by comparing the PAH profile of sediments to source profiles from the literature. Results indicate that Nova Scotia SCH sediments follow global trends by exhibiting a dominant pyrogenic PAH signature, and the specific coal‐related PAH signature of Nova Scotia SCH sediments may be influenced by contamination inputs related to historical industrial coal mining and combustion activities in the province.     

National-Level Wetland Policy Specificity and Goals Vary According to Political and Economic Indicators

Environmental Management - Growing recognition of the importance of wetlands to human and ecosystem well-being has led countries worldwide to implement wetland protection policies. Different...     

Apportionment of bioavailable phosphorus loads entering Cayuga Lake,New York

The integration of the phosphorus (P) bioavailability concept into a P loading analysis for Cayuga Lake, New York, is documented. Components of the analyses included the: (1) monitoring of particulate P (PP), soluble unreactive P (SUP), and soluble reactive P (SRP), supported by biweekly and runoff event‐based sampling of the lake's four largest tributaries; (2) development of relationships between tributary P concentrations and flow; (3) algal bioavailability assays of PP, SUP, and SRP from primary tributaries and the three largest point sources; and (4) development of P loading estimates to apportion contributions according to individual nonpoint and point sources, and to represent the effects of interannual variations in tributary flows on P loads. Tributary SRP, SUP, and PP are demonstrated to be completely, mostly, and less bioavailable, respectively. The highest mean bioavailability for PP was observed for the stream with the highest agriculture land use. Point source contributions to the total bioavailable P load (BAP_L) are minor (5%), reflecting the benefit of reductions from recent treatment upgrades. The BAP_L represented only about 26% of the total P load, because of the large contribution of the low bioavailable PP component. Most of BAP_L (>70%) is received during high flow intervals. Large interannual variations in tributary flow and coupled BAP_L will tend to mask future responses to changes in individual inputs.     

“Because we are all people”: outcomes and reflections from young people's participation in the planning and design of child-friendly public spaces

Child-Friendly Cities were conceived as a means to integrate children's rights into city decision-making and governance. Participatory research about child-friendly cities consistently finds overarching themes across ages and regions: children desire access to services, nature, and play; freedom from physical danger; and opportunities for inclusion within the city. This article explores a two-year visioning and participatory design process that engaged approximately 225 young people, aged 4–16, in the planning and design of a prominent public space in the City of Boulder. While participatory research with children has received much attention in the academic literature, much less attention has been given to what can be achieved through sustained integration of children into municipal planning processes, particularly in the USA. This paper thus moves children's participation beyond rhetoric and into the challenging reality of planning a city with children as a valued constituent.