Performances and application of a passive sampling method for the simultaneous determination of nitrogen dioxide and sulfur dioxide in ambient air

The performances and applicability of a diffusion tubesampler for the simultaneous measurements of NO₂ andSO₂ in ambient air were evaluated. SO₂ andNO₂are collected by the passive sampler using triethanolamine astrapping agent and are determined as sulphate and nitrite withion chromatography. The detection limit (2.3 g m^-3 ofNO₂ and 4.2 g m^-3 of SO₂ for two weekssampling) is adequate for the determination of concentrationsin urban and industrial areas. Precision of the method as RSDis in mean 5% for NO₂ and 12% for SO₂ at theconcentration levels in urban areas. Calibration of the methodwas performed in the field conditions by comparison between theresponses of sampler and the concentrations measured by thecontinuous monitors. High degree of linearity (correlationcoefficients > 0.8) is found between the passive sampler tubeand the continuous monitor data for both NO₂ and SO₂.To reduce the wind velocity influence on passive sampling ofdiffusion tubes, a protective shelter was tested in this study.The overall uncertainty of one measure for the optimised methodis estimated at 5 g m^-3 for NO₂ and 6g m^-3 for SO₂. Suitability of this passivesampling method for air pollution monitoring in urban areas wasdemonstrated by the results shown in this paper on a campaigncarried out in the French agglomeration.     

Spectral fitting approach for the determination of enrichment and contamination factors in mining sediments using laser-induced breakdown spectroscopy

Environmental Science and Pollution Research - Monitoring of pollution index values in sediments is crucial in assessing the environmental impacts of toxic metals in a given location. These indices...     

Double genetically modified symbiotic system for improved Cu phytostabilization in legume roots

Environmental Science and Pollution Research - Excess copper (Cu) in soils has deleterious effects on plant growth and can pose a risk to human health. In the last decade, legume-rhizobium...     

Recycling extruded polystyrene by dissolution with suitable solvents

The amount of extruded polystyrene (XPS) waste has increased in recent years due to the increase of its use in the thermal insulation of buildings, transport vehicles, and refrigerators, among others. Dissolution with suitable solvents to achieve a volume reduction of more than 100 times without degradation of polymer chains is one of the cheapest and most efficient methods of recycling XPS. Several environmentally friendly solvents have been tested as dissolution agents for XPS volume reduction; the action of these solvents does not produce any degradation of polymer chains. The solubility of the polymer in such solvents at different temperatures was investigated. The solvent can be easily recycled by distillation, obtaining a high-quality recycled polymer. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Pilot study on the influence of stress caused by the need to combine work and family on occupational accidents in working women

The influx of a large number of women into the workforce involves the need for these women to combine family and work responsibilities. Multiple roles lead to work–family conflict. This study analyzes the influence of work–family conflict on the causes of minor occupational accidents suffered by working women. A survey was done on working women in the Madrid region, who had suffered a minor occupational accident in 2004. The main finding was that nearly half of the women with children considered that the stress and fatigue caused by trying to combine work and family played a part in the accident; 21% of the respondents whose accidents took place while traveling to or from work and 11% the respondents who suffered the accident in the workplace said that family reasons played a part. Additionally, 50% of the women suffered after-effects as a result of the accident; children had to change their routine in almost 1 in 4 cases; nearly a quarter of the respondents said their work situation had been temporarily modified. This point to a need for polices that encourage men and employers to contribute more to solve work–family conflicts.     

Simultaneous measurements of formaldehyde and nitrous acid in dews and gas phase in the atmosphere of Santiago,Chile

The amounts of formaldehyde and nitrous acid (HONO) in gas phase and dews of Santiago de Chile were simultaneously measured. Formaldehyde concentrations values in the liquid phase (dews) correlate fairly well with those in the gaseous phase and are even higher than those expected from gas–dew equilibrium. On the other hand, nitrite concentrations in dews were considerably smaller (ca. 15 times) than those expected from the gas-phase concentrations. This under-saturation is attributed to diffusion limitations due to the relatively large HONO solubility. In agreement with this, under-saturation increases with the rate of dew formation and the pH of the collected waters, factors that should increase the rate of gas to liquid HONO transfer required to reach equilibrium.     

Multi-causal and integrated assessment of sustainability: the case of agriculturization in the Argentine Pampas

Assessing the sustainability of complex development processes requires multi-causal and integrated analyses. We develop a system-based methodology, rooted in interdisciplinary discussion and consensus building between 15 experts, to construct a multi-causal diagram which examines the sustainability of the Argentine Pampas′ process of agriculturization. The resulting diagram includes 25 factors and provides a big-picture of the multiple dimensions and interrelations affecting sustainability. According to this examination, the increasing concentration of production and the incorporation of technological innovations, triggered by economic and institutional factors, are the cause of environmental distresses and social changes, whose consequences for sustainability are still highly disputed. Nevertheless, the symptoms of both environmental and social unsustainability are more evident in the case of the extra-Pampean regions than in the Pampas. This suggests that the Pampean agriculture model should not be transferred to these regions without substantial modifications. The experts did not reach consensus on whether the agriculturization process is overall sustainable or unsustainable. Lack of consensus revolved mainly around opposing perspectives regarding the significance of the threats to environmental sustainability. The magnitude of socio-distributive unbalance and loss of rural jobs were also contentious. Yet, the paper shows how the exercise of building a joint causal diagram was undoubtedly helpful for linking piece-meal disciplinary facts, brought in from all fronts, into a comprehensive and coherent picture. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Exploring management strategies for community-based forests using multi-agent systems: A case study in Palawan, Philippines

This paper describes the experiences and lessons learned in applying a multi-agent systems (MAS) model to study the dynamics and complex interactions among stakeholders in the management of community-based forests. The MAS model is developed using the companion modelling (ComMod) approach, which allows for a collaborative development of the model between the stakeholders and researchers. This approach involves the development and application of role-playing games (RPGs) and computer simulation as learning tools and to validate the model. Inferences are drawn from the learning and negotiation processes that the stakeholders and researchers underwent in the collaborative development of the MAS model. These processes ultimately led to the development of a collaborative resource management plan. The approach and the MAS model were applied to a case study involving a community-based forest managed by three villages in the island of Palawan, Philippines.     

Preparation and characterization of ceramic products by thermal treatment of sewage sludge ashes mixed with different additives

The study of the ceramic characteristics of sludge ashes, alone or mixed with additives (kaolin, montmorillonite, illitic clay, powdered flat glass) includes characterization of additives, preparation of probes (dry or wet mixed), thermal treatment (up to 1200 degrees C, except melting or deformation) and control (densities, compressive strengths and water absorption). Thermal treatment increases the density and compressive strength of probes (both parameters go through maxima, with later decreases) and decreases the absorption of water. The densification is also revealed by the evolution of the ratio of decrease of volume/loss of mass. The maximum values of compressive strengths were obtained for 25% of illitic clay, montmorillonite and glass powder. Densification concerning probes with sludge ashes alone does not occur with kaolin. Experimental data were adjusted to exponential relationships between compressive strengths and densities for every composition, and also to a general equation for all probes. The apparent density obtained was adjusted to a non-linear dependence with temperature, leading to a maximum in density and permitting calculating the temperature of occurrence of this maximum. The adjustment was not possible for probes containing kaolin, requiring presumably higher temperatures to densify. Water absorption has low values for ashes or kaolin probes, intermediate values for illite and powdered flat glass probes and high values for montmorillonite probes. Excepting with kaolin, ceramic materials with better characteristics than sludge ashes without additives were obtained at lower treatment temperatures.