Mining and the environment: a case study from Bijolia quarrying site in Rajasthan, India

Mining is essentially a destructive developmental activity, where ecology suffers at the altar of economy. Unfortunately, in most regions of the Earth, the underground geological resources are superimposed by biological resources (forests). This is particularly evident in India. Hence mining operations necessarily involve deforestation, habitat destruction, biodiversity erosion and destruction of geological records which contain information about past biodiversity. Extraction and the processing of ores and minerals also lead to widespread environmental pollution.However, mankind cannot afford to give up the underground geological resources which are the basic raw materials for development. An unspoiled nature can provide ecological security to people but cannot bring economic prosperity. Scientific mining operations accompanied by ecological restoration and regeneration of mined wastelands and judicious use of geological resources, with search for eco-friendly substitutes and alternatives must provide the answer.A case study from the Bijolia quarrying area in Rajasthan, India, provides some sensational revelations of the impact of mining on the human ecosystem.     

Comparative growth response of two varieties of <Emphasis Type="Italic">Vigna radiata</Emphasis> L. (var. PDM 54 and var. NM 1) grown on different tannery sludge applications: effects of treated wastewater and ground water used for irrigation

This study evaluates the possibility of using contaminated soil by treated tannery wastewater and the use of tannery sludge in agriculture. The plants of Vigna radiata var. PDM 54 grown on contaminated soil and irrigated with ground water have not shown the translocation of toxic metal (Cr) in the upper part. The biomass of the plant increased when irrigated with treated tannery wastewater compared to ground water, whereas no significant change was observed in chlorophyll and protein contents. In both the varieties (var. PDM 54 and var. NM 1) of V. radiata grown on tannery sludge amendments, the growth parameters exhibited a pronounced positive growth response up to 35% tannery sludge amendments compared with the plants grown on garden soil. Despite the Cr accumulation at lower amendments, no toxicity symptoms were observed in both the varieties of the plants. Higher amendments affected various growth parameters, NR activity, and carbohydrate content of the plants. The results suggest that the plants of V. radiata (var. PDM 54) may be grown on contaminated soil or lower sludge amendments and irrigated with ground water. No translocation of toxic metal Cr was found in the seeds of the plants grown in up to 25% tannery sludge. However, periodical monitoring is required before the consumption of seeds. Overall, the results showed that plant growth patterns were influenced to some extent by the level of soil contamination and the water used for irrigation.     

Modeling of 2-chloronaphthalene interaction with high carbon iron filings (HCIF) in semi-batch and continuous systems

Unrusted high carbon iron filings (HCIF) were contacted sequentially with successive aliquots of aqueous 2-chloronaphthalene (2-CN), i.e., in semi-batch mode, both in well-mixed and poorly-mixed conditions. Aqueous concentration of 2-CN and the dehalogenation by-product naphthalene (N) were monitored at the beginning and end of each 2-CN addition cycle. Experimental data was modeled using the 2-CN dehalogenation and adsorption/desorption rate constants determined from batch experiments involving 2-CN and a similar HCIF sample. Model predictions for the semi-batch experiments matched quite well with the experimental data in both well-mixed and poorly-mixed cases. Further, it was experimentally demonstrated that adsorption and hence accumulation of N on HCIF surface did not substantially hinder either 2-CN adsorption or dehalogenation under the conditions examined in this study. Continuous transport of water containing 0.5 μmol L^?1 2-CN through a 1.0-m thick unrusted HCIF layer was simulated at superficial velocities of 0.01 and 0.10 m h^?1. Both simulations indicated nearly complete removal of 2-CN in the HCIF layer. This study suggests that HCIF can be used as a potential reactive material in permeable reactive barriers (PRBs) for in situ remediation of groundwater contaminated with 2-CN.     

Automobile pollution in India and its human impact

Summary Automobiles are a necessary evil, while they have made living easy and convenient, they have also made human life more complicated and vulnerable to both toxic emissions and an increased risk of accidents. Urban people are most affected and amongst the worst sufferers are traffic policemen who are particularly close to the fumes of automobile exhaust. Studies made in Jaipur, India, indicate that there is high rate of occurrence of respiratory, digestive, ocular and skin problems amongst the traffic policemen and a significant number of them become victims of lung disorders in the very first few months of their posting to a traffic department. Traffic policement everywhere should wear pollution masks for their own safety and to arouse public awareness of the risk of automobile pollution.Dr Rajiv K. Sinha is Assistant Professor in Human Ecology at the Indira Gandhi Centre of Human Ecology, Environmental and Population Studies at the University of Rajasthan. He was formerly a teaching assistant at University of Windsor,     

Effect of lead on growth and nitrate assimilation of Vigna radiata (L.) Wilczek seedlings in a salt affected environment

The inhibition of seedling growth and nitrate reductase activity in 5 d old Vigna radiata (L.) Wilczek cv. Pusa Baisakhi in the presence of 1.0 mM lead acetate increased drastically, if NaCl (6 and 12 EC) was also present in the nutrient media along with the metal salt. Correspondingly higher endogenous Na+ levels were accumulated in the roots and leaves of seedlings in presence of the two stresses. On the other hand, the levels of endogenous lead get reduced in presence of NaCl in both the roots and leaves. Roots accumulated more Pb2+ and Na+ than the leaves. The two stresses affect more drastically in the additive or even synergistic manner during the early growth phase of the seedlings.     

The effect of long-term atmospheric CO2 enrichment on the intrinsic water-use efficiency of sour orange trees

Every two months of 1992, as well as on three occasions in 1994-1995, we obtained leaf samples together with samples of surrounding air from eight well-watered and fertilized sour orange (Citrus aurantium L.) trees that were growing out-of-doors at Phoenix, Arizona, USA. These trees had been planted in the ground as small seedlings in July of 1987 and enclosed in pairs by four clear-plastic-wall open-top chambers of which two have been continuously maintained since November of that year at a CO2 concentration of 400 micromol mol(-1) and two have been maintained at 700 micromol mol(-1). In September 2000, we also extracted north-south and east-west oriented wood cores that passed through the center of each tree's trunk at a height of 45 cm above the ground. Stable-carbon isotope ratios (13C/12C) derived from these leaf, wood and air samples were used to evaluate each tree's intrinsic water-use efficiency (iWUE). The grand-average result was an 80% increase in this important plant parameter in response to the 300 micromol mol(-1) increase in atmospheric CO2 concentration employed in the study. This increase in sour orange tree iWUE is identical to the long-term CO2-induced increase in the trees' production of wood and fruit biomass, which suggests there could be little to no change in total water-use per unit land area for this species as the air's CO2 content continues to rise. It is also identical to the increase in the mean iWUE reported for 23 groups of naturally occurring trees scattered across western North America that was caused by the historical rise in the air's CO2 content that occurred between 1800 and 1985.     

A correlation of secondary aerosol (nitrate and sulfate) with respirable particulate matter (RPM) in ambient air at different traffic junctions of Vadodara city

The correlation study of secondary aerosol (nitrate and sulfate) with RPM in ambient air at different traffic junctions of Vadodara city is reported. RPM was analyzed using Ion Chromatography technique and measured the level of nitrate and sulfate in ambient air. The correlation studies of these particulates with RPM have been established. The average concentration of sulfate and nitrate in ambient air was found 35.74 microg/m3 and 24.22 microg/m3, which ranged of 5.33-84.69 and 1.93-77.86 microg/m3 respectively. The correlation of RPM and SO4 (r = 0.813, P<0.01), RPM-NO3 (r = 0.5549, P<0.01) and SO4-NO3 (r = 0.6133, P<0.01) were found significant. The presence of sulfate and nitrate in RPM is 8.25% and 5.60% . The pH of water extract of RPM averaged 6.81, which ranged 6.17-7.28. Regression analysis result showed that the relationship between RPM-SO4 was significantly (R2=0.66215) correlated. This indicate that probably the secondary aerosols such as nitrate and sulfate in excess may cause irritation and increasing lung disease.     

Translocation of metals from fly ash amended soil in the plant of Sesbania cannabina L. Ritz: effect on antioxidants

The plants of Sesbania cannabina Ritz grown on different amendments of fly ash (FA), have shown a high accumulation of metals (Fe, Mn, Zn, Cu, Pb and Ni). The highest accumulation of Fe the and lowest level of Ni were recorded in these plants. The different amendments of fly ash with garden soil (GS) were extracted with DTPA and the levels of metals were found to be decreased with an increase in fly ash application ratio from 10% to 50% FA. The analysis of the results showed an increase in the level of malondialdehyde (MDA) content of the roots for all the exposure periods. The maximum increases of 136% (roots) and 120% (leaves) were observed in MDA content at 100% FA after 30 d of growth of the plant, compared to GS. The level of antioxidants was found to increase for all the exposure periods in the roots of the plants to combat metal stress. At 30 d, the maximum increase of 57% (ascorbic acid) and 78% (free proline) was observed in the roots of the plants grown on 100% and 10% FA, respectively, as compared to their respective GS. At 90 d, a maximum increase of 42% (cysteine) and 117% (NPSH) was recorded in the roots of the plants grown on 25% and 100% FA, respectively, as compared to their respective GS. In leaves, a significant increase in antioxidants i.e. cysteine, NPSH and free proline content was recorded after 30 d, whereas no such trend was observed for the rest of the exposure periods. The chlorophyll and carotenoid contents increased with an increase in the FA amendment ratio from 10% to 50% FA for all the exposure periods as compared to GS. In both roots and leaves, the level of protein content increased in all the amendments and 100% FA at 30 d as compared to GS. Thus, there is a balance in the level of MDA content and level of antioxidants in the plants at 90 d. In view of its tolerance, the plants may be used for phytoremediation of metals from fly ash contaminated sites and suitable species for plantation on fly ash land fills.     

Towards environmentally sustainable industrialization: a case study of some mini iron and steel industries in India

Summary Iron and steel have been used in India since ancient times (possibly as early as 5000 BC). There are several references to the use of iron and steel in the Vedic literatures. The rust and corrosionfree iron pillar of Qutub Minar in Delhi, built 1500 years ago and the steel girders used in the temples of Orissa around AD 700–1200 still bear the testimony of these early industries. Steels are in great demand today but the large steel plants provide a limited range of steel mostly consumed in building and construction activities. In India, heavy machine tools, locomotives, automobiles, aviation, ship building and engineering tools require super grade steels with various specifications and these are met by mini iron and steel industrial plants. There are approximately 160 such plants mostly situated in big cities and towns. There are several economic and ecological advantages of these mini steel plants. They mostly use iron and steel scrap and other kinds of iron wastes from large industries as their raw material, contrary to the large plants which use iron ores as primary raw materials, the extraction processing and utilization of which involves severe environmental damage by way of deforestation and air and water pollution. Mini steel plants consume much less water and energy. The government of India has given a number of incentives to the mini steel industries by way of exemption from income tax, custom and excise duties, depreciation and investment allowances and rebates on charges for consumption of water and electricity.Dr Rajiv K. Sinha is an assistant professor in human ecology at the University of Rajasthan. Mr V.N. Bhargava is an engineer employed at the Research and Development Division of National Engineering Industries, Khatipura Road, Jaipur 302006, India.