Photodegradation of Poly(lactic acid) Stereocomplex by UV-Irradiation

Neat poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) films and PLLA/PDLA blend films were prepared by solution casting, and their photodegradation by UV-irradiation was investigated using wide-angle X-ray scattering (WAXS), gel permeation chromatography, differential scanning calorimetry, tensile testing, and polarized optical microscopy. The PLLA/PDLA blend film was more photodegradation-resistant than the neat PLLA and PDLA films when photodegradation was monitored by molecular weight, melting temperature, and WAXS crystalline peak positions. This indicates that the chains in both amorphous and crystalline regions of the PLLA/PDLA blend film were photo-cleavage-resistant compared to those of the neat PLLA and PDLA films. The changes in melting temperature and WAXS crystalline peak positions before and after photodegradation respectively indicated the increased crystalline lattice disorder and the decreased crystalline lattice sizes of the neat PLLA and PDLA films, whereas these changes were insignificant for the blend films. Photodegradation caused no significant change in tensile properties, with the exception of significant decreases in the tensile strength and elongation at break of PLLA/PDLA blend film. However, the tensile strength and elongation at break of the PLLA/PDLA blend film retained higher values compared to those of the neat PLLA and PDLA films during photodegradation. In spite of the slower photodegradation of the PLLA/PDLA blend film traced by M _n, T _m, and WAXS crystalline peak positions than that of neat PLLA and PDLA films, the rapid decrease in tensile strength and elongation at break of the former than that of the latter should be due to the highly-ordered structural difference between them, i.e., the three dimensional dry gel of the former and the spherulites of the latter.     

Chitin biodegradation and wound healing in tree bark tissues

Chitin biodegradation and wounded bark tissue healing were demonstrated in several evergreen and deciduous trees by dressing with a sheet of chitin-containing films or sponges. Chitinase activities in the tree bark tissues around the wounds were enhanced by this treatment up to four times those of the untreated wounds. Significant seasonal changes of chitinase activities were observed with the bark and leaf tissues of deciduous trees, but few with those of evergreen trees. A sheet of chitin films implanted or dressed in the tree bark tissues was biodegraded within 4 to 24 weeks after implantation and was assimilated into the wounded bark tissues, resulting in the stimulation of the wounded bark tissue healing.     

Biochemical and Genetic Characterization of an Extracellular Poly(3-Hydroxybutyrate) Depolymerase from Acidovorax Sp. Strain TP4

To determine the properties of enzymes from bacteria that degrade polypropiolactone (PPL), we isolated 13 PPL-degrading bacteria from pond water, river water, and soil. Nine of these strains were identified as Acidovorax sp., three as Variovorax paradoxus, and one as Sphingomonas paucimobilis. All the isolates also degraded poly(3-hydroxybutyrate) (PHB). A PPL-degrading enzyme was purified to electrophoretical homogeneity from one of these bacteria, designated Acidovorax sp. TP4. The purified enzyme also degraded PHB. The molecular weight of the enzyme was estimated as about 50,000. The enzyme activity was inhibited by diisopropylfluorophosphate, dithiothreitol, and Triton X-100. The structural gene of the depolymerase was cloned in Escherichia coli. The nucleotide sequence of the cloned DNA fragment contained an open reading frame (1476 bp) specifying a protein with a deduced molecular weight of 50,961 (491 amino acids). The deduced overall sequence was very similar to that of a PHB depolymerase of Comamonas acidovorans YM1609. From these results it was concluded that the isolated PPL-degrading enzyme belongs to the class of PHB depolymerases. A conserved amino acid sequence, Gly-X₁-Ser-X₂-Gly (lipase box), was found at the N-terminal side of the amino acid sequence. Site-directed mutagenesis of the TP4 enzyme confirmed that ²⁰Ser in the lipase box was essential for the enzyme activity. This is the first report of the isolation a PHB depolymerase from Acidovorax.     

STOCHASTIC FLOW DURATION CURVES FOR EVALUATION OF FLOW REGIMES IN RIVERS1

ABSTRACT: A stochastic estimation of low flow in the upper reaches of streams is needed for the planning, development, and management of water resources and/or water use systems. In this paper, the definition and development procedure for the stochastic flow duration curve is presented and applied to five catchments located in eastern Japan and to two catchments in western Thailand. The probability distribution of N‐year daily discharge data is extracted at various percentages of time for which specified discharges are equaled or exceeded in a water year. Such a distribution is usually represented with a straight line on log‐normal probability paper. However, some of the probability plots for the annual minimum daily discharge are best represented with a straight line on Weibull probability paper. The effectiveness of the stochastic flow duration curve defined for the evaluation of flow regime is illustrated through its application. The ten year probability for the discharge exceeded 97 percent of the time may be recognized as an index of low flow. The recession shape of the lower part of the flow duration curve is dependent on the strength of low flow persistence.     

How do different process options and evaluation settings affect economic and environmental assessments? A case study on methyl methacrylate (MMA) production processes

We present an investigation on how economic and environmental assessment results change when different process options or evaluation settings are considered. As the main case study the production technology of methyl methacrylate (MMA) is investigated. Six commercial processes using different reaction routes are modelled and evaluated with respect to their economic and environmental performance. On these six base case models different process options and evaluation settings are considered and the resulting impacts on the assessment results are quantified. Major findings of the study are that the more decision-variables become fixed, the smaller becomes the impact of the decisions still to be taken—but not only with respect to the economic performance but also with regard to the environmental assessment result. Along the process development steps the potential impacts on the economic and environmental performance decrease to the same degree. The results obtained for the evaluation settings do not show such a systematic pattern as those for the process options. This finding indicates that decision makers face many options in the economic and especially the environmental assessment of chemical processes which might lead to quite different magnitudes in variability due to either the choice of method or the choice of method parameters. This paper demonstrates that the resulting variability might be crucial with respect to the decision making outcome.     

International recycling firm joint ventures and optimal recycling standards

Environmental Economics and Policy Studies - In this paper, we consider a Southern economy consisting of an upstream duopoly market for recycled materials and a downstream perfectly competitive...     

Study on dechlorination technology for municipal waste plastics containing polyvinyl chloride and polyethylene terephthalate

It is necessary to remove chlorine efficiently from municipal waste plastics (MWP) that contain polyvinyl chloride (PVC) and other plastics containing chlorine. In this article we consider thermal degradation liquefaction technology. In Japan, the chlorine content of reclamation oil products must be kept below 100 ppm owing to the quality standard for pyrolysis oil. Liquefaction dechlorination technology for MWP is still an important issue to study. The twin-screw extruder that has been developed as dechlorination technology for blast furnaces and coke ovens has a shorter residence time for dechlorination than other dechlorination technologies. In this article, we used a single-screw extruder for the dechlorination process because it also has a short residence time. Experiments on the dechlorination process were carried out by using a single-screw extruder to assess its dechlorination performance. Practical use of the single-screw was demonstrated by the operation of a commercial oil reclamation plant operated by Sapporo Plastic Recycle Co., Ltd. (SPR). Moreover, an investigation of cascade recycling was carried out in 2008 in which material recycle wastes were mixed with MWP and processed by chemical recycling (liquefaction). It was demonstrated that cascade recycling is an efficient recycling combination and contributes to local feedstock recycling. However, it was shown that MR wastes affect the quality of the reclamation oil when they make up more than 40% of the feed mix. If the quantity of MR wastes is kept below 40%, the reclamation oil is able to meet the quality standard. The SPR plant can be operated safely and in a stable manner.     

The cost of stratospheric climate engineering revisited

Stratospheric aerosol injection (SAI) has been receiving increasing attention as a possible option for climate engineering. Its direct cost is perceived to be low, which has implications for international governance of this emerging technology. Here, we critically synthesize previous estimates of the underlying parameters and examine the total costs of SAI. It is evident that there have been inconsistencies in some assumptions and the application of overly optimistic parameter values in previous studies, which have led to an overall underestimation of the cost of aircraft-based SAI with sulfate aerosols. The annual cost of SAI to achieve cooling of 2 W/m² could reach US$10 billion with newly designed aircraft, which contrasts with the oft-quoted estimate of “a few billion dollars.” If existing aircraft were used, the cost would be expected to increase further. An SAI operation would be a large-scale engineering undertaking, possibly requiring a fleet of approximately 1,000 aircraft, because of the required high altitude of the injection. Therefore, because of its significance, a more thorough investigation of the engineering aspects of SAI and the associated uncertainties is warranted.     

Compilation and application of a primary PM2.5 emissions inventory with high sectoral resolution in Japan

To elucidate the macro-structure of the PM_2.5 emissions generated by Japan's economic activities, this paper presents an emission inventory of primary particles of PM_2.5 with high sectoral resolution based on the Japanese Input–Output Tables, comprising some 400 sectors. These primary PM_2.5 emissions were estimated by multiplying the estimated energy consumption associated with each fuel type by a PM₁₀ emission factor incorporating the technological level of dust collection in each sector and the mass ratio of PM_2.5 to PM₁₀. Non-energy emissions from agricultural open burning were also determined. Total PM_2.5 emissions in 2000 were 252 kt, 49% of which were due to mobile emission sources. Changes in total PM_2.5 emissions between 1990 and 2000 were also calculated. This showed that a substantial increase in energy sector emissions due to rising coal consumption was offset by a sharp decline in emissions from road vehicles and shipping vessels, resulting in an overall decrease in total emissions. In addition, the emissions induced by economic demand in each sector were quantified by means of input–output analysis, which revealed that demand for construction, foods and communications and services constituted the principal causes of real domestic emissions. An assessment of sectoral contributions to PM_2.5 emissions that takes into account the effects of human exposure, expressed as external costs, suggests that the contribution of transportation is greater than indicated on the grounds of direct emissions alone.