Comparative study of microbial dechlorination of chlorinated ethenes in an aquifer and a clayey aquitard

In order to determine whether natural attenuation of chlorinated ethenes by microbial activity occurs in aquitards, sediments at a site contaminated with tetrachloroethene were vertically studied by drilling. The distribution of microbes (Dehalococcoides group and anaerobic hydrogen producers) and the ability of the sediments to sustain microbial dechlorination were determined in an aquitard as well as in an aquifer. Close-spaced sampling revealed the existence of large populations of Dehalococcoides and H(2)-producing bacteria, especially in the organic-rich clayey aquitard rather than in the aquifer. The vinyl chloride reductase gene was also detected in the clay layer. Furthermore, incubation experiments indicated that the clay sediment could sustain transformations of tetrachloroethene at least to vinyl chloride. In contrast, no significant transformation was observed in the aquifer sand. Our results indicate that dechlorination of tetrachloroethene by bacteria can take place in an organic-rich clayey aquitard, and that organic-rich clay may also be important in the natural attenuation in an adjacent aquifer, possibly supplying a carbon source or an electron donor.     

Development of active and diffusive sampling methods for determination of 3-methoxybutyl acetate in workplace air

Monitoring of the workplace concentration of 3-methoxybutyl acetate (MBA), which is used in printer's ink and thinner for screen-printing and as an organic solvent to dissolve various resins, is important for health reasons. An active and a diffusive sampling method, using a gas chromatograph equipped with a flame ionization detector, were developed for the determination of MBA in workplace air. For the active sampling method using an activated charcoal tube, the overall desorption efficiency was 101%, the overall recovery was 104%, and the recovery after 8 days of storage in a refrigerator was more than 90%. For the diffusive sampling method using the 3M 3500 organic vapor monitor, the MBA sampling rate was 19.89 cm(3) min(-1). The linear range was from 0.01 to 96.00 microg ml(-1), with a correlation coefficient of 0.999, and the detection limits of the active and diffusive samplers were 0.04 and 0.07 microg sample(-1), respectively. The geometric mean of stationary sampling and personal sampling in a screen-printing factory were 12.61 and 16.52 ppm, respectively, indicating that both methods can be used to measure MBA in workplace air.     

Effects of copper chloride on formation of polychlorinated dibenzofurans in model waste incineration in a laboratory-scale fluidized-bed reactor

Combustion experiments in a laboratory-scale fluidized-bed reactor have been performed to clarify the effects of copper chloride as a catalyst on polychlorinated dibenzofurans (PCDFs) formation in municipal waste incineration. We used model wastes with and without copper chloride (CuCl2 x 2H2O) as a catalyst, both of which contained polyvinyl chloride (PVC) as a chlorine source. Combustion temperature was set to 900 degrees C, and the amount of air supplied was twice as much as the theoretical amount. The experimental setup had been carefully planned to ensure avoidance of the influences of previous experiments. Results of these present experiments revealed that copper chloride in the waste increased the amount of PCDFs formed and made the homologue profile shifted towards the highly chlorinated species. Copper chloride contributes to PCDFs formation by promoting chlorination via catalytic reactions, whereby the reaction could be important in that organic matters are chlorinated directly by chlorinated compounds related to Deacon reaction such as copper chloride. It was elucidated that characteristic isomer distribution patterns appeared in case the waste contained copper chloride. It is probable in our experiment with copper chloride that PCDFs are mainly formed via catalytic reactions of copper compounds and carbon.     

Effects of copper chloride on formation of polychlorinated dibenzo-p-dioxins in model waste incineration

Combustion experiments in a laboratory-scale fluidized-bed reactor were conducted to elucidate the effects of copper chloride as a catalyst on polychlorinated dibenzo-p-dioxins (PCDDs) formation in municipal waste incineration. We used model wastes with and without copper chloride (CuCl₂ · 2H₂O), both of which contained polyvinyl chloride as a chlorine source. Combustion temperature was set to 900 °C, and the amount of air supplied was twice the stoichiometric ratio. The experimental setup was carefully planned to suppress the influences of experimental conditions except the waste composition. Results of these experiments showed that copper chloride in the waste increased the amount of PCDDs formed and made the homologue profile to shift towards the highly chlorinated species. Copper chloride contributes to the PCDDs formation by promoting chlorination, whereby the reaction is important in that organic matter is chlorinated directly by copper compounds. Copper chloride did not exert a great influence on the isomer distribution patterns of PCDDs, while there appeared a significant difference in the case of PCDFs. This points out the difference of the major formation mechanisms between PCDDs and PCDFs. PCDDs are less formed by the catalytic reactions from carbon/polycyclic aromatic hydrocarbons than PCDFs in our experimental conditions.     

Atmospheric methanethiol emitted from a pulp and paper plant on the shore of Lake Baikal

On-site measurement of methanethiol (CH₃SH) was performed for three years on ships and cars near a pulp and paper plant standing on the shore of Lake Baikal in Siberia, Russia, to investigate the behavior and impact of atmospheric CH₃SH emitted from a point source. Despite its strong odor, there are few reports on atmospheric CH₃SH, while many investigations have been carried out on dimethyl sulfide (DMS). In this work, CH₃SH and DMS were measured every 15 min by a recently developed automated instrument based on single column trapping/separation and chemiluminescence measurement. Hydrogen sulfide, sulfur dioxide and ozone were also measured simultaneously by individual instruments. Of these sulfur compounds, CH₃SH was dominant and its concentration sometimes reached several tens of ppbv. The concentration of CH₃SH was high at night, because of the lack of photodecomposition and local winds from the mountain to the lake. Such time variation was marked in the summer. The CH₃SH level decreased significantly downwind, while decreases in concentrations of other compounds such as DMS and SO₂ were relatively small. From these temporal and spatial variations, the behavior of CH₃SH is described in this paper. The impact of CH₃SH near the Siberian big sources is discussed with the presented data.     

Dry weight, carbon and nitrogen components of caprellid amphipods (Crustacea) inhabiting the Sargassumyezoense community of Otsuchi Bay, northeastern Japan

Dry weight (DW), carbon (C) and nitrogen (N) contents in four species of caprellids, Caprella danilevskii, C. subinermis, C. penantis R-type, and C. verrucosa, inhabiting Sargassumyezoense (Yamada) in Otsuchi Bay, northeastern Japan, were measured based on live specimens. In all species males tend to grow larger than females in pereonite II length, which is used as an indicator of body length, and have greater dry weight, carbon and nitrogen contents. All three parameters (DW, C and N) had highly significant relationships against pereonite II length. Regressions of female pereonite II length against the three parameters significantly differed from males in the four species. Average percentages of carbon and nitrogen contents of the total dry weight ranged from 30.82 to 32.21% and 5.82 to 6.86%, respectively. The carbon/nitrogen ratio tended to decrease against increasing pereonite II length, e.g., 7.2 to 4.3 in C. danilevskii. Received: 25 November 1996 / Accepted: 31 July 1997     

Using turbidity and acoustic backscatter intensity as surrogate measures of suspended sediment concentration in a small subtropical estuary

The suspended sediment concentration is a key element in stream monitoring, although the turbidity and acoustic Doppler backscattering may be suitable surrogate measures. Herein a series of new experiments were conducted in laboratory under controlled conditions using water and mud samples collected in a small subtropical estuary of Eastern Australia. The relationship between suspended sediment concentration and turbidity exhibited a linear relationship, while the relationships between suspended sediment concentration and acoustic backscatter intensity showed a monotonic increase. The calibration curves were affected by both sediment material characteristics and water quality properties, implying that the calibration of an acoustic Doppler system must be performed with the waters and soil materials of the natural system. The results were applied to some field studies in the estuary during which the acoustic Doppler velocimeter was sampled continuously at high frequency. The data yielded the instantaneous suspended sediment flux per unit area in the estuarine zone. They showed some significant fluctuations in instantaneous suspended mass flux, with a net upstream-suspended mass flux during flood tide and net downstream sediment flux during ebb tide. For each tidal cycle, the integration of the suspended sediment flux per unit area data with respect of time yielded some net upstream sediment flux in average.     

Collaborative modelling‐based shelter planning analysis: a case study of the Nagata Elementary School Community in Kobe City,Japan

This study, based on a questionnaire survey and workshops, and with a focus on the impact of an earthquake on the Nagata Elementary School Community in Kobe City, Japan, develops a collaborative model to assess the allocation of residents to shelters. The current official allocation plan is compared with three alternative allocations developed within the framework of this model. The collaborative model identifies accessibility, amenity, capacity, connectivity, continuity, security, and stability as the basic, necessary criteria for shelter planning. The three alternative allocations are very similar to the local residents’ own choice of shelters, but they are quite different from the current official allocation plan, which is supposed to be followed but has achieved relatively low satisfaction among households. The proposed collaborative approach provides an effective tool to assess the officially determined allocation plan by taking into account the viewpoints of local residents, and the results are useful for enhancing community evacuation planning.