莫桑比克的海洋生物学研究:过去、现在及未来

本文概述了莫桑比克包括渔业在内的海洋生物学研究的发展情况.莫桑比克的海岸线约为3000km,海洋的生物资源在莫桑比克的社会中起着重要的作用,主要是作为人们的蛋白质来源以及收入和出口创汇的来源.     

Climate impact from peat utilisation in Sweden

The climate impact from the useof peat for energy production in Sweden hasbeen evaluated in terms of contribution toatmospheric radiative forcing. This wasdone by attempting to answer the question`What will be the climate impact if onewould use 1 m<sup>2</sup> of mire for peatextraction during 20 years?'. Two differentmethods of after-treatment were studied:afforestation and restoration of wetland.The climate impact from a peatland –wetland scenario and a peatland –forestation – bioenergy scenario wascompared to the climate impact from coal,natural gas and forest residues.Sensitivity analyses were performed toevaluate which parameters that areimportant to take into consideration inorder to minimize the climate impact frompeat utilisation. In a `multiple generationscenario' we investigate the climate impactif 1 Mega Joule (MJ) of energy is produced every yearfor 300 years from peat compared to otherenergy sources.The main conclusions from the study are:?The accumulated radiative forcing from the peatland – forestation – bioenergy scenario over a long time perspective (300 years) is estimated to be 1.35 mJ/m²/m² extraction area assuming a medium-high forest growth rate and medium original methane emissions from the virgin mire. This is below the corresponding values for coal 3.13 mJ/ m²/ m² extraction area and natural gas, 1.71 mJ/ m²/ m² extraction area, but higher than the value for forest residues, 0.42 mJ/ m²/ m² extraction area. A `best-best-case' scenario, i.e. with high forest growth rate combined with high `avoided' methane (CH₄) emissions, will generate accumulated radiative forcing comparable to using forest residues for energy production. A `worst-worst-case' scenario, with low growth rate and low `avoided' CH₄ emissions, will generate radiative forcing somewhere in between natural gas and coal.?The accumulated radiative forcing from the peatland – wetland scenario over a 300-year perspective is estimated to be 0.73 –1.80 mJ/ m²/ m² extraction area depending on the assumed carbon (C) uptake rates for the wetland and assuming a medium-high methane emissions from a restored wetland. The corresponding values for coal is 1.88 mJ/ m²/ m² extraction area, for natural gas 1.06 mJ/ m²/ m² extraction area and for forest residues 0.10 mJ/ m²/ m² extraction area. A `best-best-case' scenario (i.e. with high carbon dioxide CO<sub>2</sub>-uptake combined with high `avoided' CH₄ emissions and low methane emissions from the restored wetland) will generate accumulated radiative forcing that decreases and reaches zero after 240 years. A `worst-worst-case' (i.e. with low CO<sub>2</sub>-uptake combined with low `avoided' CH₄ emissions and high methane emissions from the restored wetland) will generate radiative forcing higher than coal over the entire time period.?The accumulated radiative forcing in the `multiple generations' – scenarios over a 300-year perspective producing 1 MJ/year is estimated to be 0.089 mJ/ m<sup>2</sup> for the scenario `Peat forestation – bioenergy', 0.097 mJ/ m² for the scenario `Peat wetland with high CO<sub>2</sub>-uptake' and 0.140 mJ/ m<sup>2</sup> for the scenario `Peat wetland with low CO₂-uptake'. Corresponding values for coal is 0.160 mJ/ m², for natural gas 0.083 mJ/ m² and for forest residues 0.015 mJ/ m². Using a longer time perspective than 300 years will result in lower accumulated radiative forcing from the scenario `Peat wetland with high CO₂-uptake'. This is due to the negative instantaneous forcing that occurs after 200 years for each added generation.?It is important to consider CH₄ emissions from the virgin mire when choosing mires for utilization. Low original methane emissions give significantly higher total climate impact than high original emissions do.?Afforestation on areas previously used for peat extraction should be performed in a way that gives a high forest growth rate, both for the extraction area and the surrounding area. A high forest growth rate gives lower climate impact than a low forest growth rate.?There are great uncertainties related to the data used for emissions and uptake of greenhouse gases in restored wetlands. The mechanisms affecting these emissions and uptake should be studied further.     

Leading and lagging: Process safety climate–incident relationships at one year

In order to evaluate the leading and lagging effects of process safety climate on incidents, we correlated safety climate survey data with organizational safety records from before and after the survey time period. We obtained data from a large, multinational organization with manufacturing operations involving a number of complex processes, chemicals, and hazardous substances. A total of 7728 employees from 62 sites responded to a safety climate survey in 2007. Individual responses were aggregated to the site-level and matched to site-level organizational records of process safety incidents 1 year before and 1 year after survey administration. Employees’ perceptions of good routine housekeeping were significantly related to environmental impact incidents as both a leading and a lagging indicator, as well as fires/explosions and property damage outcomes. Employees’ perceptions of systems to prevent backlogs and the extent to which health and safety problems are promptly corrected were also related to environmental releases and fires/explosions. Implications for process safety climate research, organizational survey strategies, and organizational climate change are discussed.     

The tree species matters: Biodiversity and ecosystem service implications of replacing Scots pine production stands with Norway spruce

Ambio - The choice of tree species used in production forests matters for biodiversity and ecosystem services. In Sweden, damage to young production forests by large browsing herbivores is helping...     

Circumpolar status of Arctic ptarmigan: Population dynamics and trends

Rock ptarmigan (Lagopus muta) and willow ptarmigan (L. lagopus) are Arctic birds with a circumpolar distribution but there is limited knowledge about their status and trends across their circumpolar distribution. Here, we compiled information from 90 ptarmigan study sites from 7 Arctic countries, where almost half of the sites are still monitored. Rock ptarmigan showed an overall negative trend on Iceland and Greenland, while Svalbard and Newfoundland had positive trends, and no significant trends in Alaska. For willow ptarmigan, there was a negative trend in mid-Sweden and eastern Russia, while northern Fennoscandia, North America and Newfoundland had no significant trends. Both species displayed some periods with population cycles (short 3–6 years and long 9–12 years), but cyclicity changed through time for both species. We propose that simple, cost-efficient systematic surveys that capture the main feature of ptarmigan population dynamics can form the basis for citizen science efforts in order to fill knowledge gaps for the many regions that lack systematic ptarmigan monitoring programs.

     

Spatial trends of polyfluorinated compounds in guillemot (Uria aalge) eggs from North-Western Europe

Polyfluorinated alkyl compounds (PFCs) are a group of chemicals of growing concern that have been detected in biological and abiotic samples worldwide. This study reports the concentrations of a suite of PFCs: perfluorooctyl sulfonate (PFOS), perfluorooctyl sulfonamide (PFOSA) and perfluorinated carboxylic acids (PFCAs) in guillemot (Uria aalge) eggs, collected in North-Western Europe, from Iceland, the Faroe Islands, Sweden and two locations in Norway. The highest concentrations of PFOS were found in samples from Sweden (mean 400 ng g(-1) wet weight (w.w.)), which were almost five times higher than concentrations found in Norwegian samples (mean 85 ng g(-1)w.w. from both sample sites). The concentrations found in Icelandic and Faroe samples were lowest (mean 16 and 15 ng g(-1)w.w., respectively). Only Swedish samples differed significantly from the other locations. In general, PFCAs show a different spatial trend than PFOS. Perfluorooctanoic acid (PFOA) was not detected in any sample and perfluorononanoic acid (PFNA) was only detected in samples from Sweden. The most abundant PFCA was perfluoroundecanoic acid (PFUA) with highest concentrations in samples from Sweden (mean 82 ng g(-1)w.w.), samples from the Faroe Islands had the second highest concentration (mean 57 ng g(-1)w.w.) and samples from Iceland and Norway had concentrations ranging between 18 and 30 ng g(-1)w.w. The original hypothesis was based on the idea that PFC concentrations are the highest close to more densely populated and industrialized areas and lower levels in remote areas. However, the geographic pattern is more complicated than predicted and varies among different PFCs.     

Downward Migration of Dense Bottom Currents

The focus of this paper is on the dynamics of a dense current flowing along the continental slope, and the frictionally induced downward motion it experiences. In particular, the movement of the lateral boundaries where the isopycnals meet the bottom are considered. The current is taken to be wide compared to the Rossby radius, which is in accordance with observations and makes the dynamics quasigeostrophic. The time development of the plume thickness is studied, using three different parameterisations for the bottom friction.Independently of the choice of parameterisation, the following results are obtained: In the central part of the plume friction acts as a diffusive process to minimise the curvature of the upper surface of the plume. At the upper edge the plume quickly approaches a state with small slope, i.e. small geostrophic velocity and small frictionally induced downward flow. At the lower edge a tongue of dense water shoots out creating a widening layer. The thickness of the migrating layer is approximately equal to the boundary layer depth and its downward speed is comparable to the along-slope geostrophic velocity. The downslope end of the migrating layer may form a steep front which requires some precautions in the numerical procedure.     

Chlorinated and brominated organic contaminants in fish from Shanghai markets: a case study of human exposure

In the present study were two favorite edible fish species for local residents, i.e., mandarin fish and crawfish, collected from the Shanghai market and analyzed for selected organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), hexabromocyclododecane (HBCDD), polybrominated diphenyl ethers (PBDEs) and methoxylated PBDEs (MeO-PBDEs). Efforts were also made to identify the potential sources of these contaminants. Comparable concentrations of hexachlorocyclohexanes (HCHs), dichlorodiphenyltrichloroethanes (DDTs) and HBCDD were found in muscle tissue of mandarin fish from Guangdong (GDF), the Pearl River Delta and from Taihu Lake (TLF), the Yangtze River Delta. Levels of chlordanes, PCBs and PBDEs were about one magnitude lower in TLF compared to GDF. The concentrations of OCPs in the butter-like gland of the crawfish (CFB) were 2-5 times of those in the crawfish muscle (CFM) while concentrations of PCBs, PBDEs and MeO-PBDEs were comparable. The different patterns and levels of chlorinated and brominated organohalogen contaminants seen in mandarin fish from GDF and TLF indicates that different types of chemicals might be used in the two delta regions. The present study also shows a good correlation between the concentrations of hexachlorobenzene (HCB) and pentachloroanisol (PCA) in fish for the first time. Fish consumption limits based on chemical contaminants with non-carcinogenic effects were calculated. The estimated maximum daily consumption limit for GDF, TLF, CFM and CFB were 1.5, 2.6, 3.7 and 0.08 kg, respectively, indicating no significant risk regarding the persistent organic pollutants measured in the present study.     

Reductive debromination of nonabrominated diphenyl ethers by sodium borohydride and identification of octabrominated diphenyl ether products

A method was developed to study reductive transformation of highly brominated diphenyl ethers (BDEs). The method development is a part of a broader project where it will be used to determine the susceptibility of environmental pollutants to reductive conditions, in an attempt to create a scheme for determination of chemical’s persistence. This paper focuses on identification of octabrominated diphenyl ether transformation products from reductive debromination of the three nonabrominated diphenyl congeners (nonaBDE), BDE-206, -207 and -208. Sodium borohydride was used to explore the reductive debromination of the nonaBDEs. The transformation products were collected at two time-points and identified products were quantified by GC-MS. The reduction of the nonaBDEs lead primarily to debrominated products, mainly octaBDEs. The three nonabrominated DEs gave isomer-related transformation product patterns. BDE-207 and BDE-208 showed a propensity for ortho-debromination in the initial reaction step, while no discrimination between initial debromination positions was seen for BDE-206. All three nonabrominated DEs displayed a preferred initial debromination on the fully brominated DE ring.