排序方式: 共有23条查询结果,搜索用时 15 毫秒
1.
In a laboratory-scale combustion reactor, flue-gas samples were collected at two temperatures in the post-combustion zone, 700 °C and 400 °C, using two different water-cooled sampling probes. The probes were the cooled probe described in the European Standard method EN-1948:1, referred to as the original probe, and a modified probe that contained a salt/ice mixture to assist the cooling, referred to as the sub-zero probe. To determine the efficiency of the cooling probes, internal temperature measurements were recorded at 5 cm intervals inside the probes. Flue-gas samples were analyzed for polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs). Samples collected at 700 °C using the original cooling probe showed higher concentrations of PCDD/Fs compared to samples collected using the sub-zero probe. No significant differences were observed between samples collected at 400 °C. The results indicated that artifact formation of PCDD/Fs readily occurs during flue-gas sampling at high temperatures if the cooling within the probe is insufficient, as found for the original probe at 700 °C. It was also shown that this problem could be alleviated by using probes with an enhanced cooling capacity, such as the sub-zero probe.Although this may not affect samples collected for regulatory purposes in exit gases, it is of great importance for research conducted in the high-temperature region of the post-combustion zone. 相似文献
2.
3.
Removal of dioxins and related aromatic hydrocarbons from flue gas streams by adsorption and catalytic destruction 总被引:4,自引:0,他引:4
The dioxin removing capacity of the shell dedioxin system (SDDS-a Ti/V oxidative type catalyst) has been tested using the Ume? lab-scale incinerator over the temperature range 100-230 degrees C and at space velocities of 8000 and 40,000 h(-1). Other analogous organic compounds, such as PCBs, PAHs, chlorobenzenes and chlorophenols have also been investigated. Results show a high degree of dioxin removal already at 100 degrees C (82%), which occurs mainly by adsorption. When the temperature is raised a transition towards destruction is seen and at 150 degrees C, gas hour space velocity (GHSV) 8000 and at 230 degrees C, GHSV 40,000 virtually all removal is by destruction. High PCDD/F destruction efficiencies are reported (> 99.9%, based on I-TEQ); the other dioxin-related species and PAHs are also removed and destroyed to a significant extent. The SDDS has proved to be an effective means of destroying organic compounds in the gas phase, particularly dioxins, at temperatures as low as 150 degrees C. 相似文献
4.
The emissions from deep-seated fires in domestic waste have been investigated. The gas phase yields of PAH, PCDD/F, PCB, HCB, particles, and metals associated to the particulate matter were analysed during a series of simulated deep-seated fires. The method of extinguishment was varied and in cases where water was used for extinguishment, the runoff water was analysed for PAH, PCDD/F, PCB, hexachlorobenzene, and metals. In total six tests were performed. In four of the tests, samples of the fire residue were analysed for PCDD/F, PCBs, and chlorobenzenes. 相似文献
5.
The formation of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and the three coplanar polychlorinated biphenyls (pPCBs) was studied during labscale fludized bed combustion of eight artificial municipal solid waste (MSW) fuel mixtures. The level of chlorine as well as the chlorine source varies within the different fuel mixtures. Four different chlorine sources were studied, viz, an inorgnaic (NaCl) and three organic sources, pure PVC plastic and two products (floor and cable) and the total chlorine level varies between 0.28% and 1.1%. The experiments were performed in a 5 kW laboratory scale fluidized bed reactor. A correlation between the total chlorine in the fuel and the formation of the hepta- and octa-chlorinated PCDD/F homologues was found. However, the most important variable for changes in the PCDDs/Fs and pPCBs formation was disturbance in the combustion condition and not the variation in chlorine content of the fuel. Furthermore, no differences in formation between the chlorine sources could be seen. 相似文献
6.
The polychlorinated dibenzo-p-dioxin (PCDD) and polychlorinated dibenzofuran (PCDF) content of three fly ash samples with different elemental compositions from different municipal waste incinerators were analyzed before and after thermal treatment at 300 °C or 500 °C. Gas phase emissions during the treatments were also collected and analyzed. Substantial reductions in the total PCCD/F content of the ashes were observed after treatment at 500 °C, seemingly due to degradation rather than dechlorination. Treatment at 300 °C resulted in an increase in the PCDD/F content of the three ashes. Initial concentration of PCDD/F in the untreated ashes did not reflect the outcome of the treatment at the different temperatures. In addition, the composition of the ash was found to influence the rate of decomposition and formation of PCDD and PCDF during thermal treatment; the results showed that Cu, Fe, Ca and S play important roles in these processes. 相似文献
7.
8.
Broz J Grabic R Kilián J Lojkásek M Marklund S Ocelka T Pekárek V Pribyl J Tydlitát V Výska J 《Chemosphere》2000,41(12):1948-1911
The effect of synthetic and mineral oils on the formation of polyaromatic hydrocarbons (PAHs), polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and biphenyls (PCBs) in emissions from a spark ignition engine was studied on a Skoda Favorit engine fueled with leaded gasoline. The test cycle simulated urban traffic conditions on a chassis dynamometer, in accordance with the ECC 83.00 test. The data for selected PAHs as well as PCDDs, PCDFs, and PCBs congener profiles are presented. PCDD/Fs emissions for an unused oil and the oil after 10000-km operation varied from 300 to 2000 fmol/m3, PCBs emissions from 75 to 178 pmol/m3, and PAHs emissions from 150 to 420 microg/m3. The content of PCBs in oils varied from 2 to 920 mg/kg. 相似文献
9.
Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in stack emission exist both as vapor and sorbed onto the surface of particles. The partition between the two phases is of a dynamic nature and changes rapidly with temperature. When monitoring stack emissions, a sampling method must be used that efficiently collects both phases as well as any condensation aerosol formed in the sampling train. In this study, the two sampling methods used in Sweden, the cooled probe polyurethane foam plug (PUFP) sampling train and the sampling train recommended by the Swedish Environmental Protection Board has been tested for particle collection ability. The results show that an aerosol filter has to be introduced after the condensor in order to collect particle bound PCDDs and PCDFs efficiently. 相似文献
10.
Christoffer Rappe Lars-Owe Kjeller Stellan Marklund Martin Nygren 《Chemosphere》1986,15(9-12):1291-1295