Hydroxylated PCB metabolites in nonhatched fulmar eggs from the Faroe Islands

Thirty-six polychlorinated biphenylols (OH-PCBs) congeners were characterized in Fulmar (Fulmarus glacialis) eggs collected from the Faroe Islands. The seven most abundant congeners were quantified in 19 samples, and the sigmaOH-PCB concentrations ranged between 0.92 and 4.0 ng g(-1) fresh weight (f.w.). These eggs constitute a part of the traditional diet for at least a part of the population on the Faroe Islands and may contribute to the high levels of these contaminants found in the blood of pregnant Faroese women. Because the metabolites are present in the nonhatched fulmar egg, it is concluded that the OH-PCBs are transferred to the egg before laying. High levels, 3300-18,000 ng g(-1) l.w., of sigmapolychlorinated biphenyls (PCB) were determined in the fulmar eggs, which are a considerable source for human exposure. The high PCB levels are a source for metabolic formation of hydroxylated PCBs.     

Phenolic compounds in oat grains (Avena sativa L.) grown in conventional and organic systems

The concentrations of avenanthramides (AVAs), hydroxycinnamic acids (HCAs), a sucrose-linked truxinic acid (TASE), and certain agronomic parameters were analyzed in organically and conventionally grown oats. Three cultivars of oats (i.e. Freja, Sang, and Matilda) were grown according to standards for both conventional and organic farming in Sweden, from 1998 to 2000. Two levels of nitrogen (N) and three replicates were included. Overall, there were significant differences between years, cultivars, and N rate for AVA concentration in the grains, but there were no differences in concentration as a consequence of the conventional or organic cropping system used. The AVA content was higher in the samples grown in 2000, particularly in the cultivar Matilda, and was negatively affected by higher N rates. The HCAs showed cultivar and year differences, but were not influenced by N rates or the cropping system. The HCA content was highest in Matilda, and was significantly lower in samples grown in 1999. The concentration of TASE differed only between years, and was about 100% higher in samples from 1999, compared with samples from 1998 and 2000. The AVA and HCA concentrations were negatively correlated to the yield and specific weight of the grains and positively correlated to the protein content. Conversely, the concentration of TASE was positively correlated to the yield. The specific parameters responsible for the variation in the phenolic compounds are not known, but it seems that factors affecting the yield and/or the specific weight also affect the concentrations of AVAs, HCAs, and TASE in oat grains.     

Levels of polychlorinated biphenyls and organochlorine pesticides in serum samples of Egyptian Vulture (Neophron percnopterus) from Spain

Concentrations of 23 polychlorinated biphenyls (PCBs), p,p'-DDT and two of its metabolites, p,p'-DDE and p,p'-TDE have been measured in serum samples of up to 1 ml of Egyptian Vulture (Neophron percnopterus) gathered from five populations in Spain. SigmaPCB concentrations were found to be in the range 3.2-97 ng/ml, while those of SigmaDDTs ranged from 0.93 to 38 ng/ml. p,p'-DDT/p,p'-DDE ratios higher than one were only found in the Segovia population, which could be an indication of recent use of p,p'-DDT in the area. In all cases, PCB profiles were dominated by congeners 52, 132 + 105, 138, 153 and 180. However, some differences among the five populations studied became evident when their profiles were compared with those of technical PCB mixtures by principal components analysis. The DDT and PCB levels detected in the serums analysed were lower than those previously reported for similar avian species and those reported to have deleterious effects on survival or reproduction of birds.     

Roadside particle number distributions and relationships between number concentrations, meteorology, and traffic along a northern California freeway

Particle number distributions were measured simultaneously upwind and downwind of a suburban-agricultural freeway to determine relationships with traffic and meteorological parameters. Average traffic volumes were 6330 vehicles/hr with 10% heavy-duty vehicles, and volumes were higher in July than November. Most downwind particle number distributions were bimodal, with a primary mode at approximately 10-25 nm, indicating that newly formed particles were sampled. Total downwind 6-237 nm particle number concentrations (Ntot) ranged from 9.3 x 10(3) to 2.5 x 10(5) cm(-3), with higher daily average concentrations in November compared with July. Ntot correlated with wind speed, temperature, and relative humidity. Upwind photochemically initiated nucleation likely led to elevated background nanoparticle concentrations in July, as evidenced by increasing upwind distribution modal diameter with increasing temperature and a strong correlation between upwind Ntot and solar radiation. Also in summer, Ntot showed stronger correlation with heavy-duty vehicle volumes than wind speed, temperature, and relative humidity. These results indicate the importance of measuring background particle size distributions simultaneously with roadside distributions. There may be a minimum vehicle volume from which useful real-world vehicle particle number distributions can be measured at roadside, even when collecting samples within 10 m of the traveled lanes.     

Prediction of ozone concentration in ambient air using multivariate methods

Multivariate statistical methods including pattern recognition (Principal Component Analysis--PCA) and modeling (Multiple Linear Regression--MLR, Partial Least Squares--PLS, as well as Principal Component Regression--PCR) methods were carried out to evaluate the state of ambient air in Miskolc (second largest city in Hungary). Samples were taken from near the ground at a place with an extremely heavy traffic. Although PCA is not able to determine the significance of variables, it can uncover their similarities and classify the cases. PCA revealed that it is worth to separate day and night data because different factors influence the ozone concentrations during all day. Ozone concentration was modeled by MLR and PCR with the same efficiency if the conditions of meteorological parameters were not changed (i.e. morning and afternoon). Without night data, PCR and PLS suggest that the main process is not a photochemical but a chemical one.     

A combination of ion exchange and electrochemical reduction for nitrate removal from drinking water. Part I: nitrate removal using a selective anion exchanger in the bicarbonate form with reuse of the regenerant solution.

The process of selective nitrate removal from drinking water by means of ion exchange was studied. A commercial strong base anion exchanger with triethylammonium (-N+Et3) functional groups was used in the bicarbonate (HCO3-) and carbonate (CO3(2-)) form. The aim of this study was to optimize ion-exchanger regeneration in view of the subsequent electrochemical reduction of nitrates in the spent regenerant solution. The effects of ion-exchanger form, concentration of regenerant solution, and presence of nitrates, chlorides, and sulphates in the regenerant solution were studied. The strong base anion exchanger in HCO3- form that was investigated was able to treat 270 bed volumes of model water solution containing 124 mg dm(-3) nitrates. To achieve adequate regeneration of the saturated anion exchanger, it is necessary to use approximately 30 bed volumes of fresh 1-M sodium bicarbonate (NaHCO3) regenerant solution. The presence of residual 50-mg dm(-3) nitrates in the regenerant solution, treated by electrolysis, resulted in an increase in the dose of regenerant solution to 35 bed volumes and a decrease in the subsequent sorption run of approximately 13%. The volume of applied regenerant solution was high, but the consumption of NaHCO3 for regeneration was low.     

Dehalogenation Potential of Municipal Waste Incineration Fly Ash

BACKGROUND, AIMS AND SCOPE: In the first part of this paper the main principles which control the dehalogenation of polychlorinated aromatic compounds on municipal waste incineration fly ash (MWI-FA) have been discussed and the model fly ash of similar dehalogenation activity has been proposed. Even if both systems show comparable dehalogenation properties, the main question concerning the postulated identical reaction mechanism in both cases is left unanswered. The other very important point is to what extent is this dechlorination mechanism thermodynamically controlled. The same problem is often discussed in the literature also for the de novo synthetic reactions. From the data it is clear that metallic copper plays a decisive role in the mechanism of the dehalogenation reaction. Although the results reported in the first part strongly support the idea that copper acts in this dechlorination as the reaction component, in contrast to its generally accepted catalytic behaviour, we believed that additional support for this conclusion can be obtained with the help of a thermodynamic interpretation of the mechanism of the reaction. RESULTS AND DISCUSSION: The pathways of hexachlorobenzene dechlorination on MWI-FA and model fly ash were studied in a closed system at 260-300 degrees C under nitrogen atmosphere. These pathways were the same for both systems, with the following prevailing sequences: hexachlorobenzene --> pentachlorobenzene --> 1,2,3,5-tetrachlorobenzene --> 1,3,5-trichlorobenzene --> 1,3-dichlorobenzene. Thermodynamic calculations were carried out by using the method of minimization total Gibbs energy of the whole system. In the calculations, the following reaction components were taken into account: all gaseous chlorinated benzenes, benzene, hydrogen chloride, a gaseous trimer Cu3Cl3, and also Cu2O and CuCl2 as solid components. The effect of the reaction temperature and the amount of copper and water vapour were considered as well. The effect of reaction temperature was determined from the data calculated for the 500 to 750 K temperature region. The effect of the initial composition was determined for the molar amounts of copper = 0.01-3 moles and water vapour = 0.2 to 3 moles per mole of chlorobenzene isomer CONCLUSIONS: The results of hexachlorobenzene dechlorination by MWI-FA and model fly ash under comparable reaction conditions allow us to conclude that both dechlorinations proceed via the same dechlorination pathways, which can be taken as an evidence of the identical dehalogenation mechanism for both systems. The relative percentual distribution of the dehalogenated products depends on the temperature, but not on the initial amount of water vapour or copper metal. On the other hand, the initial amount of copper substantially affects the conversion of the dehalogenation as well as the molar ratio of Cu3Cl3 to HCl in the equilibrium mixture. Comparison of the experimental with thermodynamic results supports the idea that dehalogenation reactions are thermodynamically controlled. RECOMMENDATIONS AND OUTLOOK: Thermodynamic analysis of the dehalogenation reactions may prove useful for a wide range of pollutants. The calculations concerning polychlorinated biphenyls and phenols are under study.     

A microcosm approach to assessing the effects of earthworm inoculation and oat cover cropping on CO2 fluxes and biological properties in an amended semiarid soil

We designed a microcosm experiment to assess the influence of inoculation with Eisenia foetida earthworms and the establishment of an Avena sativa cover crop on biological (enzyme activities and labile carbon fractions) soil quality indicators in a soil treated with a composted organic residue, and to determine the contribution of these treatments to carbon dioxide emissions from the soil to the atmosphere of the microcosm. The microcosms were incubated for 53 days under 28 °C/18 °C day/night temperatures. The addition of earthworms and the planting of A. sativa increased dehydrogenase activity of compost amended soil by about 44% after 23 days of incubation. The metabolic potential, calculated as the ratio dehydrogenase activity/water soluble C, was higher in the compost amended soil planted with A. sativa. The highest total amount of CO₂–C evolved occurred in the soil treated with composted residue and earthworms (about 40% of the total amount of CO₂ evolved came from earthworm activity). The planting of A. sativa increased the decomposition rate constant of organic matter in the amended soil but decreased the potentially mineralizable C pool. In conclusion, the establishment of an A. sativa cover crop and the addition of E. foetida to a degraded agricultural soil treated with composted residue were effective treatments for improving the biological and biochemical quality and the metabolic potential of the soil.     

Efficient use of Fe metal as an electron transfer agent in a heterogeneous Fenton system based on Fe0/Fe3O4 composites

In this work a novel heterogeneous Fenton system based on Fe(0)/Fe3O4 composites is described. The composites with several Fe(0)/Fe3O4 ratios were prepared by two different methods, i.e. mechanical alloying of Fe(0) and Fe3O4 powders and controlled reduction of Fe3O4 with H2. Reaction studies and detailed Conversion Electron M?ssbauer surface characterization of the composites Fe(0)/Fe3O4, Fe(0), Fe3O4, alpha-Fe2O3 and gamma-Fe2O3 suggested that Fe2+surf species are essential to produce an active Fenton system. Kinetic studies for the oxidation of the dye methylene blue, used as an organic model molecule, and for the peroxide decomposition suggest that the reactions proceed via HO* radicals generated from Fe2+surf species and H2O2 in a Fenton like mechanism. The increase in activity caused by the addition of Fe(0) is discussed in terms of a creation of Fe2+surf species during the preparation of the composite and by an electron transfer mechanism from Fe(0) to Fe3+surf during the Fenton reaction to regenerate the Fe2+surf active species.     

The economic benefits of fulfilling the World Health Organization’s limits for particulates: A case study in Algeciras Bay (Spain)

Algeciras Bay is an important industrial and port zone in the south of Spain whose pollution by particulate matter surpasses the threshold levels recommended by the World Health Organization (WHO) in its 2005 Guide on Air Quality. This study analyses the mortality avoided and the economic benefit which would be derived from a reduction of the pollution of PM2.5 and PM10 to the levels recommended by the WHO in Algeciras Bay in the period 2005-2015. The analysis carried out shows that the industrial zones, such as Los Barrios and San Roque, are those which have greater levels of pollution and in which the relative risk is greater. The calculations for Algeciras Bay between 2000 and 2015 show 182 deaths which would be avoided if the particulate matter pollution were reduced to the levels recommended by the WHO. Likewise, the economic valuation which this impact has on health is carried out through two concepts: the cost of illness and the Value of Statistical Life (VSL). The result shows that the economic benefit that would come out with the cost of illness valuation is 5,329,110€ and from the VSL is 414,787,113€.

Implications: PM_2.5 has a greater concentration in industrial localities and is linked to the industrial activity. When the particulate matter pollution is reduced to the levels recommended by the WHO in an industrialised area such as Algeciras (Spain), 182 deaths which would be avoided. The result shows that the economic benefit that would come out with the cost of illness valuation is 5,329,110€ and from the value of statistical life is 414,787,113€.