Pharmaceutical management through environmental product labeling in Sweden

There is an increased awareness that medicinal products for human use may cause negative effects in the environment. In Sweden a voluntary environmental classification system for drugs has been established in collaboration between producers, authorities and the public health care, and used for five years. The idea is to enhance the market demand for medicines with less environmental impact, which in turn will stimulate the producers to design future medicines to be more environmentally friendly. The system is open to the public and based on assessment of the active ingredient in the medicinal product into several classes of risk and hazard, respectively. It is closely related to the EMEA guidelines. Risk is expressed as the ratio between the predicted environmental concentration (PEC) of the active ingredient (AI) and its predicted no effect concentration (PNEC). The hazard is expressed in terms of the AI's persistence, potential to bioaccumulation, and eco-toxicity. Drug data for the classification are delivered by the respective producers.Hitherto more than 300 AI, representing more than 50% of the Swedish volume of drug use, have been classified. Data for risk assessment were missing in 47% of AI. Among drugs with data 7% had a PEC/PNEC ratio > 1, and another 7% had a ratio between 0.1 and 1. The AIs with highest ratio (> 10) were two estrogens. Data for hazard assessment were lacking in 16% of the AI. Among drugs with environmental data 92% were not ready biodegradable, 23% had potential to bioaccumulation, and 61% were toxic to aquatic organisms at a concentration below 1 mg/l. These data are utilized by regional pharmaceutical expert groups when selecting substances to be recommended in public health care in Sweden. They may also be used by prescribing doctors who want to identify the environmentally most favourable substance among several with equivalent medical effect.We conclude that environmental data on human medicinal products are often missing, or reveal unfavourable environmental properties. A proper judgement of the environmental impact of an AI requires a joint evaluation of its risk and hazard. We suggest that the pharmaceutical producers should highlight environmental precaution when designing new AIs, and that the environmental data should be transparent to the general public.     

Mobility and Methylation of Mercury in Forest Soils Development of an In-Situ Stable Isotope Tracer Technique and Initial Results

A method for investigating in-situmethylation and mobility of mercury has beendeveloped and applied to forest soil. The methodis based on additions of stable ¹⁹⁹Hgisotopes to forest soil plots followed bysampling and analysis of isotope ratios of totalmercury and MeHg using ICP-MS. Initial resultsindicate that a fraction (30%) of the mercuryadded to the forest soils is immobilised over atime scale of 16 months. A small but significantfraction of the mercury is methylated during thesame time scale. Higher methylation rates werefound in wetland soil than in dry forest podzolsoil.     

Examining Source-Receptor Relationships for Mercury in Scandinavia Modelled and Empirical Evidence

The atmosphere remains the major source of mercuryin Swedish ecosystems. Since the late eighties,atmospheric emissions of mercury have drasticallydecreased in Europe. Wet deposition of mercury hasdecreased over the last decade but still exhibitsa clear south-to-north gradient, greatlyinfluenced by source areas in northern and centralEurope. The decreases in emissions can beattributed to both direct measures to close knownpoint sources and a declining economy and energyconsumption in many East European countries.Further reductions of mercury emissions willrequire that other source categories such asindirect emissions from mercury-containingproducts and crematories are be considered.     

Improved methodology to assess modification and completion of landfill gas management in the aftercare period

Municipal solid waste landfills represent the dominant option for waste disposal in many parts of the world. While some countries have greatly reduced their reliance on landfills, there remain thousands of landfills that require aftercare. The development of cost-effective strategies for landfill aftercare is in society’s interest to protect human health and the environment and to prevent the emergence of landfills with exhausted aftercare funding. The Evaluation of Post-Closure Care (EPCC) methodology is a performance-based approach in which landfill performance is assessed in four modules including leachate, gas, groundwater, and final cover. In the methodology, the objective is to evaluate landfill performance to determine when aftercare monitoring and maintenance can be reduced or possibly eliminated. This study presents an improved gas module for the methodology. While the original version of the module focused narrowly on regulatory requirements for control of methane migration, the improved gas module also considers best available control technology for landfill gas in terms of greenhouse gas emissions, air quality, and emissions of odoriferous compounds. The improved module emphasizes the reduction or elimination of fugitive methane by considering the methane oxidation capacity of the cover system. The module also allows for the installation of biologically active covers or other features designed to enhance methane oxidation. A methane emissions model, CALMIM, was used to assist with an assessment of the methane oxidation capacity of landfill covers.     

Ah Receptor Agonists in UV-exposed Toluene Solutions of Decabromodiphenyl Ether (decaBDE) and in Soils Contaminated with Polybrominated Diphenyl Ethers (PBDEs) (9 pp)

Goal, Scope and Background The use of polybrominated diphenyl ethers (PBDEs) as flame retardants increases the risk for emissions of other brominated compounds, such as polybrominated dibenzodioxins (PBDDs) and dibenzofurans (PBDFs). The large homology in structure of PBDD/Fs and mechanism of toxic action, i.e. the capacity to activate the Ah receptor (AhR) pathway, compared to their well-studied chlorinated analogues, justifies a raised concern to study the environmental levels and fate of these compounds. Decabromodiphenyl ether (decaBDE) is the most widely used PBDE today. Studies on photolytic debromination of decaBDE in organic solvents have shown debromination of decaBDE, as well as formation of PBDFs. However, little is known about the transformation mechanisms and there are only scarce data on photoproducts and PBDE transformation in environmentally relevant matrices. In this study, mechanism-specific dioxin bioassays were used to study photolytic formation of AhR agonists in toluene solutions of decaBDE. In addition, the influence of irradiation time and UV-light wavelength on the formation was studied. PBDE congener patterns and presence of PBDD/Fs were analysed. Further, AhR agonists were analysed in agricultural soils contaminated with PBDEs. Soils were also exposed to UV-light to study changes in AhR agonist levels. Methods Toluene solutions of decaBDE were irradiated using three different spectra of UV-light, simulating UV-A (320-400 nm), UV-AB (280-400 nm), and UV-ABC (250-400 nm). Additionally, decaBDE solutions were exposed to narrow wavelength intervals (10 nm bandwidth) with the central wavelengths 280, 290, 300, 310, 320, 330, 340, 350, 360 nm. AhR agonists in decaBDE solutions were analysed with two different bioassays, the chick embryo liver-cell assay for dioxins (Celcad) and the dioxin responsive, chemically activated luciferase expression assay (DR-Calux). Also, the decaBDE solutions were analysed with LRGC-LRMS to obtain PBDE congener patterns for breakdown of decaBDE, and with HRGC-HRMS, for presence of PBDD/Fs. Four soils were exposed to UV-AB light, under both dry and moist conditions. Levels of AhR agonists in soil extract fractions, before and after UV-exposure, were analysed with the DR-Calux. Results and Discussion Significant levels of photoproducts able to activate the AhR pathway, up to 31 ng bio-TEQ/ml, were formed in UV-exposed decaBDE solutions. The transformation yield of decaBDE into AhR agonists was estimated to be at the 0.1%-level, on a molar basis. The net formation was highly dependent on wavelength, with the sample irradiated at 330 nm showing the highest level of dioxin-like activity. No activity was detected in controls. PBDE analysis confirmed decaBDE degradation and a clear time-dependent pattern for debromination of PBDE congeners. AhR agonist effect in the recalcitrant fractions of the soils corresponded to the levels of chemically derived TEQs, based only on chlorinated dioxin-like compounds in an earlier study. It was concluded that no significant levels of other AhR agonists, e.g. PBDFs, were accumulated in the soil. UV-light caused changes in AhR-mediated activity in the more polar and less persistent fractions of the soils, but it is not known which compounds are responsible for this. Recommendations and Perspective . The laboratory experiments in this study show that high levels of AhR agonists can be formed as photoproducts of decaBDE and it is important to elucidate if and under which conditions this might occur in nature. However, soil analysis indicates that photoproducts of PBDE do not contribute to the accumulated levels of persistent dioxin-like compounds in agricultural soil. Still, more data is needed to fully estimate the environmental importance of PBDE photolysis and occurrence of its photoproducts in other environmental compartments. Analysis with dioxin bioassays enabled us to gather information about photoproducts formed from decaBDE even though the exact identities of these compounds were not known. Conclusion Bioassays are valuable for studying environmental transformation processes like this, where chemical analysis and subsequent toxicological evaluation requires available standard compounds and information on toxicological potency. The use of bioassays allows a rapid evaluation of toxicological relevance.     

Testing the navigational abilities of ocean migrants: displacement experiments on green sea turtles (Chelonia mydas)

Like many animals migrating through the oceans, sea turtles face difficult navigational tasks when they have to reach distant, specific sites. The paradigmatic case of Brazilian green turtles (Chelonia mydas), which nest on the tiny Ascension Island in the middle of the Atlantic Ocean, has often been the subject of hypotheses concerning their navigational mechanisms. To investigate their nature, we displaced 18 females from Ascension and tracked them by satellite after release from eight different points in the ocean, 60-450 km away from the island. Four turtles moved to Brazil soon after the release, 4 moved in various directions before heading to Brazil, and 10 reached the island. All the successful trips, bar 1, were winding but ended with a final straight segment of variable length, as if the turtles were searching for a sensory contact with the island which they obtained at various distances. The approach to Ascension mostly occurred from the direction opposite to the trade wind, suggesting a navigational role of wind-borne information originating from the island.     

宜宾夜鹭卵中有机氯农药及其代谢物的赋存特征

于2017年在四川省宜宾市采集黑冠夜鹭(Nycticorax nycticorax)卵样30枚(包括9枚无胚卵和21枚胚胎卵),分析了样品中有机氯农药(OCPs)的残留状况.结果表明,宜宾夜鹭卵中检出了8种OCPs残留物,总含量为4.76～97.9 ng·g~(-1)(以湿重计).其中,p,p′-滴滴伊(p,p′-DDE)含量最高((20±18) ng·g~(-1)),其次为六氯苯(HCB,(5.3±3.4) ng·g~(-1))和β-六六六(β-HCH,(1.1±0.8) ng·g~(-1));滴滴涕类(∑DDTs)中的稳定代谢物p,p′-DDE和六六六类(∑HCHs)中的稳定同分异构体β-HCH占比均在99%以上.p,p′-滴滴涕(p,p′-DDT)和p,p′-DDE在无胚卵蛋液中的残留水平比在胚胎卵蛋液中更高一些,而反式九氯则相反,其余OCPs无差别,这说明鹭卵在孵化过程中p,p′-DDT可能易于代谢,而稳定的p,p′-DDE更容易向胚胎传递.宜宾夜鹭卵中p,p′-DDE的最高含量为84 ng·g~(-1),远低于鹭科繁殖效应阈值(1000 ng·g~(-1)).总体上,夜鹭卵中OCPs的赋存状况较好地反映出长江上游地区OCPs污染水平较低,对夜鹭繁殖的影响较小.