Hydrochemical characteristics of mine waters from abandoned mining sites in Serbia and their impact on surface water quality

Upon completion of exploration and extraction of mineral resources, many mining sites have been abandoned without previously putting environmental protection measures in place. As a consequence, mine waters originating from such sites are discharged freely into surface water. Regional scale analyses were conducted to determine the hydrochemical characteristics of mine waters from abandoned sites featuring metal (Cu, Pb–Zn, Au, Fe, Sb, Mo, Bi, Hg) deposits, non-metallic minerals (coal, Mg, F, B) and uranium. The study included 80 mine water samples from 59 abandoned mining sites. Their cation composition was dominated by Ca²⁺, while the most common anions were found to be SO₄ ^2? and HCO₃ ^?. Strong correlations were established between the pH level and metal (Fe, Mn, Zn, Cu) concentrations in the mine waters. Hierarchical cluster analysis was applied to parameters generally indicative of pollution, such as pH, TDS, SO₄ ^2?, Fe total, and As total. Following this approach, mine water samples were grouped into three main clusters and six subclusters, depending on their potential environmental impact. Principal component analysis was used to group together variables that share the same variance. The extracted principal components indicated that sulfide oxidation and weathering of silicate and carbonate rocks were the primary processes, while pH buffering, adsorption and ion exchange were secondary drivers of the chemical composition of the analyzed mine waters. Surface waters, which received the mine waters, were examined. Analysis showed increases of sulfate and metal concentrations and general degradation of surface water quality.     

Enzyme activity and microorganisms diversity in soil contaminated with the Boreal 58 WG herbicide

Next-generation herbicides are relatively safe when used properly, but the recommended rates are relatively low, which can lead to overdosing. This study evaluated the responses of soil-dwelling microorganisms and soil enzymes to contamination with the Boreal 58 WG herbicide. The analyzed product contains active ingredients flufenacet and isoxaflutole. All tests were performed under laboratory conditions. The analyzed material was sandy clay. Boreal 58 WG was introduced to soil in four doses. Soil without the addition of the herbicide served as the control. The soil was mixed with the tested herbicide, and its moisture content was maintained at 50% of capillary water capacity. Biochemical and microbiological analyses were performed on experimental days 0, 20, 40, 80 and 160. Accidental contamination of soil with the Boreal 58 WG herbicide led to a relatively minor imbalance in the soil microbiological and biochemical profile. The herbicide dose influenced dehydrogenase activity in only 0.84%, urease activity in 2.04%, β-glucosidase activity in 8.26%, catalase activity in 12.40%, arylsulfatase activity in 12.54%, acid phosphatase activity in 42.11%, numbers of organotrophic bacteria in 18.29%, actinomyces counts in 1.31% and fungi counts in 6.86%.     

Effect of topography on sulfate redistribution in cumulonimbus cloud development

An aqueous chemical module is created and included into a complex three-dimensional atmospheric cloud-resolving mesoscale model. In the chemical module, oxidation of S(IV) by ozone and hydrogen peroxide in cloud-water and rainwater, as important process of the sulfate production is included. To examine the impact of topography on the sulfate redistribution in a clean and a polluted environment, the complex topography of Serbia is included in the model. Numerical simulations of an isolated summer Cumulonimbus cloud shows that thunderstorms generate very strong vertical sulfate redistribution from the planetary boundary layer to the upper troposphere. This redistribution is sensitive to cloud dynamics, while cloud microphysics and precipitation determine wet removal of the chemical species. In simulations with realistic topography, the chemical species are transported over larger distances close to the surface, while in the upper atmosphere, there is no difference compared to the simulations without topography. The sensitivity tests of cloud chemistry to the physical processes are made. Omission of nucleation and impact scavenging of aerosols in the model simulations shows that 75.8 and 62.5 % of total sulfur mass deposited in the base experiment for the clean and the polluted environment, respectively, is the result of other processes. Exclusion of oxidation accounted for 19.2 and 37.7 % of total sulfur deposited for clean and polluted environment. Ignoring the ice phase almost not change mass of deposited sulfur: there is an increase of 2.9 and 1.5 % for clean and polluted atmosphere, respectively. Real topography conditions affect the sulfate redistribution in the sense of greater possibilities of transport. Numerical simulations without real topography give an artificial increase of deposited sulfur mass of about 25?30 %.     

Alteration of cholinesterase activity as possible mechanism of silver nanoparticle toxicity

Due to their broad-spectrum antimicrobial activity, silver nanoparticles (AgNPs) have been used in a large number of commercial and medical products. Such proliferated AgNP production poses toxicological and environmental issues which need to be addressed. The present study aimed to investigate the effects of AgNPs on acetylcholinesterase (AChE) and butyrylcholinesterase (BChE), important enzymes in areas of neurobiology, toxicology and pharmacology. Three different AgNPs, prepared by the chemical reduction using trisodium citrate, hydroxylamine hydrochloride (Cl-AgNPs), and borohydride following stabilization with poly(vinyl alcohol), were purified and characterised with respect to their sizes, shapes and optical properties. Their inhibition potential on AChE and BChE was evaluated in vitro using an enzyme assay with o-nitrophenyl acetate or o-nitrophenyl butyrate as substrates, respectively. All three studied AgNPs were reversible inhibitors of ChEs. Among tested nanoparticles, Cl-AgNP was found to be the most potent inhibitor of both AChE and BChE. Although the detailed mechanism by which the AgNPs inhibit esterase activities remains unknown, structural perturbation of the enzyme may be the common mode of ChE inhibition by AgNPs.     

Monitoring of DNA damage in haemocytes of freshwater mussel Sinanodonta woodiana sampled from the Velika Morava River in Serbia with the comet assay

This study was undertaken to investigate the potential of the freshwater mussel Sinanodonta woodiana for detection of genotoxic pollution of the environment. Study was performed at two sites in the Velika Morava River, from May 2010 to February 2011. The alkaline comet assay on haemocytes was used, and the olive tail moment (OTM) was chosen as a measure of DNA damage. The specimens held on acclimation under controlled laboratory conditions for 10 d were used as a control. Chemical analysis revealed the presence of phosphates and increased concentrations of zinc, copper and nickel at both sites during the entire sampling period. The values of OTM in mussels collected from the environment, significantly correlated with the concentration of zinc (r = 0.6248), temperature (r = 0.7006) and dissolved oxygen (r = 0.7738). Seasonal variations in genotoxic response were observed, with the highest OTM values obtained during summer months. Preliminary results of the in vitro study indicated the effect of water temperature on genotoxic response to zinc and cadmium in S. woodiana suggesting that the presence of genotoxic pollutants during months with lower temperature could be under-estimated. Obtained results indicate that S. woodiana could be a valuable tool for active biomonitoring of aquatic environments and emphasizes the importance of seasonal genotoxic monitoring with this organism.     

Evaluating Spatio-temporal Complexities of Forest Management: An Integrated Agent-based Modeling and GIS Approach

The objective of this study is to integrate agent-based modeling and geographic information systems (GIS) for examining how interactions within forest management lead to patterns of land-cover change. Specifically, this study evaluates how management agents behave in the presence of variable timber prices, harvesting costs, and accessibility to timber and how their actions influence the spatial characteristics of the forest landscape over time. The GIS calculates the average harvested patch size, number of patches, and total harvested area as measures of emergent patterns resulting from agent actions. The results from the agent-based GIS model reveal that good economic conditions lead to few but large harvested patches, while deteriorating conditions will see more patches of smaller size if forest companies have access to high-quality timber. This study emphasizes the need for a complex systems approach to forest management as the model illustrates how system elements interact in a manner to produce emergent spatial patterns over time.     

Optimizing the SO2 total emission control strategy: case study—Bor (Serbia)

Mumbai, a megacity of India, and its adjacent marine environment, though heavily stressed from various anthropogenic interferences, harbor ~146 km² of mangrove cover. Manori creek, in the close vicinity of Mumbai, sustains relatively better mangrove formations. A creek habitat had been evaluated for its biological and environmental characteristics, and is compared with similar but relatively lesser stressed Mandovi estuary (~475 km south of Mumbai). Several evidences of deteriorating environment of Manori creek have been described with respect to Water quality index and various biotic community structures. Water quality index of <55 indicated unacceptable aquatic conditions of Manori creek. Dominance of Avicennia marina and poor abundance and diversity of mangrove and associated biological features indicate highly stressed environment. Dominance of stress-tolerant phytoplankton spp. such as Skeletonema costatum and benthic fauna such as Polychaeta further supported the view. The data presented in the present document would help in developing rational approach towards conservation, protection, and sustainable development of mangrove-dominated creek and estuarine wetlands.     

Biomonitoring of heavy metals in fish from the Danube River

The Croatian part of the Danube River extends over 188 km and comprises 58 % of the country’s overall area used for commercial freshwater fishing. To date, the heavy metal contamination of fish in the Croatian part of the Danube has not been studied. The main purpose of this study was to determine heavy metal levels in muscle tissue of sampled fish species and to analyze the measured values according to feeding habits of particular groups. Lead ranged from 0.015 μg^?1 dry weight in planktivorous to 0.039 μg^?1 dry weight in herbivorous fish, cadmium from 0.013 μg^?1 dry weight in herbivorous to 0.018 μg^?1 dry weight in piscivorous fish, mercury from 0.191 μg^?1 dry weight in omnivorous to 0.441 μg^?1 dry weight in planktivorous fish and arsenic from 0.018 μg^?1 dry weight in planktivorous to 0.039 μg^?1 dry weight in omnivorous fish. Among the analyzed metals in muscle tissue of sampled fish, only mercury exceeded the maximal level (0.5 mg kg^?1) permitted according to the national and EU regulations determining maximum levels for certain contaminants in foodstuffs, indicating a hazard for consumers of fish from the Danube River.     

The Adsorption of Formaldehyde on Suspended Particles investigated on model systems

Our laboratory investigation aimed at assessing to what extent suspended particles could adsorb formaldehyde, allowing it, when inhaled, to penetrate deeper into the lung. We used two types of pure soot, N-220 and N-660 (the former being a highly active oil furnace soot with smaller particles and a larger surface area than the latter), because of their chemical inactivity and the adsorptive properties. The results obtained in experimental conditions showed that soot particles could bind 2.3 to 50.2% of formaldehyde, depending on the particle size, relative humidity, amount of particles and the duration of the contact. The recovery of formaldehyde from the particles was also tested. Further investigation is planned under realistic conditions.