The Quality of Water Resources in Dalmatia

The purpose of this study was to monitor and record the specific characteristics and properties of most of the important water resources in Dalmatia located in Southern Croatia for a period of 5 years (1998–2002) according to established standards for drinking water. The paper presents a detailed account of their chemical content, the classification and the concentration of salts. The bacteriological pollution levels are indicated by the total coliform bacterial levels (MPN coli/100 mL). The water characteristics are expressed by coefficients, which represent the ratios between water ingredients. The Ca/Mg eq ratio, SO₄/Cl eq ratio and K₁, K₂ for bicarbonate hardness were calculated. The hygienic characteristics of the water samples were expressed by the total coliform bacteria estimation (MPN coli/100 mL), the permanganate consumption (KMnO₄) and biological oxygen demand (BOD₅). Karst waters in Dalmatia are moderately hard, the SO₄/Cl ratio is 0.38–1.6, non-corrosive (K₁ lower than 0.2) and not significantly mineralised (< 500 mg/L minerals). Sulphate waters are generally hard, the SO₄/Cl ratio is higher than 1.6, K₁ is 0.2–0.65. Marine waters are quite hard or hard, particularly at the river estuaries, the SO₄/Cl ratio is lower than 0.38, and K₁ is higher than 0.65. The groundwater and springs in Dalmatia are less polluted than surface waters. A majority of these have a geometric average value of MPN coli < 150/100 mL of water observed in 24 of 42 locations studied. The highest bacteriological pollution was found in nine locations where MPN coli > 1000/100 mL and moderate pollution was found in nine locations where MPN coli is between 150 and 1000/100 mL of water. The physical and chemical parameters determined for the most sources in Dalmatia are safe below the international permissible limits.     

Mercury and other elements in lichens near the INA Naftaplin gas treatment plant, Molve, Croatia

This paper describes the use of epiphytic lichens as bioindicators for spatial monitoring of mercury and other elements in air near the natural gas treatment facilities at Molve, Croatia. It is well known that at this location the concentration of mercury in natural gas is very high and therefore it has to be removed from natural gas before further processing in order to prevent technological and environmental problems. In order to monitor the efficiency of an industrial facility for removal of mercury from natural gas, mercury measurements in air and lichens were performed during 9 months in 1997/1998. In situ lichens Parmelia sulcata, Xantoria parientina and Hypogymnia physodes and transplanted lichen species Hypogymnia physodes were used. A good correlation between mercury concentrations in air and lichens was found. The concentrations of barium and bromium were also significantly elevated in transplanted lichens, most probably related to technological process at the gas treatment plant and/or other geological factors. It was confirmed that lichens can successfully be used as bioindicators, provided a careful experiment is designed, particularly the amount of lichens transplanted, the duration of exposure and the initial levels and homogeneity of transplanted lichens.     

Evaluating forest management practices using a GIS-based cellular automata modeling approach with multispectral imagery

The objective of this study was to develop an integrated geographic information system (GIS) cellular automata (CA) model for simulating insect-induced tree mortality patterns in order to evaluate the influence of different forest management activities to control insect outbreaks. High-resolution multispectral images were used to determine susceptibility of trees to attack, whereas the GIS-based CA model simulated the effectiveness of clear-cuts and thinning practices for reducing insect-induced tree mortality. The results indicate that thinning susceptible forests should be more effective than clear-cutting for reducing tree loss to insect outbreaks. This study demonstrates the benefits of an integrated approach for understanding and evaluating forest management activities and expresses the need for spatial analysis and modeling for improving forest management practices.     

Arsenic removal from water by chemisorption filters

The concept of multiple separation by chemisorptive filters was applied and investigated in the process of arsenic removal from water. Chemisorption filters were made by the paper manufacturing method and consisted of cellulose, cationic and anionic ion exchangers, activated carbon and a corresponding chemical agent. In this work chemisorption filters were activated with Ag+, Mg2+, Cu2+, Al3+ and Fe3+ ions, and their chemical contribution to total arsenic removal from the water was analyzed. It was concluded that Cu2+ ions exhibited the best removal effect. Using a chromatographic continuous system with multifunctional filters, which combines the effects of adsorption, ion exchange and filtration, a decrease in the arsenic concentration was determined; for an active layer of 8 mm and a contact time of 2 s it was more than 1000-fold. All processes were performed in batch and chromatographic continuous systems under equilibrium or dynamic conditions. The results of the investigations have shown that arsenic removal is valence dependent (the removal of pentavalent arsenic was more effective). The initial concentration, pH and pollutants in anionic forms, which affected the selectivity, were important for all the processes investigated. The mechanisms of pollutant removal were determined on the basis of measurements of active Cu2+ ion propagation inside the filter structure. By correlating the front propagation of active ions and the pollutant output concentration a more exact model for the removal process was obtained.     

Genotoxic consequences of occupational exposure to ethylene oxide and formaldehyde ‐ a pilot study

The study evaluates chromosome damage caused by simultaneous occupational exposure to ethylene oxide (EtO) and formaldehyde (FA). To determine the extent of chromosome damage, eleven workers were analyzed using chromosome aberration (CA) assay, sister chromatid exchange (SCE) frequencies, micronucleus (MN) assay, and mitotic activity (MA). The results show significant deviations in subjects exposed to EtO and FA from control values in all four assays. The study shows a complex mode of action of EtO and FA on human genome and confirms the need for further research of cytogenetic risk which should be obtained through several assays.     

Detection of elements and radioactivity in pellets from long-eared owls (Asio otus) inhabiting the city of Belgrade (Serbia)

In this study, we analysed pellets from long-eared owls (Asio otus) collected from four localities in Belgrade (Serbia). The pellets contained the remains of prey, namely voles (Arvicola terrestris) and field mice (Apodemus agrarius). The concentrations of 14 elements (Ca, P, Mg, Na, K, Fe, Zn, Sr, Ba, Mn, Ti, Cu, Si, B) were evaluated in whole pellets and in samples containing only bone tissue, which were dissected from the whole pellet. The increased levels of certain elements, including Mn, Zn, Ba, Cu and radioactive ⁴⁰K, indicate contamination of the soil by various sources, such as industrial plants and agricultural practices. From the results presented in this article, we suggest that the analysis of owl pellets may indicate the quality of the local environment.     

Pollution indices and sources appointment of heavy metal pollution of agricultural soils near the thermal power plant

Alluvial soils of valleys of the Danube and Mlave rivers represent priority development areas with favorable conditions for life, agriculture and tourism in eastern Serbia. Operation of the thermal power plant Kostolac results in the emission of potentially toxic pollutants into the air, water and land. The goals were to determine the soil pollution with inorganic pollutants using different pollution indices, to identify of the sources of pollutants by means of principal component analysis and the loading of each factor for individual element assessed by multi-linear regression analyses. Chemical characteristics of the studied area resulted in division of the area into four impact zones upon the distance from main pollutants (power plant blocks and ash disposal dumps). There was no established soil pollution with potentially toxic elements in bulk of the agricultural territory. Two principal components (PC1 and PC2) explained about 73% of variance. Three studied elements (As, Cu and Pb) showed anthropogenic origin of their most concentrations in soil, while other elements (Cd, Co, Cr, Ni and Zn) were of a natural (geological) origin. Single pollution index showed moderate pollution level by Ni. Integrated Nemerow pollution index showed low to no pollution levels, indicating slight ecological risk. There were no established limitations for agricultural production in the studied area, except for the only spot polluted by As due to the great flooding event in the studied year.