Catalytic gasification of tars from a dumping site

The work deals with catalytic gasification, pyrolysis and non-catalytic gasification of tar from an industrial dumping site. All experiments were carried out in a vertical stainless steel gasification reactor at 800 °C. Crushed calcined dolomite was used as the gasification catalyst. Parameters such as addition of water and air, and the influence of the catalyst in regard to the composition of the process gas were investigated. The catalytic gasification experiment in the steady state produced process gas with the composition: 56 % of H₂, 9 % of CO, 11 % of CH₄ and 12 % of CO₂ (mol.%). Concentration of the C₂ fraction was lower than 1 mol.%. Volume flow of air was later changed from 120 to 230 ml min^?1 reducing the amount of hydrogen to 51 mol.% and that of methane to 10 mol.%. Process gas created in a non-catalytic gasification process contained 26–30 mol.% of methane, 13–15 mol.% of carbon monoxide and 15–17 mol.% of the C₂ fraction and lower amounts of hydrogen (20 mol.%) and carbon dioxide (2–3 mol.%). The highest apparent conversion of tar was reached in the catalytic gasification processes. A higher rate of catalyst deactivation can be observed when water or air is not added.     

The effect of thiacloprid formulation on DNA/chromosome damage and changes in GST activity in bovine peripheral lymphocytes

The potential genotoxic effect of thiacloprid formulation on bovine peripheral lymphocytes was evaluated using the comet assay and the cytogenetic endpoints: chromosome aberrations (CAs), sister chromatid exchanges (SCEs) and micronuclei (MNi). Whole blood cultures were treated with the insecticide at concentrations of 30, 60, 120, 240 and 480 μg mL^?1 for 24, 48 h and/or 2 h of incubation. A statistically significant increase in the frequency of DNA damage, as well as in unstable chromosome aberrations (% breaks) were found after exposure to the insecticide at concentrations ranging from 120 to 480 μg mL^?1 (P < 0.05, P < 0.01, P < 0.001). For the detection of stable structural chromosome aberrations (e.g., translocations) and numerical aberrations by the FISH method, three whole chromosome painting probes for bovine chromosomes 1, 5 and 7 (BTA1, BTA5 and BTA7) were used in our experiments. We observed numerical aberrations, but without any statistical significance. Regarding the sister chromatid exchanges, no significant elevation in the SCE frequencies was found after 24-h exposure to the insecticide. A dose-related response in the SCE induction was obtained in bovine cultures after the prolonged time of exposure (48 h) to thiacloprid formulation at concentrations ranging from 120 to 480 μg mL^?1 in each donor (P < 0.05, P < 0.01), which was associated with a reduction of the PI (P < 0.05, P < 0.01). The insecticide failed to produce MNi; however, a significant reduction of CBPI was observed. Using real-time PCR, a decrease in the expression of bovine glutathione S-transferase M3 (GSTM3) was detected at the lowest dose. The higher concentrations of thiacloprid formulation caused an increase in the mRNA expression.     

Influence of a nickel smelter plant on the mineralogical composition of attic dust in the Tikveš Valley, Republic of Macedonia

Mineral phases and their content were determined in attic dust samples collected from 27 houses in the Tikve? Valley, Republic of Macedonia. By using quantitative X-ray diffraction, the principal mineral phases were determined to be the serpentinite group (chrysotile, lizardite) and amphibole group of minerals (ribecite, tremolite, actinolite) present in the attic dust samples from this region which are not common constituents of urban dust. Strong correlations existed between these mineral phases in the dust and those in ores processed at a ferronickel smelter plant situated in this region. Spatial distributions of specific mineral phases were made and were consistent with wind directions and predicted deposition (60–70 %) of dust emitted from the metallurgical plant.     

Geochemical and mineralogical characterization of a neutral, low-sulfide/high-carbonate tailings impoundment, Markušovce, eastern Slovakia

Tailings deposits generated from mining activities represent a potential risk for the aquatic environment through the release of potentially toxic metals and metalloids occurring in a variety of minerals present in the tailings. Physicochemical and mineralogical characteristics of tailings such as total concentrations of chemical elements, pH, ratio of acid-producing to acid-neutralizing minerals, and primary and secondary mineral phases are very important factors that control the actual release of potentially toxic metals and metalloids from the tailings to the environment. The aims of this study are the determination of geochemical and mineralogical characteristics of tailings deposited in voluminous impoundment situated near the village of Marku?ovce (eastern Slovakia) and identification of the processes controlling the mobility of selected toxic metals (Cu, Hg) and metalloids (As, Sb). The studied tailings have unique features in comparison with the other tailings investigated previously because of the specific mineral assemblage primarily consisting of barite, siderite, quartz, and minor sulfides. To meet the aims, samples of the tailings were collected from 3 boreholes and 15 excavated pits and subjected to bulk geochemical analyses (i.e., determination of chemical composition, pH, Eh, acid generation, and neutralization potentials) combined with detailed mineralogical characterization using optical microscopy, X-ray diffraction (XRD), electron microprobe analysis (EMPA), and micro-X-ray diffraction (μ-XRD). Additionally, the geochemical and mineralogical factors controlling the transfer of potentially toxic elements from tailings to waters were also determined using short-term batch test (European norm EN 12457), sampling of drainage waters and speciation–equilibrium calculations performed with PHREEQC. The tailings mineral assemblage consists of siderite, barite, quartz, and dolomite. Sulfide minerals constitute only a minor proportion of the tailings mineral assemblage and their occurrence follows the order: chalcopyrite?>?pyrite?>?tetrahedrite?>?arsenopyrite. The mineralogical composition of the tailings corresponds well to the primary mineralization mined. The neutralization capacity of the tailings is high, as confirmed by the values of neutralization potential to acid generation potential ratio, ranging from 6.7 to 63.9, and neutral to slightly alkaline pH of the tailings (paste pH 7.16–8.12) and the waters (pH 7.00–8.52). This is explained by abundant occurrence of carbonate minerals in the tailings, which readily neutralize the acidity generated by sulfide oxidation. The total solid-phase concentrations of metal(loid)s decrease as Cu?>?Sb?>?Hg?>?As and reflect the proportions of sulfides present in the tailings. Sulfide oxidation generally extends to a depth of 2 m. μ-XRD and EMPA were used to study secondary products developed on the surface of sulfide minerals and within the tailings. The main secondary minerals identified are goethite and X-ray amorphous Fe oxyhydroxides and their occurrence decreases with increasing tailings depth. Secondary Fe phases are found as mineral coatings or individual grains and retain relatively high amounts of metal(loid)s (up to 57.6 wt% Cu, 1.60 wt% Hg, 23.8 wt% As, and 2.37 wt% Sb). Based on batch leaching tests and lysimeter results, the mobility of potentially toxic elements in the tailings is low. The limited mobility of metals and metalloids is due to their retention by Fe oxyhydroxides and low solubilities of metal(loid)-bearing sulfides. The observations are consistent with PHREEQC calculations, which predict the precipitation of Fe oxyhydroxides as the main solubility-controlling mineral phases for As, Cu, Hg, and Sb. Waters discharging from tailings impoundment are characterized by a neutral to slightly alkaline pH (7.52–7.96) and low concentrations of dissolved metal(loid)s (<5–7.0 μg/L Cu, <0.1–0.3 μg/L Hg, 5.0–16 μg/L As, and 5.0–43 μg/L Sb). Primary factors influencing aqueous chemistry at the site are mutual processes of sulfide oxidation and carbonate dissolution as well as precipitation reactions and sorption onto hydrous ferric oxides abundantly present at the discharge of the impoundment waters. The results of the study show that, presently, there are no threats of acid mine drainage formation at the site and significant contamination of natural aquatic ecosystem in the close vicinity of the tailings impoundment.     

Air dispersion of heavy metals in the vicinity of the As-Sb-Tl abounded mine and responsiveness of moss as a biomonitoring media in small-scale investigations

A systematic study was carried out to investigate air deposition and to explore the natural distribution and enrichment (contamination) with trace elements in the small area (cca. 13 km²) of an antimony-arsenic-thallium mineralization outcrop at an abandoned mine “Allchar.” The mine is located on the northwestern part of Ko?uf Mount, Republic of Macedonia. The locality of Allchar is unique in its mineral composition; besides a very intriguing mineral, lorandite, there are 45 other minerals, some of which are rare. The distribution of 53 elements (with special attention to As, Sb, and Tl) were detected in 69 moss samples from eight various species collected from this area. Moss samples were analyzed following microwave digestion by inductively coupled plasma–mass spectrometry and inductively coupled plasma–atomic emission spectrometry. It was found that the atmospheric deposition for As in the moss samples on or around the Allchar mine is >6.5 times higher and for Tl is 19 times higher compared to values for the samples from the rest of the Allchar area. By the application of multivariate cluster and R-mode factor analyses (FA), five geochemical associations were determined. Cluster and R-mode FA were used to identify and characterize element associations, and five associations of elements were determined by the method of multivariate statistics. F1 (Co, Cr, Fe, Sc, Li, V, Ga, Y, Ni, Mn, Al, La-Lu, Cu, Ge, Be, Bi, and Hf); F2 (As, Tl, Sb, and Mg); F3 (Rb, Cs, and Mo); F4 (Sr, Ba, Hf, Zr, La-Lu, and Bi), and F5 (Cd, Zn, Ag, and Cu).     

Heavy metal bioaccumulation by wild edible saprophytic and ectomycorrhizal mushrooms

Heavy metals cause serious problems in the environment, and they can be accumulated in organisms, especially in the higher fungi. The concentration of Ni, Cr, Pb, Cd, and Hg in 10 species of edible mushrooms in Medvednica Nature Park, Croatia was therefore determined. In addition, the similarity between the studied species was determined by cluster analysis based on concentrations of the aforementioned metals in the fruiting bodies. The contents of nickel, chromium, lead, cadmium, and mercury in the fruiting bodies of mushrooms were obtained by X-ray fluorescence spectrometry. The highest concentrations of Ni (3.62 mg kg^?1), Cr (3.01 mg kg^?1), and Cd (2.67 mg kg^?1) were determined in Agaricus campestris. The highest concentration of Pb (1.67 mg kg^?1) was determined in Macrolepiota procera, and the highest concentration of Hg (2.39 mg kg^?1) was determined in Boletus edulis. The concentration of all heavy metals significantly differed (p?<?0.001) between examined saprophytic and ectomycorrhizal mushrooms. Considering anatomical part of the fruiting body (cap-stipe), a considerably higher concentration of the analyzed elements was found in the cap for all mushroom species. According to calculated bioconcentration factors, all the examined species were found to be bioexclusors of Ni, Cr, and Pb and bioaccumulators of Cd and Hg. Cluster analysis performed on the basis of the accumulation of the studied metals revealed great phenotypic similarity of mushroom species belonging to the same genus and partial similarity of species of the same ecological affiliation.

     

A biochar-based medium in the biofiltration system: Removal efficiency,microorganism propagation,and the medium penetration modeling

Biofiltration is a method of biological treatment belonging to cleaner technologies because it does not produce secondary air pollutants, but helps to integrate natural processes in microorganisms for decomposing volatile air pollutants and solving odor problems. The birch wood biochar has been chosen as a principal material for biofilter bed medium. The experiments were conducted at the temperatures of 24, 28, and 32 °C, while the concentration of acetone, xylene, and ammonium reached 300 mg/m³ and the flow rate was 100 m³/hr. Before passing through the stage of the experimental research into the packing material inside biofilters, microorganisms were introduced. Four strains of microorganisms (including micromycetes Aspergillus versicolor BF-4 and Cladosporium herbarum 7KA, as well as yeast Exophiala sp. BF1 and bacterium Bacillus subtilis B20) were selected. At the inlet loading rate of 120 g/m³/hr, the highest elimination capacity of xylene in the biochar-based biofilter with the inoculated medium was 103 g/m³/hr, whereas that of ammonia was 102 g/m³/hr and that of acetone was 97 g/m³/hr, respectively. The maximum removal efficiency reached 86%, 85%, and 81%, respectively. The temperature condition (though characterized by some rapid changes) can hardly have a considerable influence on the biological effect (i.e., microbiological activity) of biofiltration; however, it can cause the changes in physical properties (e.g., solubility) of the investigated compounds.

Implications: The birch biochar can be successfully used in the biofiltration system for propagation of inoculated microorganisms, biodegrading acetone, xylene, and ammonia. At the inlet loading rate of 120 g/m³/hr, the highest elimination capacity of xylene was 103 g/m³/hr, that of ammonia was 102 g/m³/hr, and that of acetone was 97 g/m³/hr, respectively. The morphological structure of biochar can be affected by the aggressive air contaminants, causing the change in the medium specific surface area, which is one of the factors controlling the biofilter performance. Although biological effects in biofiltration are typically considered to be more important than physical effects, the former may be more important for compounds with high Henry’s Law coefficient values, and the biofilter design should thus provide conditions for better compound absorption.     

Biologically active antimicrobial and antioxidant substances in the Helianthus annuus L. bee pollen

The objective of this study was to measure the content of flavonoids, polyphenols, and carotenoids in the Helianthus annuus L. bee pollen. It was also to evaluate the ability of the dried, frozen, and freeze-dried extracts of sunflower (H. annuus) pollen, its scavenged free radicals and reducing action. Another aim of this study was to investigate the antimicrobial in vitro action of the H. annuus pollen extracts against the Gram-positive and Gram-negative bacteria and fungi. All pollen extracts showed medium antiradical activity and reductive ability. The most effective was the freeze-dried extract in both evaluation systems. The evaluation of the protective effects of DNA using a biosensor showed an opposite trending—frozen ? dried ? freeze-dried pollen. For the evaluation of antiradical activity, the DPPH method was used, and reductive ability was assessed by means of phosphomolybdic complex formation. The comparison of the polyphenols content shows higher values in freeze-dried bee pollen than in the dried and frozen pollen. The highest content of flavonoids was found in the frozen samples and the most carotenoids were present in the dried samples. In our study, the best antibacterial effects of the dried sunflower bee pollen extracts were found against Paenibacillus larvae, Pseudomonas aeruginosa, and Enterococcus raffinosus. The best inhibitory properties of the frozen sunflower bee pollen extracts were found against Escherichia coli, Pseudomonas aeruginosa, and Paenibacillus larvae. Very good inhibitory effects of freeze-dried sunflower bee pollen were found against Paenibacillus larvae, Brochotrix thermosphacta, and Enterococcus raffinosus. The best antifungal activity of the sunflower bee pollen was found in the frozen bee pollen extracts against Aspergillus ochraceus and freeze-dried bee pollen extracts against Aspergillus niger.     

Alteration of cholinesterase activity as possible mechanism of silver nanoparticle toxicity

Due to their broad-spectrum antimicrobial activity, silver nanoparticles (AgNPs) have been used in a large number of commercial and medical products. Such proliferated AgNP production poses toxicological and environmental issues which need to be addressed. The present study aimed to investigate the effects of AgNPs on acetylcholinesterase (AChE) and butyrylcholinesterase (BChE), important enzymes in areas of neurobiology, toxicology and pharmacology. Three different AgNPs, prepared by the chemical reduction using trisodium citrate, hydroxylamine hydrochloride (Cl-AgNPs), and borohydride following stabilization with poly(vinyl alcohol), were purified and characterised with respect to their sizes, shapes and optical properties. Their inhibition potential on AChE and BChE was evaluated in vitro using an enzyme assay with o-nitrophenyl acetate or o-nitrophenyl butyrate as substrates, respectively. All three studied AgNPs were reversible inhibitors of ChEs. Among tested nanoparticles, Cl-AgNP was found to be the most potent inhibitor of both AChE and BChE. Although the detailed mechanism by which the AgNPs inhibit esterase activities remains unknown, structural perturbation of the enzyme may be the common mode of ChE inhibition by AgNPs.     

Direct electrothermal atomic spectrometric determination of Ag in aqua regia extracts of soils, sediments, and sewage sludge with matrix modification

Silver is subject to significant interferences caused by high chloride concentrations in electrothermal atomic absorption spectrometry, thus its direct determination in aqua regia leaches from soils, sediments, and sludges is very difficult, especially when using instrumentation equipped with deuterium-lamp background correction (D₂). In this study, the interference of the aqua regia medium was successfully eliminated using Pd–citric acid chemical modifier. This chemical modifier was found to be the most advantageous in comparison with Pd mixture with ascorbic acid, tartaric acid, or citric acid–Li based on its ability to suppress the interference originating from different chloride matrix. Palladium increases the analyte stability; citric acid serves as a reducing reagent, and furthermore, it helps to remove the interfering chlorides by forming HCl, in the drying step of the electrothermal program. In the presence of the modifier, the pyrolysis temperature can be adjusted up to 1,000 °C with no loss of the analyte. The obtained limit of detection and characteristic mass were 5 ng g^?1 and 1.7 pg, respectively. The accuracy of the method was verified by means of six different reference samples and by comparing the results of the analysis of real samples with those obtained by inductively coupled plasma orthogonal acceleration time-of-flight mass spectrometer. The proposed method was applied to the Ag determination in soils, sediments, and sewage sludge samples from the Pardubice region in Czech Republic.