Release of mobile forms of hazardous elements from glassworks fly ash into soils

The release of hazardous elements from the wastes of high-temperature processes represents a risk to the environment. We focused on the alteration of fly ash (FA) from glassworks collected from an electrostatic filter. FA contains elevated concentrations of Zn and Ba, among other elements. Overtime, small amounts of FA have been emitted from the factory and settled into the surrounding environment (soil). In order to assess the possible risks to the environment, samples of FA were placed in small nylon bags and deposited in 11 different soil horizons (containing diverse vegetation cover such as spruce and beech and also unforested areas). Samples of the FA in bags were exposed in the soils for 1 year. Then, the bags were collected, and the exposed soils in the direct vicinity of the FA bags were sampled. The total concentrations of Zn and Ba in the FA, as well as in the soil samples (original and exposed), were determined by ICP MS. The “mobile fraction” was determined as the exchangeable (acid extractable) fraction of the modified BCR sequential extraction procedure (SEP). The SEP results indicate that Zn and Ba may pose a potential environmental risk. Their concentrations in the first, most mobile, and bioavailable fraction increased in all the exposed soils. The most significant increases were observed in the upper soil horizons (litter and A horizon). The risk to the environment was evaluated on the basis of the Risk Assessment Code.     

Oral and inhalation bioaccessibility of potentially toxic elements in household dust from former Hg mining district,Idrija, Slovenia

Environmental Geochemistry and Health - One of the main sources of potential chronic exposure to potentially toxic elements is household dust, especially in an environment with known point sources...     

Principal component analysis of indicator PCB profiles in breast milk from Poland

Principal component analysis (PCA) was applied to a data set containing the levels of indicator polychlorinated biphenyls (PCBs) in human milk of mothers living in the Wielkopolska region, Poland, in order to investigate the information captured in the PCB patterns and to elucidate the relationship between PCB concentrations in milk and donor characteristics. According to the obtained PCA results milk fat content was the most influential factor affecting the PCB levels in milk of the Wielkopolska cohort. The lifestyle data collected from the questionnaire completed by the donors appeared to have no influence on PCB concentrations in breast milk. The score plots revealed the PCB contents of milk were quite low and uniform with a few outliers, without discrimination observed either between the primipareous and secundipareous females or between donors from the urban and rural areas. Comparison of the PCB levels and profiles of human milk from the Wielkopolska region and from various European and Asian locations made by PCA reflected a generally low background exposure and indicated the possible reasons for the outlying of some samples. In order to enhance the chances of observing the relationship between donor habits and PCB levels in breast milk it was suggested that the questionnaire be redesigned to gather information about vegetable product consumption and indoor air exposure.     

Terrestrial Biodiversity Analyses in Dalmatia (Croatia): A Complementary Approach Using Diversity and Rarity

Here we present the methodology used for terrestrial biodiversity analysis and site selection in Phase B of the UNDP/GEF COAST project. The analysis was focused on the problem of biodiversity evaluation in four Croatian counties stretching from sea level to the highest mountain in Croatia. Data on habitats, vascular flora, and fauna (mammals, birds, reptiles, amphibians, butterflies, ground beetles, and underground invertebrates) were collected and analyzed for each of the four counties. Emphasis was given to the richness of endangered species and the rarity of endemic species. Based on the spatial analyses of habitat, fauna, and flora data, four to six areas were selected from each county and ranked according to their biodiversity importance. Overlap between areas important for richness and those important for rarity was highest for data on flora (65.5%) and lowest for data on fauna (16.7%). When different data sets were compared, the lowest overlap was between flora and fauna (17.1%) and largest between fauna and habitats (23.9%). Simultaneous overlap among all three data sets was found in just 6.5% of the overall selected areas. These results suggest that less specific data, with respect to taxa threat status, could better serve as surrogate data in estimating overall biodiversity. In summary, this analysis has demonstrated that Dalmatia is a region with a high overall biodiversity that is important in a broader European context.     

Catalytic gasification of tars from a dumping site

The work deals with catalytic gasification, pyrolysis and non-catalytic gasification of tar from an industrial dumping site. All experiments were carried out in a vertical stainless steel gasification reactor at 800 °C. Crushed calcined dolomite was used as the gasification catalyst. Parameters such as addition of water and air, and the influence of the catalyst in regard to the composition of the process gas were investigated. The catalytic gasification experiment in the steady state produced process gas with the composition: 56 % of H₂, 9 % of CO, 11 % of CH₄ and 12 % of CO₂ (mol.%). Concentration of the C₂ fraction was lower than 1 mol.%. Volume flow of air was later changed from 120 to 230 ml min^?1 reducing the amount of hydrogen to 51 mol.% and that of methane to 10 mol.%. Process gas created in a non-catalytic gasification process contained 26–30 mol.% of methane, 13–15 mol.% of carbon monoxide and 15–17 mol.% of the C₂ fraction and lower amounts of hydrogen (20 mol.%) and carbon dioxide (2–3 mol.%). The highest apparent conversion of tar was reached in the catalytic gasification processes. A higher rate of catalyst deactivation can be observed when water or air is not added.     

The effect of thiacloprid formulation on DNA/chromosome damage and changes in GST activity in bovine peripheral lymphocytes

The potential genotoxic effect of thiacloprid formulation on bovine peripheral lymphocytes was evaluated using the comet assay and the cytogenetic endpoints: chromosome aberrations (CAs), sister chromatid exchanges (SCEs) and micronuclei (MNi). Whole blood cultures were treated with the insecticide at concentrations of 30, 60, 120, 240 and 480 μg mL^?1 for 24, 48 h and/or 2 h of incubation. A statistically significant increase in the frequency of DNA damage, as well as in unstable chromosome aberrations (% breaks) were found after exposure to the insecticide at concentrations ranging from 120 to 480 μg mL^?1 (P < 0.05, P < 0.01, P < 0.001). For the detection of stable structural chromosome aberrations (e.g., translocations) and numerical aberrations by the FISH method, three whole chromosome painting probes for bovine chromosomes 1, 5 and 7 (BTA1, BTA5 and BTA7) were used in our experiments. We observed numerical aberrations, but without any statistical significance. Regarding the sister chromatid exchanges, no significant elevation in the SCE frequencies was found after 24-h exposure to the insecticide. A dose-related response in the SCE induction was obtained in bovine cultures after the prolonged time of exposure (48 h) to thiacloprid formulation at concentrations ranging from 120 to 480 μg mL^?1 in each donor (P < 0.05, P < 0.01), which was associated with a reduction of the PI (P < 0.05, P < 0.01). The insecticide failed to produce MNi; however, a significant reduction of CBPI was observed. Using real-time PCR, a decrease in the expression of bovine glutathione S-transferase M3 (GSTM3) was detected at the lowest dose. The higher concentrations of thiacloprid formulation caused an increase in the mRNA expression.     

Influence of a nickel smelter plant on the mineralogical composition of attic dust in the Tikveš Valley, Republic of Macedonia

Mineral phases and their content were determined in attic dust samples collected from 27 houses in the Tikve? Valley, Republic of Macedonia. By using quantitative X-ray diffraction, the principal mineral phases were determined to be the serpentinite group (chrysotile, lizardite) and amphibole group of minerals (ribecite, tremolite, actinolite) present in the attic dust samples from this region which are not common constituents of urban dust. Strong correlations existed between these mineral phases in the dust and those in ores processed at a ferronickel smelter plant situated in this region. Spatial distributions of specific mineral phases were made and were consistent with wind directions and predicted deposition (60–70 %) of dust emitted from the metallurgical plant.     

Geochemical and mineralogical characterization of a neutral, low-sulfide/high-carbonate tailings impoundment, Markušovce, eastern Slovakia

Tailings deposits generated from mining activities represent a potential risk for the aquatic environment through the release of potentially toxic metals and metalloids occurring in a variety of minerals present in the tailings. Physicochemical and mineralogical characteristics of tailings such as total concentrations of chemical elements, pH, ratio of acid-producing to acid-neutralizing minerals, and primary and secondary mineral phases are very important factors that control the actual release of potentially toxic metals and metalloids from the tailings to the environment. The aims of this study are the determination of geochemical and mineralogical characteristics of tailings deposited in voluminous impoundment situated near the village of Marku?ovce (eastern Slovakia) and identification of the processes controlling the mobility of selected toxic metals (Cu, Hg) and metalloids (As, Sb). The studied tailings have unique features in comparison with the other tailings investigated previously because of the specific mineral assemblage primarily consisting of barite, siderite, quartz, and minor sulfides. To meet the aims, samples of the tailings were collected from 3 boreholes and 15 excavated pits and subjected to bulk geochemical analyses (i.e., determination of chemical composition, pH, Eh, acid generation, and neutralization potentials) combined with detailed mineralogical characterization using optical microscopy, X-ray diffraction (XRD), electron microprobe analysis (EMPA), and micro-X-ray diffraction (μ-XRD). Additionally, the geochemical and mineralogical factors controlling the transfer of potentially toxic elements from tailings to waters were also determined using short-term batch test (European norm EN 12457), sampling of drainage waters and speciation–equilibrium calculations performed with PHREEQC. The tailings mineral assemblage consists of siderite, barite, quartz, and dolomite. Sulfide minerals constitute only a minor proportion of the tailings mineral assemblage and their occurrence follows the order: chalcopyrite?>?pyrite?>?tetrahedrite?>?arsenopyrite. The mineralogical composition of the tailings corresponds well to the primary mineralization mined. The neutralization capacity of the tailings is high, as confirmed by the values of neutralization potential to acid generation potential ratio, ranging from 6.7 to 63.9, and neutral to slightly alkaline pH of the tailings (paste pH 7.16–8.12) and the waters (pH 7.00–8.52). This is explained by abundant occurrence of carbonate minerals in the tailings, which readily neutralize the acidity generated by sulfide oxidation. The total solid-phase concentrations of metal(loid)s decrease as Cu?>?Sb?>?Hg?>?As and reflect the proportions of sulfides present in the tailings. Sulfide oxidation generally extends to a depth of 2 m. μ-XRD and EMPA were used to study secondary products developed on the surface of sulfide minerals and within the tailings. The main secondary minerals identified are goethite and X-ray amorphous Fe oxyhydroxides and their occurrence decreases with increasing tailings depth. Secondary Fe phases are found as mineral coatings or individual grains and retain relatively high amounts of metal(loid)s (up to 57.6 wt% Cu, 1.60 wt% Hg, 23.8 wt% As, and 2.37 wt% Sb). Based on batch leaching tests and lysimeter results, the mobility of potentially toxic elements in the tailings is low. The limited mobility of metals and metalloids is due to their retention by Fe oxyhydroxides and low solubilities of metal(loid)-bearing sulfides. The observations are consistent with PHREEQC calculations, which predict the precipitation of Fe oxyhydroxides as the main solubility-controlling mineral phases for As, Cu, Hg, and Sb. Waters discharging from tailings impoundment are characterized by a neutral to slightly alkaline pH (7.52–7.96) and low concentrations of dissolved metal(loid)s (<5–7.0 μg/L Cu, <0.1–0.3 μg/L Hg, 5.0–16 μg/L As, and 5.0–43 μg/L Sb). Primary factors influencing aqueous chemistry at the site are mutual processes of sulfide oxidation and carbonate dissolution as well as precipitation reactions and sorption onto hydrous ferric oxides abundantly present at the discharge of the impoundment waters. The results of the study show that, presently, there are no threats of acid mine drainage formation at the site and significant contamination of natural aquatic ecosystem in the close vicinity of the tailings impoundment.     

Air dispersion of heavy metals in the vicinity of the As-Sb-Tl abounded mine and responsiveness of moss as a biomonitoring media in small-scale investigations

A systematic study was carried out to investigate air deposition and to explore the natural distribution and enrichment (contamination) with trace elements in the small area (cca. 13 km²) of an antimony-arsenic-thallium mineralization outcrop at an abandoned mine “Allchar.” The mine is located on the northwestern part of Ko?uf Mount, Republic of Macedonia. The locality of Allchar is unique in its mineral composition; besides a very intriguing mineral, lorandite, there are 45 other minerals, some of which are rare. The distribution of 53 elements (with special attention to As, Sb, and Tl) were detected in 69 moss samples from eight various species collected from this area. Moss samples were analyzed following microwave digestion by inductively coupled plasma–mass spectrometry and inductively coupled plasma–atomic emission spectrometry. It was found that the atmospheric deposition for As in the moss samples on or around the Allchar mine is >6.5 times higher and for Tl is 19 times higher compared to values for the samples from the rest of the Allchar area. By the application of multivariate cluster and R-mode factor analyses (FA), five geochemical associations were determined. Cluster and R-mode FA were used to identify and characterize element associations, and five associations of elements were determined by the method of multivariate statistics. F1 (Co, Cr, Fe, Sc, Li, V, Ga, Y, Ni, Mn, Al, La-Lu, Cu, Ge, Be, Bi, and Hf); F2 (As, Tl, Sb, and Mg); F3 (Rb, Cs, and Mo); F4 (Sr, Ba, Hf, Zr, La-Lu, and Bi), and F5 (Cd, Zn, Ag, and Cu).     

Heavy metal bioaccumulation by wild edible saprophytic and ectomycorrhizal mushrooms

Heavy metals cause serious problems in the environment, and they can be accumulated in organisms, especially in the higher fungi. The concentration of Ni, Cr, Pb, Cd, and Hg in 10 species of edible mushrooms in Medvednica Nature Park, Croatia was therefore determined. In addition, the similarity between the studied species was determined by cluster analysis based on concentrations of the aforementioned metals in the fruiting bodies. The contents of nickel, chromium, lead, cadmium, and mercury in the fruiting bodies of mushrooms were obtained by X-ray fluorescence spectrometry. The highest concentrations of Ni (3.62 mg kg^?1), Cr (3.01 mg kg^?1), and Cd (2.67 mg kg^?1) were determined in Agaricus campestris. The highest concentration of Pb (1.67 mg kg^?1) was determined in Macrolepiota procera, and the highest concentration of Hg (2.39 mg kg^?1) was determined in Boletus edulis. The concentration of all heavy metals significantly differed (p?<?0.001) between examined saprophytic and ectomycorrhizal mushrooms. Considering anatomical part of the fruiting body (cap-stipe), a considerably higher concentration of the analyzed elements was found in the cap for all mushroom species. According to calculated bioconcentration factors, all the examined species were found to be bioexclusors of Ni, Cr, and Pb and bioaccumulators of Cd and Hg. Cluster analysis performed on the basis of the accumulation of the studied metals revealed great phenotypic similarity of mushroom species belonging to the same genus and partial similarity of species of the same ecological affiliation.