Vegetation of the selected forest stands and land use in the Carpathian Mountains

Within the framework of the project "Effects of forest health on biodiversity with emphasis on air pollution in the Carpathian Mountains" 26 permanent study sites were established in the vicinity of the ozone monitoring sites. The study sites were located on the NW-SE transect through the Western (12 sites), Eastern (11 sites) and Southern (3 sites) Carpathians in forest ecosystems typical of each area. Some of the forest monitoring sites were located in national parks, biosphere reserves and areas of protected landscape. Each permanent site of 0.7 ha area consisted of 5 small 500m(2) circular plots, arranged in the form of a cross, i.e. four placed on the cardinal points (N, E, S, W) and one in the center. Phytosociological records were done twice during the 1998 growing season using the Braun-Blanquet's method. The study sites represented various types of forest: Picea abies stands (8), beech (Fagus sylvatica) stands (10), fir (Abies alba) stands (2) and mixed beech-fir, spruce-fir and beech-spruce stands (6). Age of most stands was 80-100 years. Degree of crown damage varied greatly between sites, a percentage of damaged trees decrease in Carpathians from West to East. It corresponds well with the O(3) level in these areas. Typical damage by O(3) in herb layer species in several Carpathian sites were found. Land-use map for the entire Carpathian Mountains and two detailed land use maps for Tatras (Western Carpathians) and Retezat (Southern Carpathians) are presented. A little more than half of the Carpathian territory is forested. The most densely forested are Eastern Carpathians, while the most sparsely Western Carpathians. Arable lands occupy 22.6% of the Carpathians, pastures and meadows 6.2%, water bodies 1.9%, and build up areas several percent. In the highest elevation of the Carpathians alpine meadows (11.3%) and rocks (3.5%) are distributed.     

Particulate matter on foliage of Betula pendula,Quercus robur,and Tilia cordata : deposition and ecophysiology

Trees in urban and industrial areas significantly help to limit the amount of particulate matter (PM) suspended in the air, but PM has a negative impact on their life. The amount of PM gathered on leaves depends on quantity, size, and morphology of leaves and can also be increased by the presence of epicuticular waxes, in which PM can become stuck or immersed. In this study, we determined the ability of PM to accumulate on leaves in relation to the species of tree and PM source. We tested saplings of three common European tree species (Betula pendula, Quercus robur, and Tilia cordata) by experimentally polluting them with PM from different sources (cement, construction, and roadside PM), and then assessing the effects of PM on plant growth and ecophysiology. In all studied species, we have found two types of PM accumulation: a layer on the leaf surface and an in-wax layer. Results showed that the studied species accumulate PM on their leaf blade, reducing the efficiency of its photosynthetic apparatus, which in a broader sense can be considered a reduction in the plants’ normal functioning. Saplings of Q. robur suffered the least, whereas B. pendula (especially photosynthetic rate and conductivity) and T. cordata (especially increase in leader shoot length) exhibited greater negative effects. The foliage of B. pendula collected the most PM, followed by Q. robur, and then T. cordata, regardless of the dust’s source. All tested species showed a tendency for higher wax production when growing under PM pollution stress. We believe that, potentially, B. pendula best enhances the quality of the PM-contaminated environment; however, faster leaf fall, reduced productivity, and worse quality of wood should be considered in urban forest management.     

Dimensions of Job Control in Computerized and Traditional Office Work and Its Health Effects

This study investigates whether a consistent relationship exists between computerization and job control. It also examines the role of job control as a predictor of stress symptoms typical for data entry and word processing (VDU) work. Two groups of VDU users and two comparable non-VDU-user groups took part in this study. A special questionnaire made it possible to assess global job control and four indexes of control related to specific aspects of work (control over choice of tasks and methods, control over time frame, control related to one’s skill, and control related to participation in the decision-making process). Results did not show an unequivocal relation between computerization and the latitude of control. The latitude of control depends on the task performed and the aspect of control we are considering. Regression analyses showed that global control is a good predictor of job satisfaction, some mood disturbances, and visual complaints. The other aspects of control are related in a variety of ways to stress symptoms. The role of a Type A behavior pattern in the relationship between job control and stress symptoms varies depending on which aspect of control is being considered. It was concluded that because of the high functional differences between various aspects of control, it is better to avoid using the concept of global control and, when possible, apply specific indexes of control.     

The modal low frequency noise of an elastically supported circular plate.

The modal low frequency noise generated by a vibrating elastically supported circular plate embedded into a flat infinite baffle has been examined. The main aim of this study is the analysis of the radiation efficiency. Low frequency approximated formulas have been presented. They are valid for all the limiting boundary conditions of the plate with its edge clamped, guided, simply supported or free as well as for all the intermediate axisymmetric boundary configurations. The formulas are expressed in the elementary form, useful for numerical computations. They are a generalization of some earlier published results. First, they are valid for axisymmetric and asymmetric modes since both kinds of modes play an important role in the low frequency range. Second, a single formula for the radiation efficiency, valid for all the axisymmetric boundary configurations, has been proposed. A numerical example for the sound power radiation has been given for some hatchway covers mounted on a ship deck.     

Developing a standard for psychosocial risk management: PAS 1010

The nature of work has changed dramatically due to globalisation, migration, technological advances and the emergence of the knowledge-based economy. These changes have been accompanied by the increased prevalence of new and emerging types of risk to workers’ health and safety, such as psychosocial risks. This paper reviews the key regulatory and voluntary standards on occupational health and safety of relevance to the management of psychosocial risks in the workplace that are applicable to the European Union member states. The review indicates that regulatory standards set the minimum level of protection for workers and voluntary standards may further enable organisations to go beyond their legal obligations. However, the review also highlights that the terms ‘stress’ and ‘psychosocial risks’ are not mentioned explicitly in most pieces of legislation leading to lack of clarity on the terminology used. While voluntary standards seek to address this, very few provide specific guidance on the process of psychosocial risk management to enable organisations to manage psychosocial risks successfully. On the basis of the review, the case for the development of a voluntary standard for psychosocial risk management is presented. The paper further discusses the recent development of such a standard and its implications at the European level.     

A vibroacoustic model of selected human larynx diseases.

With the present development of digital registration and methods for processing speech it is possible to make effective objective acoustic diagnostics for medical purposes. These methods are useful as all pathologies and diseases of the human vocal tract influence the quality of a patient's speech signal. Diagnostics of the voice organ can be defined as an unambiguous recognition of the current condition of a specific voice source. Such recognition is based on an evaluation of essential acoustic parameters of the speech signal. This requires creating a vibroacoustic model of selected deformations of Polish speech in relation to specific human larynx diseases. An analysis of speech and parameter mapping in 29-dimensional space is reviewed in this study. Speech parameters were extracted in time, frequency and cepstral (quefrency) domains resulting in diagrams that qualified symptoms and conditions of selected human larynx diseases. The paper presents graphically selected human larynx diseases.     

Social consequences associated with the use of various optimization methods in the protection of air quality

The fundamental tactics employed by the EU against air contamination, which are intended to maintain concentrations at a level that does not exceed the permissible values, usually entail considerable expense. To reduce this to a minimum, the procedure of economic optimization of air quality can be applied. When performed for a heavily polluted industrial city, it shows that it is possible to maintain concentrations below the threshold of air quality standards with relatively moderate expenditure. These evaluations also reveal that variations in population density distribution call into question the conventional wisdom that uniform air quality standards provide the best protection against air contamination for a whole region. On the contrary, an optimization that forces a drop in concentration to be evenly spread over the population, without reference to air quality standards, may lead to more efficient protection of human health and make no difference to overall expenditure.     

The effect of bed properties on methane removal in an aerated biofilter--model studies

The capacity of laboratory-scale aerated biofilters to oxidize methane was investigated. Four types of organic and mineral-organic materials were flushed with a mixture of CH₄, CO₂ and air (1:1:8 by volume) during a six-month period. The filter bed materials were as follows: (1) municipal waste compost, (2) an organic horticultural substrate, (3) a composite of expanded perlite and compost amended with zeolite, and (4) the same mixture of perlite and compost amended with bentonite. Methanotrophic capacity during the six months of the experiment reached maximum values of between 889 and 1036 g m⁻² d⁻¹. Batch incubation tests were carried out in order to determine the influence of methane and oxygen concentrations, as well as the addition of sewage sludge, on methanotrophic activity. Michaelis constants K_M for CH₄ and O₂ were 4.6-14.9%, and 0.7-12.3%, respectively. Maximum methanotrophic activities V_max were between 1.3 and 11.6 cm³ g⁻¹ d⁻¹. The activity significantly increased when sewage sludge was added. The main conclusion is that the type of filter bed material (differing significantly in organic matter content, water-holding capacity, or gas diffusion coefficient) was not an important factor in determining methanotrophic capacity when oxygen was supplied to the biofilter.     

Ozone distribution and phytotoxic potential in mixed conifer forests of the San Bernardino Mountains, southern California

In the San Bernardino Mountains of southern California, ozone (O(3)) concentrations have been elevated since the 1950s with peaks reaching 600ppb and summer seasonal averages >100ppb in the 1970s. During that period increased mortality of ponderosa and Jeffrey pines occurred. Between the late 1970s and late1990s, O(3) concentrations decreased with peaks approximately 180ppb and approximately 60ppb seasonal averages. However, since the late 1990s concentrations have not changed. Monitoring during summers of 2002-2006 showed that O(3) concentrations (2-week averages) for individual years were much higher in western sites (58-69ppb) than eastern sites (44-50ppb). Potential O(3) phytotoxicity measured as various exposure indices was very high, reaching SUM00 - 173.5ppmh, SUM60 - 112.7ppmh, W126 - 98.3ppmh, and AOT40 - 75ppmh, representing the highest values reported for mountain areas in North America and Europe.